Parts for Speed Queen AWN632SP116TW02: Graphic Panel / Control Support Panel / Controls Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a tapping screw with a hex head and Torx drive designed to fasten panels and components on Speed Queen laundry appliances. It provides a secure, vibration-resistant hold for repeatable service and repairs. What it does

• Fastens outer panels, brackets and internal parts where a self-tapping screw is required
• Holds components tight to prevent rattling or misalignment during operation
• Replaces missing, worn or stripped screws that cause loose or insecure parts
• Used when a screw must tap its own threads in sheet metal or thin substrates

• One tapping screw (hex head Torx)

• Use the correct Torx driver bit to avoid stripping the drive recess
• Drive straight and steady; do not over-torque to prevent thread or sheet-metal damage
• Follow OEM service instructions for panel removal and fastening order
• Disconnect power and follow safety precautions before servicing the appliance

This is a stainless-steel #8 x 1/2" Torx screw used to secure panels and components on Speed Queen appliances. Stainless construction resists corrosion for reliable fastened connections in laundry equipment. What it does

• Secures console, trim, panels, and internal brackets where a #8 x 1/2" Torx fastener is specified.
• Replaces missing or damaged screws that can cause loose panels, rattling, or misaligned components.
• Stainless-steel construction helps prevent rust in wet or humid laundry environments.
• Small, common fastener for service and reassembly after repairs.

• One stainless-steel #8 x 1/2" Torx screw.

• Use the correct Torx driver size to avoid stripping the screw head.
• Tighten finger-tight then snug; avoid over-torquing which can strip threads or crack plastic.
• Disconnect power (and water if applicable) before working on appliance internals to reduce shock or injury risk.

This is a 6-lobe hex washer head screw with a tri-lobe tamper-resistant drive and 8-32 x .690" length — used to fasten appliance panels and components securely. It matches OEM fit and finish for replacement. What it does:

• Secures control panels, brackets, and internal components to reduce movement and rattling
• Tamper-resistant tri-lobe drive helps prevent accidental loosening and unauthorized removal
• Corrosion-resistant finish maintains hold and appearance in humid laundry environments
• Restores proper assembly when factory screw is missing or damaged

• One screw

• Use the correct tri-lobe driver bit sized for the 6-lobe/tri-lobe head to avoid stripping
• Tighten until snug; do not over-torque to prevent head or thread damage
• Disconnect power and follow manufacturer safety instructions before accessing internal panels
• Replace all matching screws for consistent fit

The Control Board is an OEM part for Speed Queen commercial washers. It is the "brain" of the washer, controlling all electrically operated functions including cycles, settings, diagnostics and more.

Causes can be component fatigue or failure from years of consecutive usage. Heat, moisture and electrical fluctuations can degrade sensitive control board circuitry over time.

Symptoms of a bad control board include:

• No display or lights on the control panel
• Washer fails to start or doesn't progress through cycles
• Incorrect cycle times or temperatures
• Error codes indicating electrical issues

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This capacitive touch switch mounts behind the console and senses finger presses through the overlay, sending a signal to the control board. Replacing a failed switch restores consistent response from the affected touch button on touch-control machines.

• Detects user input at the touch area and communicates it to the main control
• Used for functions tied to specific keys (e.g., start, options, selections)
• Common failure signs: no response from a particular key, intermittent input, or needing excessive pressure
• Prevents a cycle from starting if the Start/Enter key's switch has failed

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access the console/control area; note connector orientation and wire routing
• Install the new switch in the same position and orientation as the original
• Use ESD protection when handling electronics; reassemble and verify keypad operation

The Capacitive Touch Foam is an OEM part for Speed Queen residential washers. It provides cushioning and comfort for users underneath the washer's capacitive touch control interface.

Over repeated use, this foam can deteriorate or become misshapen. Causes include regular wear and tear from hands contacting the panel daily.

Symptoms of a problematic touch foam include:

• Less tactile sensitivity of control buttons
• Dull, rigid feeling beneath touch controls
• Potential for cracks or breaks compromising cushioning

This right-side end cap is a replacement trim piece that restores the finished appearance of the washer control/top edge and protects edges from wear. It matches the original shape and color for a clean factory look. What it does:

• Covers and protects the right edge/end of the control/top trim to prevent exposed edges
• Restores appearance when the original cap is cracked, broken or missing
• Helps keep the trim secured and reduces the chance of snagging or catching
• Matches factory color and fit for a seamless replacement

• Disconnect power to the appliance before beginning any repair.
• Remove the affected trim or panel per the service manual to access the end cap.
• The cap typically snaps or slides into place; use a plastic pry tool to avoid damaging surrounding trim.

The Knob Assembly is an OEM component specifically designed for Speed Queen dryers. This assembly includes the control knob and integrated electronic components that allow for cycle and setting selection.

Causes of a defective knob assembly include normal wear of constantly rotated buttons, sun damage to exposed plastic knobs, and general use degradation of sealed electronic sensors over time. 

Symptoms of a bad knob assembly include:

• Knobs or buttons that do not select cycles properly   
• Faulty digital displays for time and settings
• Erroneous buzzers or error messages
• Unresponsive or stuck control functions

This OEM Speed Queen part is also compatible with products from American Dryer Corporation. Replacing the entire knob assembly restores full functionality to reliably control cycles on your dryer. Proper maintenance ensures long-term durability.
 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.