Parts for Ge AZ41E07DAPM2: Grille, Heater & Base Pan Parts

This control cover replaces the front cover over a room air conditioner's control panel. It restores a clean, finished look, protects the controls from dust and accidental contact, and helps keep the user interface securely positioned.

• Covers and protects the control board, switches, and display area
• Provides a labeled, easy-to-use interface and clean appearance
• Replaces cracked, broken, or missing covers that can expose wiring or cause rattling
• Helps buttons/knobs align and operate correctly

• Disconnect power and unplug the unit before servicing.
• Access the control area; remove the existing cover and retain screws/fasteners and any knobs as needed.
• Transfer any mounting clips or inserts from the old cover if present.
• Position and secure the new cover; verify the controls move freely and the cover seats properly.

The Air Filter is an OEM replacement part for GE refrigerators. This component plays a crucial role in maintaining air quality and freshness within the refrigerator compartment by trapping odors, pollutants, and airborne particles. It measures about 14-1/2 inches wide by 10 inches high.

Symptoms that may indicate the need to replace the air filter include:

•  Persistent unpleasant odors within the refrigerator
• Reduced air circulation or airflow
• Visible discoloration or clogging of the filter material

Causes of a faulty air filter can include normal wear and tear over time, accumulation of excessive debris or contaminants, or exposure to high humidity or moisture levels.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This support brace is a metal mounting bracket that helps secure and stabilize internal panels and components, restoring proper alignment and reducing vibration or sag in the appliance. Use when a damaged or loose brace allows movement or misalignment. What it does:

• Secures internal panels or assemblies to the cabinet to prevent shifting
• Restores proper alignment of doors, shelves, or internal components
• Reduces vibration and rattling caused by loose or broken supports
• Helps prevent further wear or damage from unsupported components

• Disconnect power and, if applicable, water before beginning any repair
• Remove any obstructing panels or shelves to access the mounting location
• Reinstall with the original fasteners; replace damaged hardware if necessary

This left-hand cabinet angle is a sheet-metal mounting bracket that secures a cabinet side to the appliance frame for stable alignment and fit. It helps keep the cabinet square and reduces gaps, vibration, and panel movement. What it does

• Provides a stable mounting point to secure the cabinet side to the appliance frame
• Helps maintain proper door/panel alignment and even gaps
• Reduces rattling, vibration, and shifting of the outer cabinet
• Restores correct fit after bumping or damage to the original bracket

• One left-hand cabinet angle bracket

• Disconnect power and, if applicable, water before beginning work
• Remove outer panels or trim to access mounting area
• Reuse original fasteners only if undamaged; replace stripped or bent screws
• Wear gloves to protect hands from sharp sheet-metal edges and work on a stable surface

This louver assembly is the refrigerator air-flow vent that directs cold air into the fresh-food compartment for more even cooling and temperature control. It replaces damaged or broken louvers to restore proper airflow and compartment performance. What it does:

• Directs and controls airflow from the evaporator to the fresh-food compartment
• Restores proper air distribution when the original louver is cracked, broken, or stuck
• Helps reduce uneven cooling and warm spots inside the refrigerator
• Replaces a warped or missing louver that can interfere with door closing or airflow

• Disconnect power to the appliance before beginning any repair.
• Handle plastic parts carefully to avoid cracking; some panels may have sharp edges.
• Usually accessible from inside the compartment once shelves and trim are removed; follow the service manual for your model.

This control cover replaces the front cover over a room air conditioner's control panel. It restores a clean, finished look, protects the controls from dust and accidental contact, and helps keep the user interface securely positioned.

• Covers and protects the control board, switches, and display area
• Provides a labeled, easy-to-use interface and clean appearance
• Replaces cracked, broken, or missing covers that can expose wiring or cause rattling
• Helps buttons/knobs align and operate correctly

• Disconnect power and unplug the unit before servicing.
• Access the control area; remove the existing cover and retain screws/fasteners and any knobs as needed.
• Transfer any mounting clips or inserts from the old cover if present.
• Position and secure the new cover; verify the controls move freely and the cover seats properly.

This louver is the replacement vent grille that restores proper airflow and keeps the appliance's condenser and components protected while improving the unit's appearance. Designed to fit the original mounting points for a clean, secure fit. What it does

• Directs and protects airflow to the condenser/vent area to help the appliance cool efficiently
• Covers and shields internal components from debris and accidental contact
• Restores a finished, OEM-look appearance when the original louver is cracked or missing
• Helps reduce rattling or vibration caused by a broken or loose grille

• Disconnect power to the appliance before servicing to prevent shock or injury
• Remove the existing grille/trim per the appliance service instructions; mounting may use clips or screws
• Handle carefully to avoid damaging mounting tabs; align to original mounting points for a secure fit

This protector holder secures a dryer thermal protector or thermal fuse in place, keeping the safety device mounted and stable so the appliance can monitor and interrupt heat when needed. It helps maintain proper alignment of the protector for reliable operation. What it does:

• Holds and positions a thermal protector or thermal fuse inside the appliance
• Keeps the safety device away from moving parts and airflow for accurate temperature sensing
• Supports proper electrical connection and prevents the protector from shifting or disconnecting
• Commonly replaced when the mounting clip is broken, cracked, or no longer secures the protector

• One protector holder

• Turn off power to the appliance before servicing to avoid electrical shock
• Use basic hand tools; avoid forcing the bracket to prevent breaking nearby plastic or clips
• If the protector or wiring shows damage, replace those parts as well rather than reusing compromised components

This heater assembly restores the defrost assist function in compatible dehumidifiers, helping clear frost from the coil so the unit can keep removing moisture efficiently. Replacing a failed heater helps prevent freeze-ups and maintain consistent performance in cooler rooms. What it does:

• Provides controlled heat to aid the defrost cycle and melt ice on the evaporator
• Helps maintain airflow and steady water collection in low-temperature conditions
• Common symptoms of failure: persistent coil icing, reduced moisture removal, repeated freeze-ups

• 1 heater assembly

• Disconnect power before servicing and allow components to cool
• Note wire routing and connector positions; transfer any clips/brackets from the old assembly if needed
• Mount in the original location with proper clearances from wiring and plastic parts
• After reassembly, run the unit and monitor for proper defrost operation

This thermostat regulates oven temperature to help maintain consistent cooking heat and proper bake/ broil cycles. It replaces a faulty temperature control to restore accurate oven heating. What it does:

• Senses oven temperature and signals the heating element to turn on or off
• Helps maintain set cooking temperatures for even baking and roasting
• Can stop the oven from reaching and holding the correct temperature when failing
• Common symptom: oven not heating, overheating, or temperature fluctuating during use

• One thermostat assembly

• Disconnect power to the appliance before starting any repair
• Mounts in the oven control area; handle the capillary/tube gently to avoid kinks
• Some installations may require knob removal or access behind the control panel

This special screw is a direct-replacement fastener used to secure internal or exterior appliance components, restoring proper fit and reducing movement that can cause noise or misalignment. What it does

• Fastens panels, brackets or component assemblies to keep parts aligned and secure
• Stops rattling or vibration caused by loose or missing hardware
• Replaces damaged or stripped screws that prevent proper assembly
• Helps maintain safe, stable operation by restoring correct part fit

• One replacement special screw

• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Use the correct screwdriver or bit to avoid cam-out and thread damage
• Tighten until snug; do not overtighten to prevent stripping or cracking surrounding parts
• Keep small parts away from children and dispose of old hardware properly