Parts for Mtd 31AH8DSH799: Handles / Engine Spacer Parts

Replace your snowblower's clutch handle assembly if the original is cracked, broken, or worn. This handle installs on the control panel for operator control.

E-ring retaining clip for snowblower assemblies. Secures pins and shafts in place. Replace if bent, missing, or worn to restore proper retention.

Handle panel assembly for gas snowblowers. Mounts to control area of machine. Replace if cracked, broken, or damaged from impact or wear.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Pivot rod for gas snow throwers. Connects control lever to moving components. Replace if bent, broken, or worn to restore proper mechanical operation.

Fastening screw for snowblower component assembly. Replaces lost, stripped, or damaged screws that secure panels, covers, or internal parts.

Replace missing or damaged socket screws in your snowblower. Fastens components securely. Often lost during maintenance or repair work.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Hex nut with thread-locking patch for snow thrower assembly. Secures components throughout the machine. Replace if stripped, missing, or damaged.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

Replacement shift knob for snowblower control lever. Installs on the shift rod to adjust speed and direction. Replace if cracked, broken, or missing.

LED headlight assembly for snowblowers. Replace if light fails, dims, or cracks from impact. Verify fit with your model number before ordering.

This trigger is a genuine MTD part that can be used as a replacement part for a snowblower operated by power steering. The trigger is located under the handlebars of a snowblower and functions as a crucial feature of the appliance's power steering capabilities. The trigger is connected to the tires through a network of cables through the engine, allowing effortless turning capabilities, even on tough, sharp turns. A trigger might have to be replaced if its material shows signs of deterioration, including bending, cracking, tearing, or melting. This deterioration can be attributed to general overuse or long-term exposure. If a trigger is subject to any of this kind of damage, it is best to replace it before using the snowblower, as the malfunctioning trigger might affect the power steering capabilities of the snowblower, creating an unsafe work environment and the possibility of permanent or unnecessarily extensive damage. Always wear gloves when handling, repairing, and operating outdoor equipment. This trigger is compatible with the brands MTD, Troy-Bilt, Yard Machines, and Cub Cadet.

This part is a replacement lock plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective lock plate on snowblowers. This lock plate works by locking the auger handle securely into position when the user is adjusting the snowblower chute. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. Proper tools may be required to install this part. For more accurate information on how and where to install this lock plate, the appropriate owner's manual and equipment diagrams should be referenced. This lock plate is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with snowblowers that have been manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, Husky, and Troy-Bilt.

Snowblower won't engage or auger slips during operation? This cam clutch lock secures the drive mechanism. Common repair for engagement issues.

Clutch lock spring for gas snowblowers. Secures the clutch mechanism in position. Replace if spring is stretched, broken, or missing to restore proper function.

This part is a replacement handle lever bumper. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or misplaced handle lever bumper in snow blowers.The handle lever bumper provides some cushioning between the frame of the handle and the control lever, making it easier for the user to operate the snow blower. If this part is damaged or misplaced, it will need to be replaced to ensure optimal functionality. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular handle lever bumper, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality rubber. This handle lever bumper can be used with a variety of snow blower models manufactured by Craftsman, MTD, and other brands.

Flat washer for lawn tractors and outdoor power equipment. Replaces worn, missing, or damaged washers. Ensures secure fastening of components.

Shoulder screw for gas snowblowers and walk-behind mowers. Replace this fastener if worn, stripped, or missing to secure moving components properly.

Shoulder screw fastener for gas snowblowers. Secures components with precise spacing. Replace if threads are stripped, head is damaged, or screw is missing.

Steering trigger pin for snowblowers. Secures the steering trigger mechanism. Replace if pin is bent, sheared, or missing to restore proper control.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

Hex head self-tapping screw for outdoor power equipment. Securely fastens components throughout your machine. Replace if missing, stripped, or worn.

Carriage bolt for lawn mowers, snow blowers, tillers, and edgers. Works with a nut to secure metal components. Replace if worn, stripped, or missing.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Snowblower headlight lens protects the bulb and ensures visibility during low-light operation. Replace when cracked or clouded. Verify fit with model.

Secures bolts and prevents loosening on mowers and tractors. This hex jam nut locks standard nuts in place for reliable fastening. Easy installation.

Hex jam nut fastener for lawn mowers and tractors. Secures components and hardware throughout the machine. Replace if stripped, rusted, or missing.

Secures pins and shafts on lawn tractors and riding mowers. Replace if bent, missing, or worn. Bow-tie design inserts through pre-drilled holes.

Ball joint assembly for lawn tractor steering systems. Secures tie rod ends and drag links. Replace if cracked, worn, or damaged to restore proper steering.

This durable metal screw is designed to be used on many types of lawn and garden equipment, such as lawnmowers and snowblowers. The screw can be used to attach different components together so they stay stable and connected to ensure the equipment works correctly. It can be used on a variety of materials including metal, plastic, bricks, and wood. If the screw needs to be replaced, a visual inspection will indicate that. Screws often become damaged over time or can even break. Some screws also become stripped and no longer do what they are intended for. A hex wrench can be used to remove this screw from the machine so the new one can be installed. After installing the replacement screw, it should be tightened to ensure the materials it brings together are kept flush.This screw is made for use with lawnmowers, snowblowers, chipper shredders, and lawn tractors manufactured by MTD, Yard Machines, Yard-Man, and Troy-Bilt. It is sold as an individual part. This is an authentic OEM replacement part that is sourced directly from the manufacturer. A hex wrench may be needed for the replacement.

Push-on nut for lawn tractors and snow throwers. Secures components in place. Replace if missing, damaged, or no longer holding firmly during operation.

Replacement shoulder screw for snowblowers. Secures components together during operation. Order a new screw if yours is stripped, missing, or damaged.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

Idler pulley assembly for gas snowblowers. Maintains proper belt tension for auger and drive system. Replace if worn, noisy, or belt slips. Verify fit.

Shoulder spacer for gas snowblowers and tillers. Installs between components to maintain proper spacing and alignment. Replace if worn or missing.

Replace a broken or worn torsion spring on your gas snowblower. This spring provides tension for drive mechanisms and control levers. Order today.

This hex screw is a genuine MTD part. A hex screw can be used as a replacement part in refrigerators, humidifiers, lawn mowers, snowblowers, tillers, log splitters, and wood chippers. The purpose of this genuine OEM part is to stabilize and secure the placement of components within the internal or external machinery of one of these appliances.In lawn equipment a screw might easily be lost, misplaced, or damaged; if this occurs, the screw should be removed and replaced by this genuine OEM replacement part so that all components can maintain their placement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex screw is compatible with equipment manufactured by MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Sub Zero, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

Repair snow thrower belt slipping or disengaging with this idler bracket. Restores proper belt tension for drive system. Moderate difficulty repair.

Pulley adapter for snowblowers. Connects drive components in the transmission system. Replace if worn, cracked, or damaged to restore proper fit.

Hex cap screw for snowblowers and outdoor power equipment. Secures engine, deck, or housing components. Replace if stripped, rusted, or missing.

If your snowblower won't throw snow or the auger doesn't turn, this auger belt restores power transfer. Common wear part for reliable winter operation.