Parts for Mtd 21AB47M6099: Handles / Tine Shield Parts

This hex screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in many different applications in lawn and garden equipment and can be used on many different machines. If the hex screw is missing or loose due to deterioration, a new hex screw should be installed. Hex head screws are removed and replaced using a hex wrench. Screws are used to secure one part of a machine to another part. This hex head screw is not self-tapping, it is designed for pre-drilled holes. Most applications will require a washer and bolt to secure the screw, but there are applications where the screw is inserted into parts that do not have an opening on the other side and so the screw does not need to bolt. Wear gloves when working with screws and outdoor equipment. This hex head screw is made of hardened metal and is sold as an individual unit. This hex head screw can be used on many different model machines manufactured by MTD, Ryobi, Murray, YardMan, Bolens, Cub Cadet, and Husky.

This is a quality clevis pin that is made for many types of lawn and garden equipment. It secures two components together. A clevis pin has a hole at the end where a cotter pin can be attached to secure it in place. Clevis pins can become damaged or corroded over time, which will require them to be replaced.If a damaged clevis pin is difficult to remove, it can be sprayed with penetrating oil and allowed to sit for several hours. This should make it easier to remove the cotter pin from the clevis pin. If it doesn't budge, use a pry bar to loosen the clevis pin.This is an authentic OEM replacement clevis pin directly sourced from the manufacturer. It is sold as a single pin. The clevis pin is designed to be used with lawnmowers, tillers, and snowblowers manufactured by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Husky, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

The cotter pin is a fastener that is commonly used in lawn and garden equipment. The cotter pin helps provide a secure, locking fit that is adjustable and easy to remove. The cotter pin is commonly used on axles and rods, but it can have many applications depending on the machine and model. Cotter pins can become worn or break down over time because they are exposed to constant vibrations. It is important to replace damaged or broken cotter pins immediately as a broken part can render the equipment useless in many cases. This cotter pin is designed to exact OEM standards by MTD, and is designed for use in various equipment from MTD, Troy-Bilt, Craftsman, RYOBI, Yard Machines, Hard Man, Poulan, Husky, Bolens, and Cub Cadet. This is a 5/16 cotter pin that features a #34 diameter, and is made of a durable metal. This part is sold individually and those who require more than one will have to order multiple quantities. No other hardware is included. Always wear gloves when working on lawn and garden equipment.

A cotter pin is a small but necessary part found in many pieces of outdoor lawn & garden equipment and machinery. It is a type of split pin, which is a metal fastener featuring two tines that are bent during installation to fasten metal together. It designed for use especially with lawn tractors and is compatible with products by the following brands: MTD, Craftsman, Cub Cadet, Yard Machines, MasterCut, Bolens, Yard-Man, and Troy-Bilt.The low cost, availability, and extreme versatility of these cotter pins mean that they are used in countless machines nearly everywhere. Since this is a standard piece of hardware used frequently with lawn and garden equipment, it is important that the user refers to the appropriate diagrams of his or her unit to ensure the part is installed correctly.This cotter pin is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this particular cotter pin is MTD.

This part is a replacement shift rod knob. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or faulty shift rod knob in tillers.The shift rod knob enables the user to easily and comfortably shift the tiller gears. It will need to be replaced if worn, broken, detached, or lost. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular shift rod knob, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This shift rod knob can be used with a variety of different tiller models manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This replacement part is a throttle knob. This part is a genuine replacement part made by MTD. This part is typically found in lawn mowers and assists the user in controlling the throttle of the machine properly. The throttle then adjusts the settings inside the engine so that the user is able to control the speed and power of the appliance. A new throttle knob might be needed if the current one is damaged or missing in any way. It is possible that over time this part might become worn down with normal wear and tear and need to be replaced. This part is made of durable plastic and should be fairly simple to replace. This throttle knob is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This flat washer is a genuine MTD part, sold individually. This flat washer can be used as a replacement part in lawnmowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of a flat washer for one of these small engine outdoor appliances is to prevent friction between one or more components while also creating spacing between components.The flat washer in a small engine outdoor appliance is a very small component that can be easily lost or misplaced at any point during its typical lifespan. The flat washer could also suffer damage during the course of general use, and if the damage to the flat washer precludes it from reducing friction and spacing one or more components, the flat washer should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This flat washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

The cable barrel holder securely holds the clutch cable against the clutch control handle on many types of lawn and garden equipment. The part is made of durable plastic and plays a large part in ensuring the lawn equipment works properly. Through use and time, the cable barrel holder can become damaged or break and will need to be replaced.If the cable barrel holder snaps or is otherwise damaged, the first step is to take the equipment and put it on a flat surface. Remove the spark plug wire and wear a pair of work gloves. The broken cable barrel holder can be removed using a screwdriver and a socket set. Once it has been taken off, the new component can be installed in its place with the cable running through it.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The cable barrel holder is made to be compatible with lawnmowers, tillers, and snowblowers manufactured by MasterCut, Yard-Man, Montgomery Wards, Huskee, MTD, Yard Machines, Husky, Cub Cadet, and Craftsman.

This is a replacement depth bar for a tiller. The depth stake is a metal bar that attaches vertically to the back of the tiller. It can be adjusted to limit the tiller's forward motion, which in turn allows the machine to dig more deeply into the ground to break up the soil. The depth bar is especially useful when working in hard, compacted ground. When used properly, the depth bar allows the tiller to break the soil into smaller pieces. Alternatively, the depth stake can be raised, or even removed when the soil conditions are softer. The depth bar is easily and conveniently adjusted to till to the desired level.The depth bar may break with normal use, or if it hits hard objects in the soil. Luckily, removal and replacement of the depth stake is very easy. All it takes is a socket wrench to remove the nut and bolt, the torsion spring, and then ultimately the depth bar. This repair can be done in a matter of minutes. This is a genuine OEM replacement depth bar and is sold individually. It is built to work with multiple tillers, including various models made by Ryobi, MTD, Yard Machines, and Yard Man.

This part is a replacement hex bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current hex bolt is broken, stripped, or in any way damaged, this part can be used as a replacement. It is intended for use with outdoor power equipment.Hex bolts are named because of their hexagon shape and are a standard piece of hardware with different uses. Bolts are essential for securing parts of the equipment together properly and should be replaced if corroded, stripped, lost, or otherwise defective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this hex bolt, the appropriate owner's manual and equipment diagrams should be referred to. This hex bolt is suitable for use on outdoor power equipment manufactured by Craftsman, MTD, Troy-Bilt, Cub Cadet, and Yard Man. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

This genuine replacement part is a MTD flat washer flange sized .339 X .640 inch X .033 inch. This MTD flat metal washer flange has a variety of applications for many types of equipment including lawn mowers, snow blowers, tillers, edgers, and log splitters. Washers are important to the proper functioning of the product. They spread the load of a threaded fastener, such as a bolt or nut, or can be used as a spacer. However, they can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This MTD flat washer flange has multiple applications in a wide range of products from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery, Wards, Bolens, Yard-Man, Turf King, MasterCut, and more. Please note: original part number 166763 is now obsolete, and manufacturer has replaced the original part number with this part.

This replacement part is a washer. This is a genuine replacement part made by MTD. Washers are small but extremely important part of many different machines or appliances. Washers allow for parts to stay secure and connected in place during use. Washers typically work with other small parts such as screws and nuts to ensure the proper functioning of the machine.A new washer might be needed if the current ones are visibly missing or damaged. Washers can become worn down over time due to normal wear and tear. If this is the case it is recommended that it be replaced or repaired. This repair should be fairly easy and only require common household tools. Be sure the engine is completely powered down before attempting to replace this part.This washer is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This replacement part is a tiller flap intended for use on lawn mowers. It protects the user and equipment from flying debris that might cause harm during use.A new tiller flap might be needed if the current one is missing or damaged at all. This can include the part being torn, bent, or cracked in any way. This part can be damaged after years of normal wear and tear and should be replaced if this is the case. Be sure the engine is powered off before attempting to replace or repair this part. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This side shield is a genuine MTD part, sold individually. This side shield can be used as a replacement part in a tiller. The purpose of the side shield is to facilitate the proper depth of tilling as well as to keep the tilled rows even across the soil while the appliance is in operation.If the side shield has been punctured, cracked, dented, eroded, or otherwise irreparably damaged, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This side shield is compatible with the following outdoor appliance brands: MTD, Craftsman, Huskee, and MasterCut.

This rear tine shield is a genuine MTD part, sold individually. This rear tine shield can be used as a replacement part in a tiller. The purpose of the rear tine shield in a tiller is to protect and house the tines and the area around them.If the rear tine shield is punctured, cracked, dented, warped, or eroded to that point, the rear tine shield should be removed and replaced by this genuine OEM replacement part in a timely manner such that the safe continued use of the tiller can be guaranteed.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This rear tine shield is compatible with the following outdoor appliance brands: MTD and Craftsman.