Parts for Broan 113123: Hideaway Hood Parts

This is a replacement mounting screw designed to secure components and panels on compatible Broan appliances. It restores proper fastening to reduce rattles, loose trim, or parts that no longer stay in place. What it does:

• Secures panels, covers, brackets, or small components to restore proper alignment and stability
• Replaces missing or stripped screws that can cause vibration, noise, or loose parts
• Matches the OEM fit for reliable retention when the correct hole and threads are present
• Helps maintain safe operation by keeping protective covers and guards fastened

• Use the correct driver and turn until snug; do not overtighten to avoid stripping or cracking
• Disconnect power to the appliance or follow manufacturer safety guidance when accessing internal parts
• Keep removed hardware and fittings organized to ensure correct reassembly

A single replacement mounting screw used to fasten components on compatible Broan ventilation units. Restores secure assembly to reduce vibration, rattling or loose panels and keep parts aligned for proper operation. What it does:

• Secures panels, brackets or small components to the appliance chassis
• Prevents rattling and vibration caused by missing or loose fasteners
• Keeps motor and blower assemblies properly aligned when used in original mounting locations
• Helps maintain a safe, stable installation of ventilation components

• Disconnect power to the appliance before servicing to prevent electrical shock
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten snugly but avoid over-torquing to prevent damage to threads or sheet metal
• Keep removed hardware organized so all fasteners are reinstalled

This wire harness routes power and signals between the hood's motor, lights, switches and controls to restore electrical connectivity and proper operation. It replaces a damaged or burnt wiring assembly to help clear electrical faults. What it does:

• Connects the blower motor, light sockets, and control switches to the hood's power supply
• Restores broken or corroded wiring paths that can cause intermittent operation or complete failure
• Helps stop arcing, shorts, or blown fuses when the original harness is damaged
• Enables proper function of speed switches and lighting circuits once installed

• One complete wire harness assembly as shown

• Disconnect power to the appliance at the breaker before starting any work
• Verify connector orientations and secure all wiring with the original clips or mounts
• Inspect adjacent components for heat or damage that could have affected the harness

This is a direct replacement part sold under the manufacturer's part number for use with compatible ventilation and range hood products. It provides a like-for-like swap when the original component fails, restoring normal function. What it does

• Replaces a failed or damaged factory part to restore appliance operation.
• Prevents intermittent or complete loss of the related feature when installed correctly.
• Helps avoid makeshift repairs that can cause further damage or unsafe operation.
• Works only in models specified by the manufacturer for this part number.

• One replacement part as shown and labeled by the manufacturer.

• Disconnect power to the appliance before attempting any repair to avoid shock or injury.
• Use proper tools and secure fasteners to the manufacturer's specifications; do not force parts into place.

Replace your range hood's damper flap if cracked, broken, or missing. This flap installs in the ductwork to control airflow and prevent backdrafts.

Cushioning bumper that mounts on the compactor door to prevent noise and impact damage. Replace if cracked, compressed, missing, or no longer cushions.

This is a replacement Broan part sold as a single unit to restore factory operation when an exact component has failed. Use this listed part only when your appliance requires the matching OEM part number. What it does:

• Replaces the factory component associated with the listed OEM number
• Restores the original fit, form, or function when the matching part is installed
• Helps address symptoms caused by a failed or damaged component when it matches the appliance's PN
• Use only if your appliance requires part number 99150418

• One replacement part as listed by the OEM

• Verify the OEM part number on your appliance before ordering
• Disconnect power to the appliance before attempting service
• Follow all OEM instructions and safety warnings when installing

This listing is for a Broan replacement part that is currently unidentified in our catalog. Order only if you have confirmed this exact part number matches the component you need — it replaces the specific OEM piece shown by number. What it does

• Serves as a direct OEM-numbered component for Broan equipment when correctly matched by part number
• Used to restore the original function of the appliance when the correct part is installed
• Can address failures or missing components associated with the unknown part number when properly identified
• Useful for technicians or owners who have verified the part number on their unit

• Verify the part number on the appliance or service manual before ordering; this listing lacks a vendor description
• Disconnect power to the appliance before attempting service to avoid shock or injury
• Keep original packaging and labels until fit and function are confirmed

Rubber bushing that reduces vibration and noise in range hood assemblies. Replace if worn, cracked, or missing to restore quiet operation and stability.

Replace a range hood motor that won't spin or runs loud. Restores proper airflow and ventilation. Moderate DIY repair, typically 1-2 hours with cleaning.

This is a replacement mounting nut that secures hardware and components on compatible Broan appliances, restoring proper fastener retention and preventing looseness. What it does

• Fastens and secures panels, brackets, or components in place
• Prevents vibration-related loosening that can cause rattling or misalignment
• Replaces missing or damaged thread hardware for safe, reliable attachment
• Used wherever the corresponding bolt/stud requires a matching nut to hold parts together

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct wrench or socket size to avoid stripping the nut or mating threads
• Thread the nut on by hand first, then snug with a tool; avoid overtightening
• Inspect mating bolt/stud and threads for damage; replace if stripped or corroded

This ballast transformer restores proper power regulation to the appliance lighting circuit so bulbs operate reliably and safely. Designed for use as a direct replacement to revive dim, flickering, or non-working range-hood/vent hood lamps. What it does:

• Regulates voltage to the appliance lighting system so lamps start and run consistently
• Helps eliminate dimming, flicker, or intermittent light failures tied to a faulty ballast
• Works with the hood's existing lamp sockets and wiring to restore normal lighting operation
• Supports service-level replacement where the original ballast has failed

• Service-replacement part — disconnect power to the appliance before starting work
• Handle carefully to avoid damage to terminals; secure mounting per original hardware

This is a direct replacement part sold under the manufacturer's part number for use with compatible ventilation and range hood products. It provides a like-for-like swap when the original component fails, restoring normal function. What it does

• Replaces a failed or damaged factory part to restore appliance operation.
• Prevents intermittent or complete loss of the related feature when installed correctly.
• Helps avoid makeshift repairs that can cause further damage or unsafe operation.
• Works only in models specified by the manufacturer for this part number.

• One replacement part as shown and labeled by the manufacturer.

• Disconnect power to the appliance before attempting any repair to avoid shock or injury.
• Use proper tools and secure fasteners to the manufacturer's specifications; do not force parts into place.

This is a fan speed control switch used in range hoods and ventilation systems. It allows the user to select different fan speeds for removing smoke, steam, and cooking odors from the kitchen. Replace this switch if the fan no longer responds to speed changes, stays stuck on one setting, or fails to turn on or off.

Replace your range hood lamp holder when bulbs won't stay secure or light fixtures fail. Restores proper bulb connection and illumination. Verify fit with your model number.

Secures range hood panels, filters, or grilles in place to prevent rattling and displacement. Replace if clip is damaged, broken, or no longer holds firmly.

Fix a range hood light or fan that won't turn on or off with this rocker switch. Restores manual control when switches stick or fail to respond.

This replacement screw secures trim, panels, and internal components on compatible Broan appliances to restore a solid fit and reduce rattling or loose parts. Use it to replace missing or damaged fasteners and maintain safe operation. What it does:

• Secures mounting brackets, trim pieces, or internal assemblies
• Prevents panels from vibrating, rattling, or coming loose
• Restores proper alignment and fit of affected components
• Helps stop intermittent contact or movement that can cause noise

• Disconnect power to the appliance before servicing to reduce electrical and injury risk
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Keep removed hardware organized and reuse only matching OEM fasteners

This screw is a direct replacement fastener used to secure range hood and ventilation components. It restores proper fit and helps stop loose panels or rattling for a stable, safe appliance. What it does:

• Secures panels, brackets, or housing components to prevent movement and vibration
• Restores proper alignment of covers, filters, or internal parts
• Helps eliminate rattling noises caused by loose fasteners
• Works with compatible Broan range hood and ventilation assemblies

• Disconnect power to the appliance before servicing to reduce shock risk
• Use the correct driver or bit to avoid stripping the screw head
• Thread carefully and avoid overtightening to prevent damage to mounting holes or plastic parts

A small flat washer that helps secure fasteners and evenly distributes clamping force to protect parts and reduce loosening or wear. Commonly used on mounting screws and appliance panels to improve fit and stability. What it does:

• Spreads load from a screw or bolt to prevent damage to mounting surfaces
• Helps keep fasteners tight and reduces the chance of loosening or vibration
• Prevents metal-on-metal contact, reducing wear and noise
• Useful when replacing corroded, bent, or missing washers that cause rattling or loose panels

• Disconnect power to the appliance before servicing and follow all safety precautions
• Use the correct screw/bolt size and washer orientation—replace like-for-like
• Inspect mating hardware and threads; replace damaged fasteners if needed
• Small part: keep away from children and work on a clean surface to avoid loss

Fix weak airflow, loud noises, or no ventilation in your range hood. This blower fan assembly restores proper exhaust and quieter operation.