Parts for Maytag JXW9036WP0: 01 - Hood Parts

This hood damper replaces the vent flap that opens to let exhaust air escape and closes to block outside air and backdrafts when the hood is off. It restores proper airflow control for range/hood ventilation. What it does:

• Opens with fan operation to allow cooking exhaust to vent outside
• Closes when the hood is off to reduce drafts and prevent outside air entry
• Stops wind or odors from coming back into the kitchen when working correctly
• Common symptom: fan runs but little or no exhaust, or persistent backdraft/odors

• Disconnect power to the hood or range hood assembly before beginning work
• Access typically requires removing the hood/vent housing or grille to reach the damper
• Inspect surrounding duct and mounting for damage; replace damper if warped or stuck

Bulb only - Socket must be ordered separately

This socket is an electrical wire terminal that provides a secure connection between wiring and a compatible appliance component, helping restore reliable power transfer and prevent loose or intermittent connections. What it does:

• Accepts and holds a mating terminal to complete an electrical circuit
• Restores a secure wire-to-component connection when the original socket is damaged or worn
• Helps stop intermittent power, sparking, or heating at a loose connection
• Used where a durable, removable terminal interface is required

• One socket terminal (single piece)

• Turn off and disconnect power to the appliance before servicing
• Inspect mating terminals and wiring; replace any damaged wires or connectors
• Push the mating terminal fully into the socket until it locks; ensure proper orientation

This grease channel is the molded drip tray that collects and routes cooking grease away from the vent/hood area to help keep the appliance interior cleaner and reduce smoke buildup. Durable replacement for worn or cracked channels. What it does:

• Captures and channels drips and grease from the cooking surface or vent inlet
• Prevents grease from pooling inside the vent or cabinet area
• Helps reduce smoke, odors and potential staining from accumulated grease
• Restores proper drainage when the original channel is cracked, warped or missing

• One grease channel/drip tray as pictured

• Follow the appliance service manual for access and removal steps; appliance disassembly may be required
• Use appropriate hand tools; avoid sharp edges on metal housings and wear gloves
• Disconnect power (and gas if applicable) before servicing to avoid injury
• Only reinstall if the channel seats properly and does not interfere with other parts

This replacement refrigerator water filter helps improve water and ice taste by trapping common impurities. It restores cleaner-tasting water for drinking and cooking when your existing filter is old or clogged. What it does:

• Filters water to help reduce common contaminants that affect taste and clarity
• Helps improve the taste and odor of dispensed water and ice
• Addresses symptoms like unusual water taste, cloudy ice, or reduced water flow from the dispenser
• Restores proper filtering performance when the old filter is past its service life

• Turn off water supply to the refrigerator before removing the old filter.
• Follow your refrigerator's filter removal/installation steps; typically push/rotate or pull to remove and insert until secure.
• Flush several quarts of water through the dispenser after installation to clear air and initial carbon fines.
• Dispose of the used filter according to local regulations.

This is a replacement refrigerator water filter cartridge that helps restore clearer, better-tasting water and ice. Use when your dispenser or ice maker produces cloudy water, unpleasant taste or odors, or reduced water quality. What it does:

• Traps common particles and sediment that cause cloudy water
• Reduces chlorine taste and odor to improve water and ice flavor
• Helps maintain normal dispenser and icemaker performance related to water quality
• Provides a direct-replacement fit when the OEM filter is removed and replaced

• Turn off the water supply and dispense water to relieve pressure before removing the old filter.
• Remove the old filter per your refrigerator's OEM instructions and install the new cartridge until it seats securely.
• Run several gallons of water through the dispenser after installing to flush the system and clear air.
• Follow the refrigerator OEM for recommended replacement interval and any filter reset procedures.

Replace a cracked or missing knob with this control knob to restore smooth, precise adjustment of a range or cooktop surface burner. It provides a secure grip so you can easily select the desired heat setting.

• Attaches to the burner valve/switch stem to control flame or heat level
• Replaces knobs that are cracked, stripped, loose, hard to turn, or missing
• Helps maintain proper alignment with console markings from Off through High
• Restores a clean look and confident feel when turning the control

• Disconnect power and shut off gas supply before servicing
• Pull the old knob straight off the stem; avoid twisting the valve shaft
• Align the new knob with the stem and press firmly until fully seated
• Verify smooth operation and correct pointer alignment with the panel

The Capacitor is an OEM part for Whirlpool range hoods. This capacitor functions to optimize blower motor performance. It works in tandem with the motor to efficiently expel cooking vapors and gases from the kitchen.

Causes relate to standard wear over extended use of the vent hood. Electrical issues can cause premature capacitor failure.  

Symptoms of a bad capacitor include:

• Reduced air circulation and weaker ventilation
• Abnormal humming or grinding noises from the motor
• Failure of the blower to turn on as desired

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.