Hotpoint Range / Cooktop / Oven Terminal Block, Receptacle Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 330031
Burner not heating? This receptacle kit restores electrical connection to cooktop elements. Most DIYers complete this repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014
Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday.
This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire...
Read more
More
$15.95
- Compare At:
-
$18.82
- You Save:
-
$2.87
Genuine Ge part
By: Ge
Part Number: WB17T10006
Burner not heating or terminal block burned? This electric range terminal block kit restores power to surface elements. Easy 10-15 minute DIY repair.
This part fixes the following symptoms
-
Element will not heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
THE TERMINAL BLOCK WAS BURN AND IT DOES NOT TURN HOT. Kenny W. • San Jose , CA • April 06, 2014
I ORDER THE TERMINAL BLOCK KIT, AND FOLLOW THE VIDEO HOW TO REPAIRE. IT IS VERY EASY.IT TOOK ME 10 MIN.
Read more
More
$19.38
- Compare At:
-
$25.40
- You Save:
-
$6.02
Genuine Ge part
By: Ge
Part Number: WB2X8228
Burner not heating? Replace the element receptacle and wire kit. Fixes burned or broken receptacles causing inoperative burners. DIY-friendly repair.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
One of the burners on my 1990s (?) Hotpoint electric stove was unreliable heating up around 2/3 of the time Earl R. • Presque Isle , ME • August 11, 2022
I ordered the recommended Infinite Heat Switch Kit and Element Receptacle and Wire Kit and installed them. The latter was a breeze, appearing to be exactly the same as the original, except for the wire color. The switch, though, was another story. It is a RobertShaw "replacement" part, designed, it seems, for use in the greatest number of original units as possible. The most obvious difference between this switch and the original (besides its comparatively small size) is the long, segmented...
Read more
More
$29.95
- Compare At:
-
$35.34
- You Save:
-
$5.39
Genuine Ge part
By: Ge
Part Number: WB17X5113
Burner not heating or working intermittently? This surface element receptacle connects your heating element to power. DIY-friendly repair in under 1 hour.
Do-It-Yourself Stories from Customers like You
Burner on stove was intermittent and had my wife steamed and hot under the collar for a year i had already replaced all the switches on the stove using appliance parts pros Chris D. • Granby , CT • June 12, 2014
Watched the video when the part came, and 5 minutes later, our 25 year old stove is once again working like a champ.
Read more
More
$32.54
- Compare At:
-
$40.26
- You Save:
-
$7.72
Genuine Ge part
By: Ge
Part Number: WB17T10011
Range won't heat or burners stopped working? A burnt or melted terminal block may be the cause. This wiring connection hub routes power to elements. DIY repair in 10-20 minutes.
Do-It-Yourself Stories from Customers like You
Small fire & smoke terminal block must have gotten to hot & melted causing short to back of stove Jack M. • Zebulon , NC • May 31, 2015
Removed damage terminal block ordered new block on line. when I received new block installed it stove works fine easy to replace. If I had not been home at the time when this happen it may had cause a big house fire.
Read more
More
$59.34
- Compare At:
-
$70.02
- You Save:
-
$10.68
Genuine Ge part
By: Ge
Part Number: WB17X210
Burner not heating or making poor contact? A damaged terminal block disrupts power to heating elements. DIY-friendly repair, takes about 10 minutes.
Do-It-Yourself Stories from Customers like You
The terminal block on my stove burned out Michael Y. • Fredericksburg , VA • November 28, 2014
Ordered a new terminal block kit from Appliance Parts Pros. Shipping was lightening fast. Slapped the new part on my stove and its never worked better. Thanksgiving was saved! I'd replace the rest of my stove's terminal blocks if they weren't $50 a piece...sheesh!
Read more
More
$72.74
- Compare At:
-
$87.29
- You Save:
-
$14.55
Genuine Ge part
By: Ge
Part Number: WB17X5095
The Terminal Block is an OEM part for GE electric ranges. It serves as a critical junction point where the range's wiring connects to the heating elements, ensuring proper electrical flow and operation of the oven and cooktop. This component is essential for the safe and efficient functioning of your appliance.
Causes of a bad terminal block can include overheating due to electrical surges, corrosion from prolonged exposure to heat and moisture, or physical damage from improper installation or handling.
Symptoms of a bad terminal block include:
- The oven or burners not heating properly
- Visible signs of burn marks or corrosion on the block
- Electrical arcing or sparking
- Intermittent or no power to the heating elements
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad wire on terminal block of electric range caused the stove to quit working 3days before thanksgiving Stephen Y. • San Antonio , TX • November 25, 2016
Replaced the power cord, bur terminal block fell apart. Ordered replacement part, and overnight shipping. Received the next day and completed repairs. Cheered up my wife, for sure.
Read more
More
$50.04
- Compare At:
-
$69.23
- You Save:
-
$19.19