Hotpoint Range / Cooktop / Oven Switch
Genuine Ge part
By: Ge
Part Number: WB24T10025
Burner stuck on high or won't heat? This 8-inch infinite switch controls heat output on electric ranges. Simple 20-30 minute DIY replacement.
Do-It-Yourself Stories from Customers like You
The heating element where boiling hot at any seting of the knob Christopher H. • Lawrence , KS • August 17, 2014
I replace the Infinite Switch and that seems to be the trick for keeping the temperture under control.
Read more
More
$39.95
- Compare At:
-
$47.14
- You Save:
-
$7.19
Genuine Ge part
By: Ge
Part Number: WB24T10029
Burner won't adjust temperature or stuck on high? This surface burner control switch restores heat control. Quick 10-minute fix with basic tools.
Do-It-Yourself Stories from Customers like You
Large dual burner Frederick E. • Athens , AL • September 19, 2014
Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails.
My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because...
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Ge part
By: Ge
Part Number: WB24X829
The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.
Symptoms of a failing Microwave Door Switch include:
- The microwave not starting or heating
- Running when the door is opened
- Unusual noises when the door is closed
Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Doesn't shut off
-
No heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Ge microwave ran when turned off if door was shut Jason A. • Cary , NC • April 02, 2017
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out...
Read more
More
$39.95
- Compare At:
-
$47.14
- You Save:
-
$7.19
Genuine Ge part
By: Ge
Part Number: WB24X10047
The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.
Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running.
Symptoms of a bad Door Interlock Switch include:
- Microwave does not start
- Microwave stops unexpectedly
- The microwave operates with the door open
- Microwave turns on but does not heat food
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
When a power up of any kind was selected timer or clock ran down but turntable or cook mode never started when door was moved a little it would start to work then stop research suggested door switch James D. • Smyrna , TN • December 28, 2014
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are...
Read more
More
$42.95
- Compare At:
-
$51.54
- You Save:
-
$8.59
Genuine Ge part
By: Ge
Part Number: WD21X10261
The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.
Symptoms of a faulty interlock switch include:
- Dryer failing to start or running with the door open
- Timer display not illuminated when start button is pressed
- Inability to open the dryer door during operation
- Dryer suddenly stopping mid-cycle before fully drying clothes
Causes relate to the internal component contacting the door frame over 50,000 open/close cycles potentially exposing wiring to wear. Regular cleaning the external switch area prevents dust or lint buildup skewing performance.
This genuine GE switch is compatible with Hotpoint and RCA dryers as well.
Note: Can be used as a dishwasher door switch on specific models. Check your model number for the most accurate results.
Do-It-Yourself Stories from Customers like You
Melted door switch. Christopher K. • Greeneville , TN • February 03, 2024
The full story:
Dishwasher stopped running mid-cycle. When I first began troubleshooting I tried manually advancing the timer knob, and the machine would run. That led me to believe that the actual timer assembly was bad, so I replaced it. The dishwasher ran fine for a day, and then the same problem came back. This time, however, I also had to push in on the door to get it to run. I looked around online, and someone suggested that the door latch wasn't closing tightly enough. I adjusted the...
Read more
More
$28.75
- Compare At:
-
$34.21
- You Save:
-
$5.46
Genuine Ge part
By: Ge
Part Number: WB24X830
This is a monitor or interlock switch that detects whether the microwave door is properly closed before allowing the unit to operate. It is a safety device that shuts off microwave power if the door is open or if other door switches malfunction. Replace this switch if the microwave does not start, runs with the door open, or blows a fuse when the door is closed.
Do-It-Yourself Stories from Customers like You
Ge microwave ran when turned off if door was shut Jason A. • Cary , NC • April 02, 2017
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out...
Read more
More
$38.95
- Compare At:
-
$46.74
- You Save:
-
$7.79
Genuine Ge part
By: Ge
Part Number: WB21X36771
The Infinite Heat Switch Kit is an OEM part for GE ranges and cooktops. This kit is essential for controlling the temperature of the burners on your range or cooktop, allowing you to adjust the heat level from low to high.
Causes of damage to the infinite heat switch can include normal wear and tear from frequent use, electrical issues such as short circuits or power surges, and physical damage from cleaning or impact.
Symptoms of a bad Infinite Heat Switch include:
- Burners not heating to the desired temperature, either staying too hot or not getting hot enough.
- The burner not turning on at all, indicating a possible failure in the switch's electrical contacts or circuit.
- Inconsistent cooking temperatures, where the burner cycles on and off too frequently or not often enough, affecting cooking performance.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Had previously replaced one burner control because the burner indicator light stayed on William A. • Dodge Center , MN • July 13, 2015
I replaced all 3 remaining burner controls because they were all original (mid 1970s GE electric range w/coil burners), and one of the controls occasionally made arcing sounds when cycling the burner on and off. If a control is making odd noises - more than just a quiet metallic clicking
as it cycles - it should be replaced.
I'm assuming you have experience with the tools needed and can do simple mechanical assembly or disassembly, but have not previously worked with electrical equipment of...
Read more
More
$49.79
- Compare At:
-
$59.75
- You Save:
-
$9.96
Genuine Ge part
By: Ge
Part Number: WB24X25397
Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.
Do-It-Yourself Stories from Customers like You
When a power up of any kind was selected timer or clock ran down but turntable or cook mode never started when door was moved a little it would start to work then stop research suggested door switch James D. • Smyrna , TN • December 28, 2014
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are...
Read more
More
$31.95
- Compare At:
-
$37.70
- You Save:
-
$5.75
Genuine Ge part
By: Ge
Part Number: WB24T10153
Fixes burner stuck on, no low heat, or burner not heating. Controls temperature levels on electric range surface burners. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Switch shaft that knob attaches to was broken Brian T. • Milpitas , CA • September 02, 2016
Switches needed to be replaced. Make note of where each screw comes from. They were not all the same. To remove the front panel and get to the switches, you have to partially remove the cook top. Removed 5 screws from the back to release the cooktop. Slid the cooktop back far enough to expose screws holding on the front panel. Removed 4 screws from the top and 6-8 from the bottom (opened the oven door to get to the bottom screws). Removed screws from the front panel holding the switch in...
Read more
More
$92.95
- Compare At:
-
$111.54
- You Save:
-
$18.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W10900107
Burner won't heat or cycles on and off? This infinite switch controls temperature levels on electric range surface elements. DIY repair in 10 minutes.
Do-It-Yourself Stories from Customers like You
The control knob broke off on my electric range top Bill M. • San Martin , CA • June 26, 2015
I ordered the correct part from AppliancePartsPros.com. When I received it, I opened the package and identified the parts I would need for my application. I cleaned up around my work space, then turned the power off to the appliance. I removed all the burners to get to the mounting screws for the range top. I then lifted the range top and supported it so I could see what I was working on . I first inspected all the wiring for breaks, or fraying. Then I moved on to the switch. Two screws...
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Ge part
By: Ge
Part Number: WB24T10027
Burner won't shut off or stays on high? The infinite control switch regulates surface burner heat. Easy DIY repair, typically 10-15 minutes to replace.
Do-It-Yourself Stories from Customers like You
Burners were overheating and could not be controlled finally one burner burned out entirely Ernest K. • Sanford , NC • June 06, 2015
Replaced the large burner control switches for the ones giving trouble. Since the other two switches
had seen as much use as the faulty ones, replaced them too. After putting in new switches, found that one large burner had burned out so replaced it also. Range now cooks as good as new
Read more
More
$103.76
- Compare At:
-
$123.47
- You Save:
-
$19.71
Genuine Ge part
By: Ge
Part Number: WB24T10022
Burner not heating or stuck on? This surface element switch controls power to your cooktop burners. Common repair when heat won't adjust properly.
Do-It-Yourself Stories from Customers like You
Burner didn't work Larry W. • Aiea , HI • March 23, 2014
Replaced the switch infin by watching the video
Read more
More
$106.95
- Compare At:
-
$126.20
- You Save:
-
$19.25
Genuine Ge part
By: Ge
Part Number: WB24T10058
Burner stays on high or won't turn off completely? This infinite control switch regulates surface burner heat. Simple 10-minute DIY fix with video guide.
Do-It-Yourself Stories from Customers like You
Bad burner switch James C. • Augusta , NJ • January 04, 2015
I first checked a repair video and found the procedure was a 10 minute job. I then went to the website, put in my stove model number and searched for the switch. While I was looking I was offered a chat session with one of their experts. I am glad that I accepted. The switch I was looking at was not the right switch for the job. My expert verified my model number and the switch that need to be replaced. After a couple of minutes, she came back with the right part and placed the order for...
Read more
More
$97.35
- Compare At:
-
$116.82
- You Save:
-
$19.47
Genuine Ge part
By: Ge
Part Number: WB23K5027
Burner won't stay at set temperature or jumps to high? The infinite switch controls power to heating elements. Easy DIY repair, takes under 30 minutes.
Do-It-Yourself Stories from Customers like You
Had no control over burner temp Thomas M. • Country Club , MO • January 21, 2017
Replaced control Element.
This took less then 30 min and I am no pro(first time to do this repair).
Read more
More
$108.95
- Compare At:
-
$128.56
- You Save:
-
$19.61
Genuine Ge part
By: Ge
Part Number: WB24X29364
Burner stuck on high or can't regulate heat? This infinite switch controls cooktop element temperature. DIY-friendly repair in under an hour.
Do-It-Yourself Stories from Customers like You
Element temperature would only work on high and there was no adjustment to the heat Joann S. • Lennox , SD • October 26, 2015
Ordered the element control for my dual front right burner and a infinite heat switch for my left front large single burner. Removed cooktop and followed the instructions video given with the parts online. Process was simple and everything on my cooktop is working like it is brand new. The only problem I have is with the online chat, save time by calling in and talking to someone as the people I talked to online (4 of them) are in such a hurry to get to the next call they gave conflicting part...
Read more
More
$81.66
- Compare At:
-
$97.99
- You Save:
-
$16.33
Genuine Ge part
By: Ge
Part Number: WB24K10017
Burner won't spark or ignite? This ignition switch controls the spark module for gas range surface burners. Mounts on the valve assembly behind knobs.
Do-It-Yourself Stories from Customers like You
1 burner was not igniting the sparker on a low end 20 year old GE stove. Benjamin F. • Villa Park , IL • January 09, 2022
Rather than replacing the whole ignition switch harness, I cut out the broken switch and replaced it with Burner Ignition Switch WB24K10017 / AP2632529. Wire stripper, small wire nuts, and electrical tape were also used.
At first, the new switch was constantly on when the knob was in the off position. The gas valve shaft has a "U" shape. When the U is right side up, the gas is off and so should the igniter. The gas valve shaft position couldn't be changed, so instead, I re-mounted the...
Read more
More
$51.95
- Compare At:
-
$61.82
- You Save:
-
$9.87