Huskee / Husky Control Cable

The snowblower auger cable initiates operation of the snowblower’s auger similar to the cable on the handle of a push mower. To start the snowblower, the control handle must be squeezed. This engages the snowblower auger cable to allow the auger to begin turning. When the snowblower auger cable is broken, the snowblower cannot work because the auger will not turn. The length of this snowblower auger cable is 47.48 inches. It is made from high-quality rubber insulation of a metal wire. A pair of pliers and a wrench are needed to complete the repair. If the snowblower still does not work after replacing the snowblower auger cable, check the shear pin as these are prone to breaking and will also prevent the auger from turning. This genuine OEM snowblower auger cable is compatible with snowblowers manufactured by Craftsman, Cub Cadet, Husky, MTD, Troy-Bilt, Yard Machines, and Yard-Man. This part is sold individually. You will need to order any hardware, housing, and the trigger separately if these items also need repair or replacement.

This part is a speed select cable. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or detached speed select cable on certain snowblower models. The speed select cable works by fastening the ground drive system to the speed control level. This enables the equipment operator to properly control speed and traction while using a snowblower. Over time, speed select cables can experience wear and tear which can cause them to break or become detached, requiring replacement. Without a functioning speed select cable, the snow blower will not be able to be properly controlled. For accurate information on how and where to install this replacement speed select cable, specific manufacturer diagrams should be referenced. Proper safety measures should always be followed when working on any type of equipment.As an authentic replacement part, this speed select cable can be used on multiple different models of Craftsman, MTD, Yard-Man, and Huskee snow blowers. Please note that this speed select cable is a genuine part made of high-quality materials and is sold individually.

This genuine MTD speed selector cable attaches the speed control lever to the snowblower's ground drive system to regulate and maintain the speed of the snowblower.Though speed selector cables are highly durable, they can be subject to damage as a result of exposure to inclement weather, impact upon collision, and general decline. Signs of a damaged speed selector cable can include malfunctioning regulation of speed, an overheating engine, or black smoke rising from the engine. If any of these symptoms occur, the speed selector cable should be checked and replaced immediately, as the snowblower cannot function properly without it. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This speed selector cable is compatible with the following brands: MTD, Troy-Bilt, Cub Cadet, Yard Machines, and Craftsman. Part sold individually.

The drive clutch cable is a clutch or engagement cable that tightens the drive belt or lifts the spinning friction disc contained within the drive housing. It will cause contact between the driveshaft and turn the wheels. If the wheels refuse to turn, it may be due to a cable that is damaged, loose, or snapped. If tightening the tension fails to yield results, this OEM replacement cable is needed. Replacing a drive clutch cable is fairly easy. Remove the original and use pliers and a socket set to install and tighten the new one. "This is a drive clutch cable designed for use in snowblowers produced by MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and others. It ships individually and is made of rubber, wire, and metal.

This is a drive cable that is used in many models of snowblowers from top manufacturers. It is composed of a metal cable that is inserted into a flexible plastic housing. The purpose of the drive cable is to connect the drive control located in the snowblower engine handle. It makes sure that the snowblower starts and stops when the controls are used. If the drive cable is broken or becomes damaged, the snowblower will not work correctly even if the control handle is released.If a snowblower isn't starting or stopping when expected, the drive cable is likely the source of the problem. The part needs to be replaced before the snowblower can be used again. Disconnect the spark plug wire before releasing the handle cables and removing the drive cover. Replace the drive cable and reassemble the other parts.This is an authentic OEM replacement drive cable that is sourced directly from the manufacturer. It is sold as an individual component. The drive cable is designed to be compatible with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This genuine OEM Part is a choke temperature control rod for lawnmowers. The choke temperature control is the metal piece that regulates the choke temperature allowing for it to function properly within a lawnmower. If the choke function is no longer working efficiently, it might be time to replace the choke temperature control. Luckily, replacing this part is a simple repair.Before beginning, make sure the engine is cool to avoid getting burned. Locate the old choke temperature control rod and remove the screws to the mounting assembly that hold the rod in place. Once removed, lift the old choke temperature control out and away from the mower and set it to the side. Replace with the new control rod and secure the mounting screws. Start up the mower to see if the choke function is working properly. If it does, the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.

This is a throttle lever that is used in many types of lawn and garden equipment. It is one of the components in the throttle assembly. The purpose of the throttle lever is to stop the engine whenever the user moves the lever into the full choke position. Sometimes, wear and tear or damage can cause issues with the throttle lever. If the lever is broken, it may not be possible to move the component, and it will need to be replaced. Excessive dirt and debris can also cause issues with the throttle lever. If the throttle lever needs to be replaced, pliers and a screwdriver will be needed for the process. The first step is to remove the throttle assembly and the cable attachment on the clutch. Take the cable out of the throttle lever before removing the lever itself. The new component can be installed in the same position before reassembling the tool.This throttle lever is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The lever is made for use with edgers and lawnmowers manufactured by Bolens, Cub Cadet, Huskee, MTD, and Yard Machines.

This OEM part is a depth cable for lawnmowers. Also known as a stop cable, the depth cable is the cord that stops the blades from running when the mower is in an idle position. If the lever has been released and the blades are still rotating, this might mean that the depth cable is no longer functioning and needs to be replaced. Luckily replacing the depth cable is a relatively simple fix. To replace the depth cable, begin by removing the bracket that holds the cable to the handle by using a screwdriver to pry it off. On the lower part of the handle, there is a clip that secures the cable. Remove the clip and disconnect the end of the cable near the kill handle. Locate the brackets connected to the engine. Remove the plastic tabs securing the cable housing with a pair of needle-nose pliers and pull the housing away from the bracket. Set the old cable aside and reinstall the new cable in reverse order. This genuine replacement part is sold individually and is compatible with MTD brand lawnmowers.

This part is a throttle control box assembly. The throttle controls the amount of air or fuel that enters the engine and also controls the speed of the engine. This assembly includes a throttle control knob that allows the user to control the throttle and the speed of the outdoor power equipment machine.A new throttle control box may be needed if any part of the assembly is cracked, broken, or damaged in any way. It's important to remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD throttle control box assembly and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific throttle control box assembly is compatible with edgers and lawn tractors that are manufactured by MTD, Yard Man, Yard Machines, and Cub Cadet.