Huskee / Husky Tiller Starter

The recoil starter assembly starts the engine by using the grip to pull the rope, which activates the starter pulley and spring, causing the flywheel to rotate and start the engine. Over time, the starter spring can become stretched, causing the rope to seize up or fail to retract. The housing itself could also become damaged. It’s often easiest to replace the entire recoil starter assembly with this OEM model rather than individual components. The installation can be done quickly with a screwdriver and wrench by removing the three bolts that hold the assembly in place. This genuine OEM part is manufactured by MTD. It fits lawn mowers, tillers, log splitters, and other small engines made by MTD, as well as models from Bolens, Yard-Man, Yard Machines, Cub Cadet, Troy-Bilt, and Husky. This part includes the starter housing that protects the flywheel and other internal components, along with a starter pulley, spring, pull rope, and grip. The hardware required for this assembly is not included and must be purchased separately.

This recoil starter assembly is a genuine MTD part, sold individually. This recoil starter assembly can be used as a replacement part for a tiller. The recoil starter assembly comes with all of the necessary components and fasteners required to replace a recoil starter. The recoil starter is a crucial part of the pull-start mechanism of a tiller, by which the engine of the tiller is powered on when the operator engages the pull-start. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This recoil starter assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Man, Yard Machines, and Huskee.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.

This is a starter recoil assembly. It is used when starting small lawn equipment and other machines. It engages the flywheel. With time and use, any or all of the recoil can wear out or become damaged, including the spring, housing, rope, or pulley. If something is damaged or worn out, the entire starter recoil assembly must be replaced. Signs that the part requires a repair include an engine that won't start or has difficulty engaging.Replacing a starter recoil assembly is easy and can be done in about 15 minutes. A nut driver and screwdriver are required for the repair. Wear gloves. Make sure the equipment is completely cooled before beginning the recoil assembly replacement. After putting tension on the spring and pulley, hold the housing securely to prevent it from releasing.The starter recoil assembly is a genuine OEM-authorized replacement part. It is sold individually. The starter recoil assembly is compatible with MTD, Cub Cadet, Yard Machines, Husky, Yard-Man, and Troy-Bilt brands. It is a complete part that includes the housing, rope, pulley, and recoil spring. It works with small engines, lawnmowers, log splitters, trimmers, and other similar equipment.

A starter handle is a piece that works in combination with several other components to start the engine in numerous machines, including lawn equipment. It works when the user pulls the starter handle grip, attached by a mechanism to the crankshaft. It turns to start the engine. If the starter handle breaks, it will have to be replaced in order to start the machine. Starter handles can become damaged from normal use, misuse, or after an accident.Replacing the starter handle is a simple project. After locating the mechanism it attaches to, typically a sturdy rope or cord, the starter handle should be tied securely to the end of the string. Wear gloves to protect the hands during the process. Test the strength of the attachment before trying to start the machine.This starter handle is a genuine OEM replacement part. It is sold as an individual piece. This starter handle is made of durable, high-quality material. It can be used in devices from MTD, Husky, Troy-Bilt, Yard Machines, and Yard-Man. It is compatible with various lawnmowers, log splitters, trimmers, and other devices with pull start engines.

The recoil starter assembly is comprised of the housing, the recoil spring, the starter pulley, the starter rope, and the plastic starter grip. It creates the motion that spins the flywheel to engage the engine. The grip is pulled, which extends the rope and activates the starter spring, which then engages the starter pulley and the flywheel, respectively. Over time, various components of the recoil starter can become damaged or worn with regular use. This is often going to require a replacement and in most cases, it will be easier to replace the entire assembly than a single component. This genuine OEM recoil starter is manufactured by MTD and is made to exact standards. It can be used with more than 150 MTD engines on lawn equipment, including from brands like Craftsman, Bolens, Yard-Man, Yard Machines, Remington, Husky, RYOBI, and Cub Cadet. This replacement assembly includes a limited parts warranty and includes all components: the plastic housing, starter pulley, pull rope, starter grip, and starter spring. The hardware for securing this housing is sold separately.