Husqvarna Chainsaw Parts

This recoil starter screw is an authentic OEM replacement part used in various lawn mowers and other lawn and garden machines that use a pull start system. The recoil screw is used in various places on the recoil system to connect parts and hold them in place. Over time, vibrations from the equipment may cause the screw to become loose and fall out. If this happens, the recoil starter may fail, and the equipment will not operate. The recoil screw should be replaced.Recoil starters operate when the starter rope is pulled. This unwinds the recoil spring, which causes the engine to fire and run. If the recoil feels loose or wobbly when the pull rope is used, the screws may be loose. This is a good indicator that the system should be inspected for loose or missing screws. Extra recoil screws should be kept in the repair toolbox to have on hand during inspections and routine maintenance.This recoil starter screw is a high-quality gold metal screw that is sold individually. It is designed for use in lawn and garden equipment manufactured by MTD, Craftsman, and various others.

This replacement part is a brake assembly. This is a genuine replacement part made by Husqvarna. This brake assembly is responsible for allowing the user to brake properly in many different kinds of lawn mowers. This ensures safety overall during the user of the machine. A new brake assembly might be needed if the current one is not working as properly as before. If the brakes are making unusual noises, it might be time to replace the brake assembly. Be sure to refer to the user manual for more specific information on replacing this part before attempting to get started. Work gloves are also recommended during this repair. This brake assembly is a genuine OEM replacement part to ensure proper fit. This part is also sold individually and is sourced directly from the manufacturer.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a chainsaw. The purpose of the screw in a chainsaw is to serve as a small fastening component within the internal mechanisms of the appliance. The screw in a chainsaw might need to be replaced if it is lost, misplaced, or stripped away over time from general wear and tear. If the screw is lost or misplaced, which is easy to do as it is a small part that can disappear without affecting the functionality of the appliance, the screw should be replaced by this genuine OEM replacement part. The same should occur if the screw has been damaged.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This is a piston ring replacement that is used for several types of outdoor tools and equipment. The piston ring is used to create a seal between the piston and the cylinder. The seal formed by the piston ring separates the crankcase and the combustion chamber to ensure there is proper compression in the engine. The piston ring can start to wear down or even break after a substantial amount of use. When there is any type of damage to the ring, owners should have it replaced immediately. Problematic piston rings will mean the seal is broken, which will then result in a loss of compression and performance problems with the engine. This genuine OEM piston ring is compatible with more than 150 different models. The ring is made with a 36 chromium-ceramic coating. It is sold individually and is typically used for chainsaws. It could also be used for some pole pruners and trimmers. Compatible brands include Jonsered, Husqvarna, Poulan, Poulan Pro, and Craftsman.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.

This replacement part is a screw. This part is small but important to many different types of machinery and appliances. Screws ensure that other parts in the machine are held together properly and are secure.Screws can become stripped or rusted over time and may break, fall out of place, or become stuck. If this is the case, it is recommended that it be replaced as soon as possible.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.