Husqvarna Chainsaw Parts

This is a plunger and gear assembly that provides lubricating oil to chainsaws. This part is compatible with over 125 chainsaws. Proper lubrication of the cutting chain is necessary for chainsaws as the rotation of the chain through the wood results in extreme heat and diminished ability to smoothly cut. Lubricating oil cools the chain and smooths the travel of the chain around the blade. Through continual use, the plunger and gear assembly will wear and cease to function. A sure sign of this occurs when the oil reservoir is full, but the chain is heating up and chewing rather than cutting wood. To replace the plunger and gear assembly, first, remove the chain and detach the bar. Then the clutch mechanism can be unscrewed, revealing the gear and plunger unit. Because contaminants can accrue in the reservoir and in the old assembly, it's best to discard any remaining oil safely and fill the reservoir with new oil. When replacing the gear and plunger assembly made by Jonsered, Husqvarna, and Poulan, it is best to use a genuine OEM replacement part such as this one, which is manufactured according to the specifications of the factory original.

This part is a replacement isolation limiter screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a broken, stripped or defective isolation limiter screw in chainsaws.This isolation limiter screw helps to reduce movement and secure components of the chainsaw. It is a critical component that may become stripped, corroded, misplaced, or otherwise defective over time, requiring replacement. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this isolation limiter screw, the appropriate owner's manual and equipment diagrams should be referred to. This isolation limiter screw is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with chainsaw models that have been manufactured by Husqvarna, Poulan, and other brands.

This is a throttle lockout that is utilized in many chainsaws made by Husqvarna. It is a safety mechanism to prevent damage or injury while the chainsaw is in use. Triggering the use of the equipment requires the throttle lockout to be depressed. This prevents the chainsaw from activating by accident. The part is made of durable plastic but can experience damage or wear and tear through regular use. If the part is lost, broken, or damaged, the chainsaw will not operate. If this occurs, the throttle lockout will need to be replaced.A screwdriver is needed to replace the throttle lockout. A pair of work gloves will also be useful. Turn off the chainsaw with the damaged part and place it on a stable surface before disconnecting the spark plug wire. This will prevent the chainsaw from coming on while making the replacement. Remove the handle insert to access and take out the damaged throttle lockout. The new component can be installed before replacing the handle insert.The throttle lockout is sold individually. It is designed to be compatible with several chainsaws manufactured by Husqvarna. This is an authentic OEM replacement component that is sourced directly from the manufacturer.

This starter pulley is a genuine Husqvarna part, sold individually. This starter pulley can be used as a replacement part in a lawn mower. This component is a part of the starter assembly, which is used to power the appliance on.If the starter pulley is dented, cracked, punctured, pierced, warped, or eroded within the typical lifespan of the lawn mower, the starter pulley should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe use of the appliance cannot be guaranteed without a starter pulley in place.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This starter pulley is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement retainer ring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or misplaced retainer ring on lawn tractors. Retainer rings help to hold components together properly. This ensures that there isn't unnecessary movement, breakage, or friction. This part can become worn or corroded over time and thus will need to be replaced. Wear work gloves to protect the hands when installing this retainer ring. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this retainer ring, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This retainer ring can be used with a variety of different lawn tractor models manufactured by Husqvarna and Poulan.

This is a replacement engine guard that will work with a range of mowers. As the name suggests, the engine guard is used to help keep the engine of the mower safe. It will help to keep debris and other materials from getting into the engine. If the engine guard is broken or cracked, it could lead to problems with the engine from foreign debris. Replace this part as soon as possible.The engine guard is made from quality material and is designed to be durable. However, because it is on the front of the mower, it can suffer a substantial amount of wear and tear. There is also the possibility of damaging the guard while operating the machine. Owners should be able to replace the guard with no issue.The engine guard will work as a replacement for select models of zero-turn mowers from Husqvarna. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This replacement part is a steering lever and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Steering levers are important in many different types of ridden lawn mowers and assist the user in ensuring the proper movements during use.A new steering lever might be needed if the current one is not working properly. This can be due to normal wear and tear over time. It is common that the steering lever can become stripped over time. If the user is having trouble steering smoothly or notices that the steering of the machine is rigid, it can be due to a worn-down steering shaft. Be sure to wear work gloves when replacing this part. It is also recommended that the engine be powered off. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. This steering lever is sold individually and is sourced directly from the manufacturer.

This 1/4-20 hex nut has a great variety of uses on lawn and landscaping equipment. As a lock nut, it can be tightened and retains its grip, even without the use of a washer. This particular piece of hardware appears in many connective points on push mowers, zero-turn mowers, riding mowers, tillers, lawn tractor implements, and other types of equipment manufactured by Husqvarna, Poulan, Jonsered, and Weed Eater. For instance, with MTD mulching mowers, these hex nuts are used to secure the mower housing to the manifold of the mower. More than just with gasoline-powered lawn tools, these versatile nuts are also found on handheld tools like impact wrenches and tools driven by compressed air. Hex nuts bind tightly with their locking grip and seldom come off. The more likely scenario, especially since so many are used in manufacturing and by power tools, is that these nuts will become lost in the course of maintaining, cleaning, and repairing mowers and other equipment. For this reason, it's always important for the user to purchase more than the anticipated number needed. Make sure also to purchase hex nuts like these that are OEM certified and guaranteed.