Need Help?
Call or text
This is an authentic OEM replacement ignition module built specifically for Husqvarna lawn appliances. An ignition module, also known as an armature-magneto, is an essential part of a combustion engine's ignition. The ignition module creates pulses of high voltage electricity that the spark plug uses to generate a charge and start the ignition. Without a functional ignition module, the spark plugs and ignition will not engage. The most common reason for an ignition module to break is if the spark plugs have gone bad or are missing from the ignition. The charge generated by an ignition module is quite high, so if the spark plugs are not in place to receive the charge, the high voltage can fry and melt the module. If the spark plugs are not receiving a spark but can carry a charge, the odds are that the ignition module has been fried and will need to be replaced. To make this repair, use a wrench set and screwdriver. Although this high-quality replacement part is designed specifically for Husqvarna appliances, it may also work with some Jonsered appliances, too. It comes sourced from the original manufacturer and does not include any additional hardware.
Usually ships within 4 - 14 days
This fuel line kit is a part used in gasoline-powered edgers and trimmers. It delivers fuel from the gasoline tank to the carburetor where it is mixed with air that has come through the air filter. The mix flows into the combustion chamber where it is ignited to turn the driveshaft of the tool. As an added feature, this fuel line kit also has another line to feed excess fuel back into the gas tank. Extra, unneeded fuel sometimes flows into the carburetor when the engine is cold and users are trying to prime the engine. Although durable and intended to last, this fuel line is subject to weathering over the course of several years, especially when subjected to temperature extremes. A broken or fractured fuel line will leak gasoline, resulting in an extremely dangerous situation. Leaking fuel lines must be replaced immediately. This component is easily located, situated between the fuel tank and the carburetor. It is easily disconnected and replaced. When choosing a new fuel line kit, make sure to choose a part like this one, which is a genuine OEM certified part. This fuel line kit is compatible with Jonsered and Husqvarna equipment.
A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.
The flywheel is a heavy metal wheel that connects to the rotating shaft. Its purpose is to help regulate how power is delivered from the motor to the rest of the tool. Its weight and inertia oppose and moderate small changes in the speed of the engine and holds onto that energy for use when needed. The most common problem with flywheels is for them to crack. As the engine begins to age and other parts begin to break down, excess vibration in the engine can cause the flywheel to wear down, grate, and even shatter. The flywheel needs replacing when the motor begins slipping into the wrong gear. The exact steps for replacing the flywheel will depend on the specific model being repaired. It should only require a screwdriver. This is a genuine OEM replacement flywheel assembly for gardening hand tools like leaf blowers, edgers, weed eaters, and hedge trimmers made by Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Paramount, Turf King. This part ships individually.
This handle assembly is a genuine Husqvarna part. It is an appropriate, exact replacement for a missing handle assembly or an original handle assembly that has been damaged. It is a genuine OEM sourced part sourced from the manufacturer. This part of the trimmer/edger is where the switch controlling the throttle is located. It provides the user with an exceptionally comfortable grip while using the trimmer/edger.To repair, remove the original handle and disconnect any electrical connection. Next remove the cutter shaft and throttle cable. Carefully attach the new handle, then reattach the throttle cable and wiring. Users will need a screwdriver, Torx driver, and pliers to replace this part on compatible models. This repair should take under one hour and is appropriate for people with moderate skill levels. The part does not include the throttle cable, which is sold individually.It is compatible with the Husqvarna 122C trimmer/edger, as well as the 122LD trimmer, 122LDx trimmer/edger, and 122LK trimmer, and other Husqvarna models.
The Driver Spring is an OEM part for Husqvarna power equipment. It plays a crucial role in the mechanism of devices such as lawn mowers or trimmers, where it helps to transfer force efficiently within the engine or motor, facilitating smooth and effective operation. This spring is designed to maintain optimal tension and functionality under the stresses of regular use.
Symptoms of a bad Driver Spring include:
Causes of a bad driver spring can include metal fatigue from repeated stress, corrosion due to exposure to moisture and chemicals, or improper installation leading to premature wear.
Maintaining this part in good working condition is essential for the reliability and longevity of your Husqvarna equipment.
Here is an authentic fuel cap assembly that is a replacement for the cap that comes on many gas-powered lawn and garden tools. The cap provides protection and security for the fuel tank opening, so no dirt or debris gets into the fuel. This fuel cap assembly features a retainer, which will keep the cap attached to the tank when refueling. The retainer ensures that the cap does not become lost or fall to the ground. Over time, there could be many issues with the current fuel cap on the machine. It might no longer provide a tight seal. It might no longer have a retainer, or it could have cracked due to age or an accident. Regardless, it is a good idea for owners to get a new fuel cap assembly to ensure the integrity of their fuel. No tools are needed for adding the new cap to the machine. This genuine OEM replacement fuel cap assembly is sold individually. The assembly will work as a replacement for more than 50 machines including edgers, string trimmers, brush cutters, and leaf blowers. It is compatible with models from Husqvarna and Craftsman.
This is a genuine Husqvarna replacement spark plug resistor. A spark plug is an engine component that allows the engine to start. Spark plugs can degrade overtime, which can cause hard starting or ignition failure in the engine. Spark plugs should be replaced once a year depending on how frequently the equipment they are installed in is used. Aside from a visual inspection of the spark plugs, an ignition tester may also be used to determine if they are damaged.Replacing a spark plug is extremely simple. Remove any coverings where the spark plug is located, this is unique to each piece of equipment and can require different tools such as screwdrivers. Use a socket wrench to loosen the old spark plug and unthread it from the machine. Thread in the new spark plug and replace any coverings. This is a genuine Husqvarna replacement part. This specific spark plug is used in Husqvarna brush cutters, trimmers, and edgers. This part is sold separately.
This replacement part is a gasket. It is a genuine replacement part made by Husqvarna. This gasket is typically found in appliances that require an engine to operate. The gasket works with the engine to ensure that everything is running properly and smoothly.A new gasket might be needed if the user notices that the engine is not starting or stopping as effectively as before. If the user notices unusual sounds coming from inside the engine it might be due to a malfunctioning gasket. Be sure the engine is completely turned off before attempting to replace this part. It is also recommended that the user wear work gloves during this repair as parts nearby can cause injury. This gasket is sold individually and is sourced directly from the manufacturer. This is also a genuine OEM replacement part to ensure proper fit and long-lasting use.
This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.
Here is an authentic clutch friction washer that is sourced from the manufacturer. It is for use with several types of handheld outdoor power equipment. Other names for the part include clutch friction disk and clutch washer. The washer works as a friction disk that will help create the proper fit between components in the machine, which helps to engage the clutch. It is made from durable metal. The clutch friction washer that comes with the machine tends to be durable, but it may still need to be replaced at some point. The washer could become corroded, or it could break. It could also become lost when the owner is performing other maintenance on the machine. A wrench and screwdriver will typically be needed to conduct the replacement. Owners should check their manuals to ensure the correct location for installing the washer. The genuine OEM clutch friction washer is sold individually. It can work with more than 150 models of chainsaws, hedge trimmers, and string trimmers. Brands that have models compatible with the part include Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.
This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.
This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.
Here is a replacement screw that can be used for many purposes in a range of handheld outdoor equipment depending on the particular machine and their location in the machine. They hold different parts of the machine together and, when affixed properly, can help to reduce vibration. Screws can become corroded when they are subjected to the elements. This means that they could start to wear away and not be able to provide the same function as before. Some could no longer turn properly because of corrosion and will need to be removed before they worsen. Other times, owners might need to replace a screw because it was lost when they were maintaining the equipment. This is a genuine OEM replacement screw that is sold individually. It is a good idea to have several of the screws on hand to ensure replacements are readily available. This screw can be used in hedge trimmers, string trimmers, leaf blowers, and edgers. Compatible brands include Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Paramount, and Turf King.