Parts for Frigidaire FRSS2623AB2: Ice Container Parts

The Ice Container Assembly is an OEM part for Frigidaire refrigerators. It holds and dispenses ice from the freezer's ice maker. The ice container assembly works with the ice dispenser and auger motor to provide a convenient and accessible source of ice.

A bad ice container assembly can be caused by wear and tear, damage, or improper handling. When the assembly becomes faulty, it can result in issues such as ice not dispensing properly, a jammed or stuck ice dispenser, or leaks from the dispenser area.

Symptoms of a bad ice container assembly include:

• Inconsistent or no ice dispensing
• Jammed or stuck ice dispenser
• Leaks or drips from the dispenser area

Replace your faulty ice container assembly with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Ice Auger Drive Bar is an OEM replacement part for Frigidaire refrigerators. It plays an important role in allowing the icemaker assembly to function properly by transmitting rotational force from the motor to the ice auger. Without a properly functioning drive bar, ice cubes may not be dispensed as needed. Please Note: The nut is no longer separate. It is now part of this drive bar.

Causes of a bad ice auger drive bar can include wear and tear from frequent use, damage due to heavy ice loads, or corrosion from moisture exposure. A malfunctioning drive bar can result in inefficient ice dispensing or complete failure of the ice dispensing mechanism.

Symptoms of a bad drive bar include:

• Ice cubes not dispensing when requested
• Noise or grinding sounds coming from the icemaker area
• Stalling or failure of the icemaker assembly to rotate fully
• Inability to harvest or eject ice from the ice molding trays

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding and connecting the light bulb in the refrigerator, allowing for proper lighting inside the appliance.

A bad light socket can be caused by electrical issues, physical damage, or wear and tear over time. Signs of a faulty light socket include a non-functional light bulb, flickering or dim lighting, or a loose connection.

Symptoms of a bad light socket can include:

• The refrigerator light not turning on 
• Intermittent flickering or dimming of the light
• Difficulty in installing or removing the light bulb
• Visible damage on the socket

Replace your malfunctioning light socket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This evaporator fan motor circulates cold air through the refrigerator evaporator and cabinet to keep temperatures even and prevent frost buildup. Replaces a worn or noisy fan motor to restore proper airflow and cooling performance. What it does:

• Spins the evaporator fan blade to move cold air through the freezer and refrigerator compartments
• Helps maintain even temperatures and efficient cooling when operating correctly
• Can cause increased noise, uneven cooling, or frost buildup if failing
• Stops airflow completely when the motor fails, leading to warming compartments

• Disconnect power to the appliance before any service to avoid shock or injury
• Access may require removing interior panels or the evaporator cover; follow OEM service instructions
• Handle the motor and fan blade carefully to avoid bending blades or damaging connectors

A replacement cover guard that protects internal appliance components and keeps wiring and delicate parts shielded from damage. Restores a clean, finished look and prevents debris from entering service areas. What it does:

• Shields internal components and wiring from accidental contact and debris
• Helps maintain proper airflow routing around covered areas
• Reduces noise from loose or exposed parts by securing the cover area
• Common symptoms: cracked, broken, warped, or missing cover that exposes parts

• Disconnect power to the appliance before starting any repair
• Typically installs by aligning tabs or screw holes and securing with existing fasteners
• Do not force or bend the cover; inspect mounting tabs for damage before installation
• Replace missing or damaged clips or screws to ensure a secure fit

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

Specs: 10-16 X 0.500

This factory replacement screw secures panels, brackets, or trim on your appliance so parts stay tight and aligned. Swap in a new screw when one is missing or stripped to restore a solid, rattle-free fit.

• Fastens compatible panels, brackets, handles, or internal hardware
• Helps maintain proper alignment and stability
• Common fix for loose or wobbly handles/trim, rattling noises, or missing hardware
• Replace if threads are stripped, head is damaged, or corrosion is present

• Disconnect power before servicing; wear cut-resistant gloves
• Use the correct screwdriver or nut driver to avoid stripping
• Start threads by hand to prevent cross-threading
• Tighten until snug; do not overtighten

This solenoid actuator is the electromechanical device that moves a latch or linkage when energized, restoring the appliance's intended mechanical action. It provides a direct replacement to re-enable reliable actuation. What it does:

• Converts electrical signal into a mechanical push or pull to operate a latch, door, dispenser or linkage
• Commonly used where a timed or motor-driven movement is needed during a cycle
• Symptoms this part can cause: appliance fails to actuate a door, latch, dispenser or similar mechanism when called for
• Replacing a worn or failed actuator restores proper mechanical response to control signals

• One solenoid actuator

• Disconnect power to the appliance before beginning work to avoid shock or unintended actuation
• Remove any panels or trim as needed to access the actuator; note wire and mounting locations for reassembly
• Reconnect wiring and test the function on a short cycle after installation

This spring solenoid is the actuator spring assembly that helps move and return a solenoid-driven mechanism, restoring reliable part movement and engagement in affected appliance systems. What it does:

• Provides return tension and controlled movement for a solenoid actuator
• Helps the solenoid plunger snap back after activation so linked components reset
• Commonly replaced when the actuator fails to move, sticks, or does not fully return
• Corrects symptoms such as intermittent engagement, sticking, or loss of actuator motion

• Disconnect power to the appliance before attempting service to avoid shock or injury
• Handle small components carefully; keep track of retaining clips, pins, or fasteners
• Replace with the exact part number to ensure fit and function
• Refer to OEM instructions for step-by-step removal and reassembly

Replacement solenoid that restores electromechanical action for the appliance component it controls, helping restore reliable operation when a worn or failed solenoid prevents movement or actuation. What it does:

• Converts electrical input into mechanical motion to move or hold a controlled mechanism.
• Energizes to engage the component and de-energizes to release it.
• Common symptoms of a failing solenoid: the controlled function doesn't respond, intermittent operation, or a humming/no-movement sound.
• Used as a direct replacement for a failed or sticking solenoid to return normal operation.

• Always disconnect power to the appliance before starting work.
• If the solenoid controls water, shut off the water supply before replacing.
• Match wiring connectors and mounting points; secure the part in the original orientation.
• After installation, restore power/water and test the controlled function for proper operation.

Replacement solenoid that restores electromechanical action for the appliance component it controls, helping restore reliable operation when a worn or failed solenoid prevents movement or actuation. What it does:

• Converts electrical input into mechanical motion to move or hold a controlled mechanism.
• Energizes to engage the component and de-energizes to release it.
• Common symptoms of a failing solenoid: the controlled function doesn't respond, intermittent operation, or a humming/no-movement sound.
• Used as a direct replacement for a failed or sticking solenoid to return normal operation.

• Always disconnect power to the appliance before starting work.
• If the solenoid controls water, shut off the water supply before replacing.
• Match wiring connectors and mounting points; secure the part in the original orientation.
• After installation, restore power/water and test the controlled function for proper operation.

This stop-rotation is the small mechanical stop that prevents uncontrolled rotation of the appliance component, helping parts engage and align correctly for reliable operation. It replaces a worn or broken rotation stop to restore normal movement control. What it does:

• Acts as a physical stop to limit and locate rotation of the linked component
• Keeps assemblies aligned so gears, pulleys, or drums engage properly
• Can resolve symptoms such as loose or misaligned rotation, intermittent engagement, or abnormal movement
• Small, low-profile part used where precise rotation limits are required

• Disconnect power (and water if applicable) before servicing the appliance
• Access may require removing panels or covers; keep fasteners organized
• Inspect mating parts (brackets, shafts, clips) and replace if damaged

The Temperature Sensor (10K NTC) is an OEM replacement part for Frigidaire refrigerators. This sensor monitors the internal temperature of the refrigerator or freezer compartment, sending signals to the control board to regulate cooling cycles. It ensures the appliance maintains the correct temperature for optimal food preservation.

Temperature sensors can fail due to wear over time, electrical issues, or exposure to moisture. A malfunctioning sensor can cause inaccurate temperature readings, leading to improper cooling or freezing.

Symptoms of a bad temperature sensor include:

• Fluctuating or incorrect temperatures in the refrigerator or freezer
• Food spoiling faster than expected or freezing inappropriately
• Error codes related to temperature regulation
• The refrigerator running continuously or cycling too often

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This genuine replacement clip secures appliance components to keep panels and small parts aligned and stable, restoring fit and function. It's a small, durable fastener used where a simple snap or hold is required. What it does

• Holds trim, panels, or small components in place to prevent rattling or misalignment
• Restores secure fit where a damaged or missing clip causes loose parts
• Helps stop vibration noise caused by unsecured pieces
• Small, direct-fit part—replaces a single broken or lost clip

• Disconnect power to the appliance before starting any repair.
• Access may require removing trim or panels; keep track of fasteners.
• Press or snap the clip into place; do not force beyond fit—if it won't seat, recheck alignment.
• Wear gloves and eye protection to avoid cuts from sharp edges.

This grille clip is a small plastic retainer that secures a refrigerator grille or trim piece to the cabinet, keeping the front panels aligned and preventing rattles or gaps for a tidy appearance. What it does:

• Secures the lower/front grille or trim to the appliance cabinet to hold it in place
• Prevents grille movement, rattling, or sagging that can occur with worn clips
• Helps maintain a tight fit between trim and cabinet for a finished look
• Simple replacement part when existing clip is cracked, broken, or missing

• One grille clip

• Typically snaps into place; inspect mating slot and clip orientation before installing
• Replace any damaged adjacent clips for even support and fit
• Work carefully to avoid damaging the grille or surrounding trim