Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Kenmore 106.8615740 (1068615740, 106 8615740): Icemaker Parts

Parts for Kenmore 106.8615740 (1068615740, 106 8615740): Icemaker Parts

Location on Diagram
Part Description
Price & Availability
1
Product photo
4.5 (2)
By: Whirlpool
Part Number: WP98165

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

  • Fastens covers, trims, brackets, and internal parts to the cabinet/frame
  • Used wherever a #8-18 x 5/8 screw is specified
  • Replace if the original is missing, corroded, stripped, or will not tighten
  • Symptoms: loose or rattling panels, gaps, or hardware that backs out
What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:
  • Disconnect power; shut off gas/water before servicing
  • Match thread and length; start by hand to avoid cross-threading
  • Use the correct driver bit and tighten snugly—do not overtighten
  • Inspect and replace damaged clips or tabs before securing

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
2
Best Seller
Product photo
4.9 (39)
By: Whirlpool
Part Number: WP2196157

The Icemaker Fill Tube Fitting is an OEM part for Whirlpool refrigerators. This part connects the water supply line to the icemaker, ensuring a seamless and leak-free delivery of water into the icemaker mold.  

Causes of a bad Icemaker Fill Tube Fitting can include wear and tear over time, mineral buildup from hard water, which can block the water flow or damage the fitting, and improper installation that may lead to leaks or restricted water flow.

Symptoms of a bad Icemaker Fill Tube Fitting include:

  • Water leakage at the connection points, leading to potential water damage or ice buildup in the freezer
  • Insufficient ice production if the fitting is partially blocked or not properly connected, restricting water flow to the icemaker
  • Unusual noise during the icemaker fill cycle, indicating a potential issue with the fitting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

More
$18.66

IN STOCK
Ships Today Guaranteed
Add to Cart
3
Product photo
By: Whirlpool
Part Number: WP965173

Replacement 8-18 thread screw for securing panels, brackets, and trim on appliances. Replace worn, stripped, or missing screws to keep components aligned.

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
4
Best Seller
Product photo
4.9 (22)
By: Whirlpool
Part Number: W10823511

The Ice Maker Water Line is an OEM part for Whirlpool refrigerators. It supplies water from the household plumbing to the ice maker, ensuring a consistent and reliable production of ice cubes. This kit includes a 1/4-inch plastic water line that is approximately 72 inches long. The tubing will need to be cut to match the desired length.

Causes of a bad water line can include wear and tear from prolonged use, kinks or bends restricting water flow, or leaks due to punctures or cracks. A compromised water line can result in inadequate ice production or water leaks.

Symptoms of a bad ice maker water line include:

  • Reduced or no ice production
  • Leaking water from the refrigerator
  • Visible cracks or damage to the water line
  • Ice cubes that are smaller than usual

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$27.37

IN STOCK
Ships Today Guaranteed
Add to Cart
5
Product photo
By: Whirlpool
Part Number: WP488878

Secures water supply hoses to fittings, preventing leaks in ice makers and refrigerators. Replace when rusted, bent, or losing grip. Verify fit.

More
$7.49

IN STOCK
Ships Today Guaranteed
Add to Cart
6
Product photo
By: Whirlpool
Part Number: WP965173

Replacement 8-18 thread screw for securing panels, brackets, and trim on appliances. Replace worn, stripped, or missing screws to keep components aligned.

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
8
Best Seller
Product photo
4.8 (14)
By: Whirlpool
Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
11
Product photo
By: Whirlpool
Part Number: 4387491

Replace cracked or missing compression fitting inserts for 1/4-inch water tubing in refrigerators and ice makers. Prevents leaks at connections.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
13
Product photo
5.0 (2)
By: Whirlpool
Part Number: 627711

This ice tray is the molded bin that holds and releases ice cubes in your refrigerator freezer, offering a simple replacement for cracked, warped, or leaking trays so you can make and store ice reliably. What it does:

  • Holds water in individual pockets that freeze into ice cubes
  • Releases cubes when twisted, flexed, or used with the ejector mechanism
  • Restores proper water containment if the original tray is cracked or warped
  • Helps prevent water leakage into the freezer compartment

What's included:

  • One replacement ice tray

Install notes:

  • Remove any remaining ice and empty water before removing the old tray
  • Typically installs by sliding or snapping into the freezer shelf or bracket—align trays before seating
  • Handle carefully to avoid breaking brittle plastic; wear gloves if needed
  • No tools usually required; follow refrigerator manual for any model-specific steps

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

14
By: Whirlpool
Part Number: 627538
$40.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
18
Best Seller
Product photo
4.8 (23)
By: Whirlpool
Part Number: 4318047

Ice maker not filling or water dispenser not working? This water inlet valve controls flow to your refrigerator's ice and water system. DIY repair.

More
$47.41

IN STOCK
Ships Today Guaranteed
Add to Cart
20
Best Seller
Product photo
4.8 (14)
By: Whirlpool
Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
23
Product photo
5.0 (5)
By: Whirlpool
Part Number: W11693756

Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.

More
$12.54

IN STOCK
Ships Today Guaranteed
Add to Cart
24
Best Seller
Product photo
4.8 (14)
By: Whirlpool
Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
25
Product photo
5.0 (5)
By: Whirlpool
Part Number: W11693756

Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.

More
$12.54

IN STOCK
Ships Today Guaranteed
Add to Cart
26
By: Whirlpool
Part Number: 628391
$29.22

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
32
Product photo
By: Whirlpool
Part Number: 627512

This is a small micro switch used in the ice maker circuit to control the on/off function of ice production. It signals the appliance when to start or stop the ice making cycle based on ice level or timing. Replace this switch if your ice maker fails to produce ice, runs continuously without stopping, or does not cycle on and off properly.

More
$24.72

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
36
Product photo
By: Whirlpool
Part Number: WP628392
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

46
Product photo
5.0 (1)
By: Whirlpool
Part Number: 285448A

Hardware washer distributes load under fasteners to prevent loosening and reduce vibration. Replace when missing or damaged to restore secure fit.

More
$5.34

IN STOCK
Ships Today Guaranteed
Add to Cart
51
Product photo
By: Whirlpool
Part Number: WP2158826

This is a rubber or foam dampener designed to reduce vibration and noise from the compressor or refrigerant tubing. It attaches to the tubing or compressor mount to absorb vibrations during normal operation. Replace this dampener if you hear excessive rattling, buzzing, or vibration noises coming from the back or bottom of the refrigerator.

More
$0.95

IN STOCK
Ships Today Guaranteed
Add to Cart
56
Product photo
4.0 (1)
By: Whirlpool
Part Number: WP488787

Size; 8-18 x 1/2 inch.

More
$11.71

IN STOCK
Ships Today Guaranteed
Add to Cart
58
Product photo
By: Whirlpool
Part Number: 489392

Replacement screw for securing appliance panels, mounting brackets, and internal assemblies. Restores tight connections when original screws are missing or damaged.

More
$12.13

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
71
Product photo
5.0 (4)
By: Whirlpool
Part Number: WP627018

1/4 inch compression nut for securing plastic water lines in refrigerators and ice makers. Replace worn, cracked, or missing nuts to prevent leaks.

More
$11.78

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google