Parts for Husqvarna 966502301: Ignition System Parts

This replacement part is an adjuster kit. This is a genuine replacement part made by Husqvarna. Adjuster kits are used to change the height of the blades in different types of lawnmowers. If the adjuster kit is not working the desired settings might not be achieved. A new adjuster kit might be needed if the user is not able to change the cutting height of the blades before using the machine. This can be due to normal wear and tear over time or other unexpected damage. Be sure to wear work gloves during this repair as this part is typically close to the blades of the machine and can cause injury if the user is not careful.This is a genuine OEM replacement part to ensure proper fit long-lasting use. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement fuel tank. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current fuel tank is defective or broken, this part can be used as a replacement. It is intended for use with a variety of lawn tractor models.The fuel tank holds the lawn tractor's fuel supply. If this part is cracked or broken, the user may notice fuel leaking or inefficient fuel use. Thus, the fuel tank will need to be replaced with a genuine OEM part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this fuel tank, the appropriate owner's manual and equipment diagrams should be referred to. This fuel tank is suitable for use on a variety of lawn tractor models manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable plastic. Part sold individually.

This hex bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is used in multiple applications in outdoor power equipment to connect components, such as attaching the fuel tank to the body of a lawnmower. The hex bolt has a six-sided head that is removed or installed using a hex wrench. Hex bolts can become loosened due to vibration during use and will need to be tightened during regular maintenance. If the bolts are rusted or have fallen out and are lost, replacements can be installed. Always wear gloves when working with equipment. Make sure the equipment has had time to cool down to prevent burns. Locate the part that has a missing or damaged hex bolt. If necessary, remove components that are in the way. Use a hex wrench or box wrench to loosen the bolt that needs to be replaced. Once loosened, the bolt can be manually removed by hand; gripping the sides of the head and turning will unscrew the bolt. Pull the bolt out and insert the one. Screw as far down as possible by hand. Finish tightening using a hex wrench. Do not overtighten.This hex bolt is made of heavy-duty metal and is sold as an individual unit. It is compatible with lawnmowers, lawn tractors, and other machinery manufactured by Husqvarna, Bluebird, Poulan, and Craftsman.

This is a single washer for use with an assortment of lawn and garden equipment. The location of the washer will vary by tool and model. It's made of durable metal and can be used to distribute pressure across another component or can be used to add spacing between two parts. Since washers are small and experience a great deal of pressure, they can become damaged or even lost. If this occurs, other parts will make contact and pressure may not be appropriately distributed in a piece of lawn and garden equipment. If a replacement is needed, locate the area with the washer. Disassemble as needed to visually inspect the part. The washer can be removed by hand or with the help of a flathead screwdriver to pry it up. Replace the original washer with the replacement part and reassemble the equipment. The washer is priced as a single unit and is directly sourced from the manufacturer. It is an authentic OEM replacement component. It's compatible with a variety of string trimmers, tillers, snowblowers, and lawn mowers manufactured by Weed Eater, Husqvarna, and Craftsman.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. This particular spring is found in different types of lawn mowers and provides torque and other energy so that the engine works properly and efficiently. A new spring might be needed if the current one is missing or damaged in any way. It is common that they are put under too much pressure and can snap and need to be replaced. It is recommended that working gloves be worn since these parts can be dangerous to those handling them. Be sure to reference the appropriate user guide for more instructions on how to replace this part.This part is sold as a single piece. This spring is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit and long lasting use.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This fuel valve is a genuine Husqvarna part, sold individually. This fuel valve can be used as a replacement part in a lawn mower. The purpose of the fuel valve in a lawn mower is to allow the intake and the shutting off of fuel feeding into the carburetor of the appliance so that it can be mixed with air in the proper ratio to ignite the spark plugs and power on the engine.The fuel valve in a lawn mower might have to be replaced if the component can no longer regulate the fuel intake and shut off. If fuel is frequently leaking from the area of the fuel valve, if fuel is not being properly channeled into the appliance, or if fuel cannot enter the appliance at all, the fuel valve should be assessed and inspected for potential damage, and if there is sufficient damage, the fuel valve should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This fuel valve is compatible with the following outdoor appliance brands: Husqvarna.