Parts for Husqvarna 966502301: Mowing Deck Parts

Deck spindle assembly for riding mowers and lawn tractors. Mounts under the mower deck to hold and spin cutting blades. Replace if cracked, bent, or worn.

This is a pulley that is used on a zero-turn lawn tractor. It is also referred to as a mandrel pulley. This part spins the blade on the mower deck of the lawn tractor. A new pulley may be needed if the blade is not spinning on the mower deck. Inspect the pulley to check for any signs of cracks, breakage, or damage. There may also be grinding noises coming from the lawn tractor if the pulleys are bad. If there are any of these signs, the pulley will need to be replaced. The pulley is manufactured out of a high-quality metal material. Make sure to use gloves when replacing this part.This pulley is a genuine OEM Husqvarna part. It is sold individually. This particular pulley is compatible with zero-turn lawn tractors that are manufactured by the Husqvarna brand.

Idler bushing for riding mower deck pulleys. Replace when worn to prevent excessive play and belt slippage. Verify fit with your model number.

Replacement hex bolt for riding mowers and tractors. Secures components throughout the mower deck and chassis. Replace if stripped, missing, or damaged.

Prevents parts from loosening due to vibration on your riding mower. This nyloc lock nut uses a nylon collar insert to resist backing off during operation.

Replacement grass discharge chute for riding mowers. Directs clippings away from the deck and operator. Replace if cracked, broken, or missing.

Replacement nose roller that supports the front of your riding mower deck. Needed when roller is cracked, punctured, torn, or worn from ground contact.

Replace your riding mower's 21-inch cutting blade when damaged, bent, or dull. This blade installs under the mower deck for precise cutting performance.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

Carriage bolt for riding mowers and lawn tractors. Secures deck components, blade assemblies, and frame parts. Replace when stripped, rusted, or missing.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

Clevis pin for riding mowers and lawn tractors. Secures linkage connections in steering, brake, or transmission systems. Replace if bent or missing.

This idler arm is a genuine Husqvarna part, sold individually. This idler arm can be used as a replacement part in a lawnmower. This part secures the steering linkage while allowing it free range of motion. If the idler arm is punctured, dented, cracked, chipped, scraped, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part as soon as possible in order to ensure safe continued use.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This idler arm is compatible with the following outdoor appliance brands: Husqvarna.

Hex nut for riding mowers and tractors. Secures components in place throughout the machine. Replace if stripped, corroded, or missing during repairs.

Grease fitting zerk for riding mowers and tractors. Installs at pivot points and bearings. Replace when damaged, stripped, or missing threads prevent lubrication.

Replacement hexagon screw for riding mowers and tractors. Used to secure components throughout the machine. Replace if broken, stripped, or missing.

Pivot bushing enables smooth rotation between mower components. Replace when worn or damaged to restore proper movement. Verify fit with your model number.

Ball bearing for riding mower spindles and wheel assemblies. Replace when you hear grinding noise or feel rough rotation. Verify fit with your model number.

Keep your riding mower engine protected with a fresh oil filter. Removes dirt and debris from oil to prevent engine wear. Replace annually or per manual.