Parts for Jonsered Z54R-96732800100: Ignition System Parts

This part is a replacement fuel tank cap. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, lost or defective fuel tank cap in lawn tractors.The fuel tank cap prevents fuel from spilling from the tank. It also keeps contaminants or debris out. Fuel spills can be dangerous and costly, and contaminated fuel may affect equipment performance. Thus, the fuel tank cap is essential and should be replaced if lost or no longer effective. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel tank cap, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this fuel tank cap is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This throttle cable is a genuine Husqvarna part. It is manufactured as a replacement part for riding mowers, zero-turn mowers, and tractors. The throttle cable connects to the carburetor. Its purpose is to stop the engine when the user shifts the lever to the choke position. It is normal for the throttle cable to wear over time and need to be replaced, especially with heavy use. If the throttle cable is worn, the mower will operate at too high a speed.This is a relatively simple repair to make. Besides safety equipment, only a pair of pliers are required. Please note that this part is sold individually and is not sold with the housing or hardware, which may need to be purchased additionally.This throttle cable is a genuine OEM part sourced directly from the manufacturer. It is compatible with machines manufactured by Poulan, Husqvarna, and Jonsered.

This ignition switch is a genuine Husqvarna replacement part for lawn tractors and lawn mowers. The function of an ignition switch is to allows a user to easily start the mower with a simple turn of a key. A lawn mower or lawn tractor ignition switch might have to be replaced if there is damage to the part that strips it out, such that a key cannot properly fit into it and start the engine. If the ignition switch is damaged to the point of warping, it must be removed and replaced immediately, as a lawn mower or lawn tractor cannot be used without an ignition switch. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ignition switch is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Craftsman. This part sold individually.

This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This fuel check valve grommet is a genuine Husqvarna part, sold individually. This fuel check valve grommet can be used as a replacement part in a lawn mower. The purpose of the fuel check valve grommet in a lawn mower is to affix the connect valve to the fuel tank so that the fuel can pass through these components properly without leaking or being directed elsewhere.The fuel check valve grommet might have to be replaced if it cannot properly direct fuel into the fuel tank. The fuel check valve grommet could suffer damage in the form of tearing, ripping, puncturing, eroding, or warping; if this occurs to the point that fuel is leaking out of the grommet or that fuel is not making its way to the fuel tank through the grommet, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel check valve grommet is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement indicator meter. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current indicator meter is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The indicator meter enables the user to read important messages regarding the hours of operation and other system alerts. This part may become damaged or defective within the normal lifespan of the equipment, thus requiring replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this indicator meter, the appropriate owner's manual and equipment diagrams should be referred to. This indicator meter is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.