Jonsered Parts

Flat idler pulley for riding mowers and lawn tractors. Works with the belt to transfer power from engine to drive system. Replace if cracked or worn.

This is a zone control cable that connects the handle-mounted bail lever to the engine's brake mechanism on a walk-behind lawn mower. When you squeeze the bail bar, this cable engages the blade and keeps the engine running; releasing it stops the blade and engine for safety. Replace this cable if the mower won't stay running when the bail is held, the cable is frayed or stretched, or the lever feels loose and unresponsive.

The replacement mower arm brake pad is sourced directly from the manufacturer. It is used with lawn tractors and is made from metal with an attached brake pad. The arm connects to the idler arm, which helps the driver of the lawn tractor to control the machine's speed. It is an important part of the machine that needs to be in good condition. However, this part could start to wear out over time, just as would happen with brake pads for other vehicles. This could be due to the normal wear and tear associated with using the tractor, or it could be due to corrosion or breaking. Owners will likely require a wrench when replacing the mower arm brake pad. This is a genuine OEM replacement mower arm brake pad, and it is sold individually. The part is for use specifically with certain makes and models of lawn tractor. It will work with more than 150 different machines. Compatible brands include Husqvarna, Craftsman, Poulan, and Ariens.

A mechanical clutch assembly that connects and disconnects the motor drive to the transmission in a top-load washing machine. It allows the machine to spin up gradually, protecting the drivetrain during the transition from wash to spin cycles. Replace this part if the washer tub won't spin, spins slowly, or you hear a grinding or squealing noise during the spin cycle.

This genuine Husqvarna selector knob affixes to the selector spring as part of a mechanism that lowers and raises the handle of the lawn mower for flexible usage.The selector knob might have to be replaced in the event that it suffers damage that impedes its ability to lower and raise the handles of the lawn mower. This kind of damage can occur as a result of general wear and tear from long-term usage, exposure to the elements, or a direct collision that warps the selector knob beyond repair. If any of this form of damage occurs and prevents the adjustability of the handles, the selector knob should be replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This selector knob is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman.

Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.

Metal frame that holds the grass catch bag on walk-behind mowers. Replace if bent, broken, cracked, or damaged from repeated removal and installation.

Mower won't start or starter doesn't engage? This ignition switch activates your riding mower's electrical system. Simple DIY repair in under 30 minutes.

Twin-muffler assembly for riding mowers with two-cylinder engines. Connects to exhaust pipes to reduce noise and emissions. Replace if cracked or damaged.

The v-belt is a replacement part used on mowers and lawn tractors. The v-belt works with the pulley assemblies in the machine to transfer power from the engine to the mower blades so that it can properly cut the grass. The v-belt is made from flexible rubber, and over time, the belt can be prone to wear and tear. Owners should check their belts occasionally to ensure they are not wearing out. This could cause the belt to become cracked and brittle, which would require a replacement. If the belt is not working properly, or if it is broken, it will not be possible to transfer power from the engine to the blades. This is a genuine OEM part that is sold individually. This pulley will work for a range of lawn mowers and lawn tractors. The v-belt is compatible with many brands including Craftsman, Husqvarna, Ariens, Dixon, and Poulan. It is important for buyers to make sure they are getting the proper v-belt, including the size, when they are buying their replacement part.

Steering shaft connects the steering wheel to the gearbox on riding mowers and lawn tractors. Replace if bent, cracked, or worn for proper steering control.

Hardened washer for lawn tractors and riding mowers. Installs with bolts to redistribute pressure and prevent loosening. Replace if worn or missing.

Idler pulley for riding mowers and tractors. Maintains proper belt tension for drive system. Replace if pulley is cracked, worn, or spinning rough.

This pawl drive is a genuine Husqvarna part, sold individually. This pawl drive can be used as a replacement part in lawn mowers and chainsaws. This pawl drive is made out of durable metal. A pawl drive might have to be replaced within the standard lifespan of a lawn mower or a chainsaw. A pawl drive could suffer damage as a result of general long-term usage or from a direct collision with a falling object or a hard surface; this damage could come in the form of puncturing, erosion to the metal material, or warping the part beyond repair. If this is the case, the pawl drive should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Pawl drive is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Weed Eater, and Ariens.

Brake linkage for riding mowers and lawn tractors. Connects between the idler arm and brake arm assembly. Replace if bent, broken, or missing.

Internal spring for walk-behind lawn mowers. Secures various components while allowing flexibility. Replace if stretched, broken, or no longer holds tension.