Ikea Range / Cooktop / Oven Parts

Surface ignitor restores the ignition spark to a gas range surface burner so the burner can light reliably. Use this direct replacement when a burner produces weak sparks or won't ignite. What it does:

• Generates the spark that ignites gas at a surface/burner assembly.
• Replaces a cracked, worn or non-sparking electrode to restore ignition.
• Commonly used when a burner clicks but does not light or produces intermittent sparks.
• Works as the single electrode component in a surface burner ignition assembly.

• Turn off electrical power and gas supply before service.
• Handle the ceramic tip carefully — avoid touching or bending the electrode.
• Ensure proper connection of the ignitor's wire and correct seating in the burner assembly.

Color: White

The Control Knob is an OEM part for Frigidaire cooktop. It functions as the interface to select cooktop burner settings or oven temperature/function options. 

Located on the surface of the range control panel, the knob directly controls gas valves via the electronic control board behind the panel. Turning it selects precise flame levels or bake/broil temperatures with a click into place.

Causes of a bad control knob can include worn drips from steam cleaning, loosened mounting clips from normal rotating wear, or cracks from accidental impact. 

Symptoms of a bad control knob include: 

• Burners or oven not responding to setting adjustments
• Knob easily coming loose or off the control shaft 
• Flames not igniting or staying lit at selected levels

Replacing the knob with a genuine Frigidaire part ensures dependable inputs to the control system. This supports accurate, safe range operation. Compatible with Electric and Gas ranges from Electrolux, Gibson, Kelvinator and Kenmore as well.

This broiler pan is the heat-safe tray used for broiling in the oven or broiler drawer. Replace a rusted, warped, or missing pan to maintain safe broiling and simpler cleanup by catching drippings.

• Holds food for broiling and supports correct placement under the broiler
• Collects drippings to help reduce flare-ups and smoke
• Restores safe use when the original pan is rusted, pitted, dented, or warped
• Seats on the designated rails/supports in the broiler drawer or compartment per model design

• Allow the appliance to cool completely; wear cut-resistant gloves
• Remove the broiler drawer or open the broiler compartment as your model requires
• Position the pan on the proper rails/supports and verify stable seating before use
• Follow your model's user guide for broiling setup and care

This cast-iron range grate provides a stable cooking surface over gas burners so pots and pans sit level for safer, more even cooking. It replaces a chipped, cracked or warped grate to restore stability and proper cookware support. What it does:

• Supports cookware above the burner for even heat distribution and stable cooking
• Replaces broken, warped or damaged grates that cause cookware to wobble
• Helps position cookware so burner flames heat pans correctly
• Durable cast-iron construction resists regular wear from everyday cooking

• Allow the range to cool completely before handling grates; wear gloves if needed for heavy cast iron
• Lift old grate straight up to remove and set the new grate into the cooktop recess so it sits flat and stable
• Clean grates according to manufacturer recommendations; avoid harsh abrasives that can damage finish
• If any burner or cooktop damage is present, verify proper cooktop operation before regular use

The Grommet is an OEM part for Whirlpool gas cooktops. It forms a protective barrier and seal where wiring or mounting bolts pass through ventilation cutouts.

Causes of a bad grommet typically include degradation of the rubber material over time due to heat exposure during cooking. Physical stress from repeated installation/removal can also crack or loosen the seal.

Symptoms of a bad grommet include:

• Air leaks appearing around wiring/bolt openings  
• Drafts disturbing burner or element temperatures
• Noise from loose fixtures rattling 
• Risk of sparks near exposed connections

Replacing with an OEM grommet restores the protective seal while blending seamlessly with range aesthetics. Compatible brands include KitchenAid, Jenn-Air, and select Kenmore cooktop models. 

The Surface Igniter is an OEM replacement part for Whirlpool gas ranges. It is responsible for generating the spark needed to ignite the gas, ensuring a consistent and controlled flame for cooking.

Symptoms of a bad electrode igniter include:

• Burner not igniting
• Weak or intermittent sparks
• Clicking sound without ignition

A faulty or worn-out electrode igniter can occur due to normal wear and tear or accidental damage. If you notice issues such as the burner not igniting, weak or intermittent sparks, or a clicking sound without ignition, it may be time to replace the electrode igniter.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Knob is an OEM part for Frigidaire ranges. It is responsible for controlling the various functions and settings of your range, allowing you to adjust the temperature and operate the burners.

A bad knob can occur due to wear and tear over time, accidental damage, or exposure to heat and moisture. Signs of a faulty knob include difficulty in turning, a loose or wobbly fit, or the control markings wearing off.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting 
• The knob feeling loose
• Cracks or discoloration 

Replace your worn-out or damaged range knob with this genuine OEM Frigidaire part to restore your range. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Color: White

This replacement control knob restores user control of your range or oven by turning temperature and function settings smoothly and visibly. It's a direct-fit style knob used on many Frigidaire cooktop and oven models. What it does

• Provides a secure grip to adjust burner or oven settings.
• Replaces cracked, stripped, or missing knobs that prevent accurate control.
• Restores tactile click and alignment for clear setting indication.
• Helps prevent accidental setting changes with a snug fit on the control shaft.

• One control knob as pictured.

• Pull the old knob straight off the control shaft and push the new knob on until fully seated.
• Confirm the shaft and knob orientation match so indicator lines align with control markings.
• Unplug the appliance or shut off power at the breaker before accessing internal controls when disassembly is required.
• If the knob feels loose or won't seat, inspect the control shaft for damage—do not force the knob.

Color: Stainless

A replacement evaporator fan motor that circulates cold air across the evaporator and through the fresh food and freezer compartments to help maintain even temperatures and consistent cooling performance. What it does:

• Powers the evaporator fan to move cold air through the refrigerator and freezer.
• Restores airflow when a failed fan motor causes uneven cooling or warm spots.
• Stops continuous frost build-up on the evaporator caused by poor or no airflow.
• Eliminates loud grinding, buzzing, or rattling noises coming from the freezer area.

• Disconnect power to the appliance before attempting any repair to avoid electrical shock.
• Access typically requires removing interior panels or the evaporator cover; keep track of screws and clips.
• Handle the fan blade carefully and test operation after restoring power.

Replacement gasket that restores a tight seal to the appliance door and helps prevent water or air leaks. Replaces worn, cracked, or compressed seals so the door closes properly and reduces moisture or heat loss. What it does:

• Seals the door opening to stop leaks of water, steam, or heated air.
• Helps maintain proper temperature and efficiency by preventing air exchange.
• Reduces condensation, odors, and cycling caused by a poor seal.
• Common signs you need this part: visible gaps or damage, leaks around the door, excess moisture, or poor heating/cooling performance.

• Disconnect power and water (if applicable) and allow the appliance to cool before starting.
• Clean and dry the mating surface to ensure a proper fit; remove old adhesive or debris.
• Align the gasket into the door channel or groove and press evenly; avoid stretching the material.
• If the door or mounting hardware is bent or damaged, repair those parts before installing the gasket.

This is a replacement surface burner control knob that lets you turn the cooktop burner valve on and adjust flame or heat level. A fresh knob restores smooth, accurate control and a clean look when the original is worn or damaged.

• Provides user control of the surface burner valve (Off to Hi/Lo settings)
• Common failure signs: cracked or stripped insert, knob wobbles, slips, or will not turn the valve, missing/broken knob
• Restores proper alignment and tactile feel when selecting heat levels
• Durable construction with stainless-look finish to match the original

What's included: One surface burner control knob. Install notes:

• Disconnect power and allow the cooktop to cool before servicing
• Pull the old knob straight off the valve stem; align flat(s)/D-shape and press the new knob on by hand
• Do not force; if it won't seat, re-check stem alignment and orientation
• Knob turns smoothly through the full range and points to the correct markings

The burner base is the metal burner head that supports the burner cap and directs the cooktop flame. Replacing a damaged burner base helps restore steady ignition and more even heat for everyday cooking. What it does:

• Provides the mounting surface and gas-port pattern for a surface burner and accepts the burner cap.
• Directs the flame for consistent heat across cookware.
• Common symptoms of a failing burner base: uneven or weak flame, burner won't light, visible corrosion or physical damage.
• Can cause repeated ignition attempts or poor heating when cracked, bent, or clogged.

• Turn off electrical power and the gas supply before servicing the range.
• Remove burner grates and caps to access the base; depending on model the base may lift out or be secured with fasteners.
• Inspect the igniter and surrounding components while replacing the base; reassemble and test the burner for proper ignition and flame pattern.

This surface burner head replaces a worn or clogged top burner on gas ranges and cooktops, restoring a steady, even flame and reliable ignition so your burners heat consistently for everyday cooking.

• Mixes gas and air to produce the cooking flame
• Works with the igniter to light the burner
• Directs flame evenly around cookware
• Common symptoms: weak or uneven flame, yellow tipping, delayed ignition or no light, soot, or popping noises

• Disconnect electrical power and shut off the gas; allow the cooktop to cool completely
• Remove grate and burner cap; take out the mounting screw(s) and lift off the old burner head
• Align the new head with the igniter and orifice holder; reinstall screw(s) and the cap
• Restore gas and power; test ignition and verify a clean, even flame

• Many models use different burners by position and output; match the exact part number for the correct location
• Clear clogged ports with a soft brush or compressed air—do not enlarge ports with pins or drill bits

Color: Black.