Inglis Dryer Latch, Catch, Lock Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11307244
The lid lock is an OEM replacement part for Whirlpool washers. It is designed to keep the door securely closed during operation.
Symptoms of a faulty lid lock:
- Washer will not start
- Washer stopping randomly during operation
- Lid will not lock
By replacing the latch, you can restore door closure and prevent interruptions in your washer's operation. Improve your washer's safety and efficiency with this durable Lid Lock Assembly.
This latch can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Please note: The part might arrive in the locked position. Install the lid lock and power up your washing machine to reset the lock to the open position.
Do-It-Yourself Stories from Customers like You
The washer would not go into spin mode only partial wash and drain Karen T. • Dearborn Heights , MI • August 11, 2017
The part is so new no video so I went onto a similar part and watched video that got me about 80%. Then, called and customer service sent me a service Manual but this still was not specific so I broke the old to get it out and in the process figured out how to do it correctly. So I installed the last bit of it which was the bezel through the machine top by myself correctly. So you take the old one out by pushing out to the right from the bottom side using a screw driver for leverage. It will...
Read more
More
$97.50
- Compare At:
-
$115.05
- You Save:
-
$17.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W11429587
The Dryer Door Catch is an OEM part for Whirlpool dryers. It keeps the dryer door securely closed during operation.
A bad door catch can occur due to regular use, wear and tear, or accidental damage. If you notice that the dryer door is not staying closed or is popping open during the drying cycle, it may indicate a problem with the door catch.
Symptoms of a bad door catch include:
- The dryer door not staying closed
- Difficulty in properly latching the door shut
- Loud banging noises or vibrations
Replace your faulty dryer door catch with this genuine OEM part to restore your dryer door.
This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Dryer door catch broke, unable to close the door! Stella H. • Beverly Hills , FL • April 10, 2020
I watched your video and had it fixed in less than 1 minute!
Read more
More
$20.95
- Compare At:
-
$25.14
- You Save:
-
$4.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11429589
This replacement door strike provides the solid catch point the latch/lock grabs so the appliance recognizes the door or lid is closed and can run safely. A worn, bent, or broken strike can interrupt operation. What it does
- Forms the fixed catch for the door/lid latch or lock
- Helps actuate the interlock/safety switch so a cycle can start
- Misalignment or damage can keep the door from latching and stop cycles
- Common symptoms: door/lid won't latch or stay closed, unit won't start, "Door/Lid" or "Lock" message, needing to hold the door shut, visible cracks or wear on the strike
What's included
Install notes
- Disconnect power to the appliance before servicing
- Open the door/lid and remove the mounting screws securing the old strike; retain hardware if it is reused
- Position the new strike in the same orientation and tighten screws snugly; avoid over-tightening to prevent damage
- Close and open the door/lid to confirm smooth latch engagement, then run a brief test cycle
Do-It-Yourself Stories from Customers like You
Door latch broken had to tape the door shut to dry clothes Lisa M. • Ozark , MO • March 11, 2016
I ordered the male and female door latching parts.
Read more
More
$19.95
- Compare At:
-
$23.54
- You Save:
-
$3.59