Parts for Ge PVM9179BR1TS: Interior Parts (2) Parts

This ventilation motor drives the vent fan to remove smoke, steam and cooking odors from the range hood assembly. It restores proper airflow so the ventilation system can clear air more effectively during use. What it does

• Replaces a worn or failed vent fan motor so the hood or microwave exhaust regains suction.
• Helps stop symptoms like no airflow, weak exhaust, or unusual motor noise during vent operation.
• Works with the fan/blower assembly to move air through the vent duct and filters.
• Matches OEM function and mounting so it integrates with the existing blower housing.

• One motor-ventilation (single motor unit)

• Install only with the appliance unplugged or power turned off at the breaker.
• Handle the motor and wiring harness carefully; reconnect all plugs and fasteners exactly as removed.
• Verify fan spins freely after installation before reassembling covers or panels.

The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.

Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.

Symptoms of a bad fuse include:

• The microwave suddenly stops working.
• No signs of power or response even when the microwave door is closed and the start button is pressed.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A temperature sensor assembly that monitors internal temperatures and sends readings to the appliance control so the unit can maintain proper heating or cooling. Replacing a failed sensor restores accurate temperature regulation and consistent performance. What it does

• Detects and reports temperature to the electronic control or thermostat
• Helps the appliance maintain set temperatures for consistent operation
• A faulty sensor can cause inaccurate temperature readings or uneven heating/cooling
• May trigger temperature-related error codes or put the unit into a diagnostic/fail-safe mode

• Disconnect power to the appliance before attempting any repair
• Handle the sensor and its wiring gently; avoid bending or damaging the sensing tip or connectors
• Reconnect wiring securely and confirm correct routing to prevent interference with moving parts

This wiring harness assembly connects and routes electrical power and control signals between components, restoring reliable electrical paths so affected functions operate correctly. It's a direct-replacement harness used to repair damaged or worn wiring assemblies. What it does:

• Provides secure electrical connections between control components and motors/heaters/sensors
• Replaces cracked, frayed, or burnt wires that can cause intermittent operation
• Helps resolve symptoms like loss of function, no power to specific components, or intermittent cycling
• Maintains correct wire routing and connector fit to prevent shorts and arcing

• One wiring harness assembly as shown

• Disconnect power to the appliance before starting any repairs to avoid shock or injury
• Match connector shapes and wire colors to the original harness; route wires the same way to avoid interference with moving parts
• Inspect connectors and terminal ends for damage and secure all fasteners; do not splice unless manufacturer-approved

A refrigerator temperature control thermostat that regulates internal cooling to keep food at the right temperature. Replaces a faulty control to restore proper cycling between compressor on/off and help maintain consistent fridge temperatures. What it does:

• Senses cabinet temperature and signals the compressor or control system to start or stop cooling
• Commonly used to correct a fridge that runs constantly or won't cool enough
• Helps restore regular on/off cycling and temperature stability when original thermostat fails
• Fits into the temperature control assembly and connects to the refrigerator's wiring harness

• Disconnect power to the appliance before installing to avoid shock or damage
• Basic hand tools are typically required; avoid forcing connectors or mounting clips

A replacement charcoal filter that helps reduce food and refrigerator odors to keep interior air fresher. Fits compatible refrigerator filter housings and installs easily so your fridge smells cleaner between replacements. What it does

• Uses activated charcoal to help absorb and reduce food and lingering odors inside the fresh-food compartment
• Helps maintain fresher-smelling air when opening the refrigerator door
• Works with the refrigerator's air circulation system to target airborne odors and impurities
• Common symptom: persistent or strong food odors or a stale smell inside the fridge

• Follow your refrigerator owner's manual for exact filter location and replacement procedure
• Replace with same orientation as the original; handle with clean hands and avoid contaminating the filter media
• Dispose of the used filter per local regulations

The Charcoal Filter is an OEM part for GE microwaves and range hoods. This filter helps to remove smoke, odors, and grease from the air during cooking. It is designed to fit securely within the microwave or range hood, providing efficient filtration and improving the overall air quality in the kitchen. The filter measures approximately 2-1/2 in. x 11 in. x 3/8 in.,

Causes of a bad charcoal filter can include prolonged use without replacement, accumulation of grease and food particles, or exposure to excessive smoke. Over time, the filter loses its effectiveness and requires replacement to maintain optimal performance.

Symptoms of a bad charcoal filter include:

• Increased smoke or odors while cooking
• Reduced air flow or ventilation efficiency
• Noticeable grease buildup on the filter
• Unpleasant smells lingering in the kitchen

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This halogen replacement lamp provides bright, clear interior lighting so you can check food without opening the oven door. Designed for direct swap into compatible oven and range light sockets to restore visibility. What it does:

• Produces bright, focused light for oven and range interiors
• Restores visibility when the oven light is dim or not working
• Suitable where a halogen capsule-style lamp is specified
• Helps prevent overcooking

• Make sure the appliance is turned off and completely cool before replacing the lamp
• Disconnect power at the breaker or unplug the appliance for added safety
• Use a clean glove or cloth when handling the lamp to avoid skin oils on the bulb

A direct-replacement supporter housing that secures and aligns internal components for stable operation. Restores proper positioning inside the appliance so parts sit correctly and function as intended. What it does

• Provides a secure mounting point and structural support for internal components.
• Keeps parts properly aligned to prevent binding, rubbing, or premature wear.
• Helps reduce movement that can lead to rattling or vibration-related noise.
• Maintains correct clearances so associated parts operate smoothly.

• Disconnect power (and water if applicable) before starting any repair.
• Basic hand tools required; handle plastic housings gently to avoid cracking.
• Verify proper orientation and secure fasteners snugly—do not overtighten.