Parts for Ge PVM9179BR1TS: Oven Cavity Parts

This mount vent motor cover secures and protects the dryer vent motor assembly so the motor stays aligned and free from debris. It helps reduce abnormal noise and vibration while maintaining safe airflow through the vent housing. What it does:

• Secures the vent motor to the housing to keep the motor stable during operation
• Protects the motor from lint, dust, and foreign objects that can cause damage
• Helps reduce rattling, vibration, and noise caused by a loose motor mount
• Maintains proper airflow routing around the vent motor for efficient operation

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; retain or replace any mounting screws as needed
• Watch for sharp sheet-metal edges and wear gloves to protect your hands
• Verify motor alignment and secure fasteners snugly but avoid over-tightening

Restore the finished look and proper airflow of your appliance with this vent grille. It covers the ventilation opening at the front/top of the unit, directs exhaust air, and provides access to serviceable areas where applicable.

• Covers the vent opening and helps direct exhaust airflow away from the cabinet
• Restores a clean, finished appearance to the front/top of the appliance
• Common reasons to replace: cracked or broken grille, missing or loose piece, broken mounting tabs, rattling or vibration

• Disconnect power to the appliance before servicing
• Remove the existing grille by taking out retaining screws or releasing tabs; note orientation and screw locations
• Position the new grille, start screws by hand, and tighten evenly without overtightening
• Restore power and confirm secure fit and unobstructed vents

This lamp bracket secures the oven/range light assembly in place so the bulb and socket stay aligned for reliable interior lighting. It restores a stable fit when the lamp or housing is loose or mispositioned. What it does:

• Holds the lamp socket or housing firmly to the appliance cavity to prevent movement and rattling.
• Maintains proper lamp alignment so the bulb illuminates the cooking cavity as intended.
• Helps reduce intermittent lighting or poor contact caused by a loose bracket.
• Fits into the lamp/light housing area and provides a mounting point for the bulb assembly.

• One lamp mounting bracket.

• Disconnect power to the appliance before starting any repair to avoid shock hazard.
• Remove the bulb and any trim or covers to access the bracket; handle the bulb with gloves or a cloth.
• Typical installation uses basic hand tools; keep track of screws and orientation for reassembly.
• If wiring or the lamp socket is damaged, inspect and replace those components separately.

The Grease Filter is an OEM replacement part for GE microwave ovens. It is located inside the range hood above the cooktop and works to trap grease, oil, and other residue from cooked foods. 

Causes of a bad grease filter include normal accumulation of residue over time, exposure to high heat, or accidental damage during cleaning. 

Symptoms of needing a new grease filter are:

• Grease or residue building up outside of the filter area   
• Decreased or reduced airflow from the range hood
• Difficulty removing ingrained residue from the reusable filter

This replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges. 

This lamp bracket secures the oven/range interior light assembly so the bulb and lens stay properly positioned for reliable interior lighting. Replacing a damaged bracket restores stable lamp mounting and prevents rattling or misalignment. What it does

• Holds the interior lamp/lens assembly in place to maintain consistent oven lighting
• Keeps the bulb aligned and protected from movement or contact with oven components
• Helps prevent noise or rattling caused by a loose or broken bracket
• Common symptom: interior light housing is loose, the bulb shifts, or the lens won't stay mounted

• One lamp bracket

• Disconnect power to the appliance (unplug or switch off at the breaker) before starting any repair
• Allow the appliance to cool completely if recently used; work only on a cool oven interior
• Replacement typically requires removing the lamp lens or access panel and fastening with the original screws
• Handle the lamp and lens carefully to avoid damage; replace burned or damaged bulbs with the correct rated type

This rack holder supports the removable rack inside the appliance cavity, keeping it level and secure during use. Replace a cracked or missing holder to restore proper rack positioning and safer, more reliable operation.

• Provides a fixed support point for the rack inside the cavity
• Keeps the rack level and prevents tipping or slipping
• Helps the rack slide in and out correctly when supports are intact
• Common signs to replace: rack won't stay in place, tilts or falls, visible damage or missing holder

• Disconnect power and allow the appliance to cool completely before servicing
• Remove the rack to access the holder
• Remove the fastener(s), note orientation, and swap in the new holder
• Reinstall the rack and confirm it sits securely before use

This safety cover protects internal wiring and components by enclosing delicate parts and helping prevent accidental contact. It restores a safe barrier and helps avoid shorting or debris buildup in the affected area. What it does

• Covers and protects wiring, connectors and nearby components from contact and debris
• Helps prevent accidental electrical contact and reduces risk of shorts where the cover is installed
• Commonly replaced when the original cover is cracked, melted, broken or missing
• Helps restore proper component spacing and secure mounting of nearby parts

• One safety cover

• Disconnect power to the appliance before servicing; verify it cannot be energized
• Remove panels or trim as needed to access the cover; keep fasteners for reinstallation
• Align mounting tabs or screw holes and secure with the original hardware
• If wiring or components show damage, replace or repair those items before reinstalling the cover