Jade Dishwasher Spring Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP912652
The Door Spring is an OEM part for Whirlpool dishwashers. This part allows the smooth and controlled operation of the dishwasher door. The spring helps balance the weight of the door, allowing it to open and close effortlessly without slamming shut.
Causes of a bad door spring can include wear and tear from repeated use, corrosion or rust, and breakage due to excessive force or mishandling.
Symptoms of a bad door spring include:
- The dishwasher door dropping quickly or not staying open
- Difficulty in opening or closing the door
- Unusual noises when moving the door
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Heard a loud bang and thought a door spring on my 20 year old maytag dishwasher had broken George T. • Naples , FL • September 27, 2014
Without knowing exactly what broke I ordered 2 springs and 2 door spring links. I knew the door springs were weak and a parts man told me many years ago to always replace BOTH springs or the one you didn't replace will soon break. It is a simple procedure, just remember how the springs/links are attached. make a simple drawing or take a picture should you need it. I watched two "how to" video's
which made it look harder to do than it really is. Turn the circuit breaker off and turn the...
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003118
Restore safe, smooth door operation with this dishwasher door spring. It counterbalances the door's weight so it opens and closes in a controlled way, preventing a sudden drop when the original spring breaks or fatigues.
- Provides the tension that counterbalances the dishwasher door through the hinge mechanism
- Helps prevent the door from slamming open or feeling unusually heavy
- Restores smooth, even door movement side-to-side
- Typical symptoms: door drops quickly, feels heavier than normal, uneven motion, or a visibly broken/stretched spring
What's included: 1 door spring Installation notes:
- Disconnect power and shut off water before servicing
- Remove the toe/kick panel to access the hinge area
- Support the door, then move it slightly to relieve tension before unhooking the old spring
- Attach the new spring between the frame anchor and hinge arm; if your model uses two springs, replace both sides for even tension
Do-It-Yourself Stories from Customers like You
Door spring broke after only two years of use my first dishwasher lasted over 25 years with no problems Timothy R. • Burtonsville , MD • April 23, 2016
Open the dishwasher door and remove the 2 screws on each side of the door frame. Pull out dishwasher from under counter just enough to replace the spring. Push dishwasher back in place and reinstall the four screws.
Read more
More
$25.95
- Compare At:
-
$30.88
- You Save:
-
$4.93