Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Jenn-Air Washer Bearing Parts

Best Seller
Jenn-Air Thrust Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002213

The Thrust Bearing Kit is an OEM part for Whirlpool washing machines. This kit is essential for the proper operation of the washer's transmission system, allowing the drive system to engage smoothly and efficiently. 

Over time, components within the thrust bearing kit can wear down or become damaged due to the constant stress and movement they endure during the wash cycle. This wear can lead to issues with the washing machine's ability to agitate or spin correctly.

Symptoms of a bad Thrust Bearing Kit include:

  • The washing machine is noisy during operation
  • The washer struggles to agitate or spin
  • The washing machine may fail to spin at all, leaving clothes wet at the end of the cycle
  • Excessive vibration during use

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Spins slowly
  • Pumps but will not spin
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Washer squeaked when tub is stopped during spin cycle   Daniel K. • Grafton , WI • July 22, 2018

My Maytag washer make a loud screech when the washer tub needed to be stopped by the brake. Last year, I had replaced the suspension springs, the snubber ring, the drive belt and the drain pump. Those repairs worked fine, but a few weeks later, the screeching noise started. So I figured it was the brake system. I thought it would be better to replace the brake rotor and stator together as a set since I was going to disassemble both and they were 18 years old anyway. I decided to replace the... Read more

More
$43.95
Compare At:
$59.58
You Save:
$15.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Jenn-Air Tub Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 6-2040130

The Tub Bearing Kit is an OEM part for Whirlpool washers. It includes all the necessary components to replace the tub bearing which is responsible for supporting the inner tub and allowing it to spin smoothly during the wash cycle. Over time, the bearing may wear out or become damaged, leading to excessive noise, vibrations, or even leaks from the washer.

Causes of a bad tub bearing can include regular wear and tear, exposure to heavy loads or unbalanced loads that put excessive strain on the bearing, or damage due to water leaks.

Symptoms of a bad tub bearing include:

  • Excessive noise or grinding during the wash cycle.
  • Vibrations or shaking of the washer.
  • Leaks from the washer, around the tub area.
  • The inner tub not spinning or becoming stuck.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Note: It is advised to replace the Mounting Stem Repair Kit, part number 6-2040130 at the same time.  To complete the repair, you’ll also need a Spanner Wrench to complete the repair (TB123B).

Do-It-Yourself Stories from Customers like You Leakage from tub seal   Gabriel S. • Petaluma , CA • March 15, 2015

I ordered the tub seal and stem seal kits along with the much needed spanner wrench. After viewing the video online several times and taking notes along the way I was ready to tackle the repair. After taking everything apart, I cleaned all areas thoroughly then addressed the rusty areas and mineral deposits found in the tub. Soaking the tub in vinegar and baking soda overnight helped loosen the built up deposits enough so I could carefully scrape them off with a spatula. This was very time... Read more

More
$56.95
Compare At:
$67.77
You Save:
$10.82

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Jenn-Air Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003441

The OEM Replacement is a bearing designed to function as the rear bearing in Whirlpool front-load washers. It also works as the upper brake bearing in top-load washers. Positioned near the tub's brake assembly, this component plays a significant role in the operation of the washer. In top-load washers, it resides above the brake assembly.

Causes of a bad bearing can include prolonged wear and tear, exposure to excessive loads, or water intrusion that leads to rust and corrosion. A compromised bearing can lead to more significant issues if not addressed promptly.

Symptoms of a bad bearing include:

  • Loud, unusual noises during the wash or spin cycles
  • Excessive vibration or movement of the washer
  • The drum not rotating smoothly or becoming stuck
  • Leaks around the drum area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Noisy spin cycle   Gregory E. • Halifax , PA • April 17, 2017

I just wanted to put my experience here for all to see. I have a Maytag Neptune, MAH5500BWW, one of the original ones. I bought it back in 2002 and it has done many many loads of wash faithfully. So when the bearings started to get loud I thought it best to replace them, the seal kit and the belt. I did my research as best I could and decided to order the OEM parts from an appliance supplier. If you are replacing the bearings, watch on line videos prior to performing the job. It will... Read more

More
$17.95
Compare At:
$21.18
You Save:
$3.23

IN STOCK
Ships Today Guaranteed
Add to Cart

When it comes to keeping your laundry running smoothly, Jenn-Air washer bearing replacement parts are an essential component to consider. These parts play a crucial role in maintaining the washer's overall performance, ensuring your clothes come out fresh and clean every time. Owning a high-quality appliance like a Jenn-Air washer means that only the best parts should be used for replacements, and bearings are no exception.

Jenn-Air washer parts, especially bearings, are designed to help the drum spin quietly and efficiently. Over time, even the best bearings can wear out, leading to noise and reduced efficiency. That's where OEM Jenn-Air washer bearing replacement parts come in handy. These original parts are crafted to fit perfectly and work seamlessly with your washer, restoring its original functionality and performance.

Having access to reliable Jenn-Air replacement parts means you can keep your washer in top condition without the hassle. With the right bearings, your appliance will continue to operate smoothly, tackling loads of laundry with ease. So, no need to worry—quality and compatible parts are readily available to keep your Jenn-Air washer running like new.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store