Jonsered Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This part is a replacement engine pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or damaged engine pulley on lawn mowers.The engine pulley is what drives the equipment's transmission belt. If this pulley is worn or malfunctioning, the blades of the mower or tractor will not rotate properly, if at all. Thus, this part should be replaced in order for the equipment to function properly. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this engine pulley, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this engine pulley is suitable for use on several models of lawn mowers and lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This fuse is a genuine Husqvarna part, sold individually. This fuse can be used as a replacement part in a lawn mower. The purpose of the fuse is to protect the lawn mower from exceeding the maximum electrical current of which the appliance is capable of withstanding.The fuse of a lawn mower can be blown, and if the fuse cannot be repaired, the component should be removed and replaced by this genuine OEM replacement part. Signs of a blown lawn mower fuse can include a punctured, torn, frayed or smeared wire. It is a simple replacement process that will require only basic tools to properly execute. Make sure to reference the appropriate manuals when conducting this replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuse is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Ryobi, and Jonsered.

This is a bellcrank ground drive intended for use with riding mowers, tractors, and trimmers. The bellcrank ground drive employs the idler pulleys when the pedal brake control shaft assembly is pressed. A new bellcrank may be needed if the original was faulty, or if it becomes significantly worn through general operation of the machinery. However, installation of a new bellcrank is relatively simple. Only a few tools will be required when replacing this item, including: a socket set, a set of pliers and a hex wrench. The removal of the mower deck will also be required. The user should refer to their owner's manual for guidance regarding their specific model.This is an OEM part sourced directly from the manufacturer. It is sold individually. The bellcrank ground drive is designed for use in Husqvarna, Poulan, Weed Eater, and Jonsered models.

This washer is used in the steering column of lawn mowers and lawn tractors. It is silver with smooth edges, and it fits bolt shoulders crafted by Husqvarna. Washers are flat pieces of steel used to prevent stripping of bolts and screws.This part is intended to be used in conjunction with a bolt shoulder and bracket deck suspension. Place the washer against the bracket deck suspension and screw the bolt shoulder through the hole in the washer. This keeps the washer in place and creates a buffer between the bolt and the bracket. Failure to use a washer will prevent the bolts from tightening appropriately and negatively impact load suspension. These washers are expertly crafted. Still, washers may need to be replaced due to rusting or corrosion. These issues, combined with regular wear and tear, can cause the washers to fail or break over time.This washer is compatible with numerous mower models and personal use tractors, including Husqvarna, Poulan, Ariens, and Craftsman. This piece fits any model produced by Husqvarna that requires part #532199162. Sold individually. This part is guaranteed, genuine Husqvarna. This is an OEM replacement part sourced directly from the manufacturer.