Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore / Sears Range Hood Damper & Related

Kenmore Plate
Genuine Broan part
By: Broan
Part Number: SR680508

This factory replacement plate provides a rigid, stable mounting surface inside your unit. Replacing a bent or damaged plate helps keep internal components securely positioned and operating smoothly.

  • Supports and locates attached components for correct fit and function
  • Helps maintain alignment to reduce rubbing, vibration, or rattling noises
  • Restores secure mounting when the original plate is bent, cracked, or missing
  • Direct-fit replacement built to match the original footprint
What's included: 1 plate Install notes:
  • Disconnect power at the breaker before servicing
  • Wear cut-resistant gloves; metal edges can be sharp
  • Support attached parts and transfer any brackets or hardware from the old plate
  • Tighten fasteners evenly before restoring power

More
$51.95
Compare At:
$62.34
You Save:
$10.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Damper (Vent Backdraft Flap), Single
Genuine Broan part
By: Broan
Part Number: S97010792

This damper is the vent backdraft flap that opens to let exhaust out and closes to keep outside air and odors from coming back into the appliance. It restores proper airflow control for venting systems. What it does:

  • Opens when the fan runs to allow exhaust to flow through the vent
  • Closes when the fan is off to prevent cold air, smells, and pests from entering
  • Stops rattling or restricted airflow caused by a stuck or damaged flap
  • Works as the airflow control element inside the vent housing or duct
What's included:
  • One damper assembly
Install notes:
  • Disconnect power to the appliance before starting any repair
  • Access the vent or hood housing per the appliance service instructions; removal of grille or access panel may be required
  • Remove the old damper and any mounting hardware; install the new damper in the same orientation
  • Check that the damper moves freely after installation and that duct connections are secure

More
$58.95
Compare At:
$70.15
You Save:
$11.20

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore 7" Duct
Genuine Broan part
By: Broan
Part Number: 407

 

More
$29.40
Compare At:
$30.81
You Save:
$1.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Connector
Genuine Broan part
By: Broan
Part Number: SR740013

 

More
$75.68
Compare At:
$90.06
You Save:
$14.38

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Elbow
Genuine Broan part
By: Broan
Part Number: 418

 

More
$53.50
Compare At:
$60.31
You Save:
$6.81

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Adapter
Genuine Broan part
By: Broan
Part Number: SV13296

 

More
$71.95
Compare At:
$85.62
You Save:
$13.67

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore 7" Elbow
Genuine Broan part
By: Broan
Part Number: 415

 

More
$21.95
Compare At:
$23.47
You Save:
$1.52

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Damper (Vent Flap)
Genuine Broan part
By: Broan
Part Number: 97007237

A replacement damper that helps control airflow through the hood or exhaust duct, preventing backdrafts and improving ventilation performance. Simple swap of a worn or stuck flap restores proper vent operation and airflow control. What it does:

  • Seals the exhaust opening to block outside air and prevent backflow when the fan is off
  • Opens freely with exhaust fan operation to allow proper ventilation
  • Commonly replaces units that are stuck, bent, noisy, or no longer closing fully
  • Helps reduce drafts and unwanted odors entering the home through the duct
What's included:
  • One damper
Install notes:
  • Turn off power to the appliance before accessing the damper to avoid injury
  • Access may require removing the hood cover or grille—use basic hand tools
  • Inspect mounting screws, gaskets, and surrounding ductwork and replace any damaged hardware

More
$9.76
Compare At:
$11.61
You Save:
$1.85

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Unknown
Genuine Broan part
By: Broan
Part Number: 97010029

 

More
$215.73
Compare At:
$222.40
You Save:
$6.67

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Unknown
Genuine Broan part
By: Broan
Part Number: 97010303

 

More
$157.36
Compare At:
$160.64
You Save:
$3.28

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Unknown
Genuine Broan part
By: Broan
Part Number: 97010354

 

More
$173.32
Compare At:
$176.94
You Save:
$3.62

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Unknown
Genuine Broan part
By: Broan
Part Number: 97010355

 

More
$183.95
Compare At:
$187.70
You Save:
$3.75

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Unknown
Genuine Broan part
By: Broan
Part Number: 97010359

 

More
$199.95
Compare At:
$206.04
You Save:
$6.09

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Unknown
Genuine Broan part
By: Broan
Part Number: 97010360

 

More
$215.73
Compare At:
$222.40
You Save:
$6.67

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Chimney Assembly
Genuine Broan part
By: Broan
Part Number: 97011320

 

More
$180.95
Compare At:
$215.23
You Save:
$34.28

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Kenmore Unknown
Genuine Broan part
By: Broan
Part Number: 97013591

 

More
$111.95
Compare At:
$115.36
You Save:
$3.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Keeping your kitchen ventilation in top shape is crucial, and that's where Kenmore / Sears range hood damper & related parts come into play. These parts are essential for ensuring the efficient operation of your range hood, helping to maintain a clear and fresh kitchen environment. A well-functioning damper allows the range hood to expel cooking fumes and smoke effectively, contributing to the overall performance of the appliance.

Kenmore / Sears range hood damper & related parts play a pivotal role in maintaining the functionality of your kitchen ventilation system. They prevent backdrafts, ensuring that air flows in the correct direction, which is vital for the efficiency of your range hood. Using OEM replacement parts, like those from Kenmore and Sears, ensures that you're getting top-quality components that fit perfectly with your appliance. These parts are designed to meet the manufacturer's standards, providing reliability and longevity.

So, whether you're looking to replace a worn-out damper or other related parts, you can be confident in the availability and quality of Kenmore / Sears range hood damper & related components. They help keep your kitchen environment fresh and your range hood performing at its best, making your cooking experience more enjoyable and hassle-free.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store