Kitchenaid Mixer Parts

The Rotating Handle is an OEM part for Whirlpool mixers. It allows you to raise and lower the mixing bowl for convenient access during the mixing process.

A bad rotating handle can be caused by regular use, accidental damage, or excessive force applied during operation. If you notice cracks, a loose or wobbly fit, or difficulty in rotating the handle smoothly, it may indicate a problem with the handle itself.

Symptoms of a bad rotating handle include:

• Cracked or damaged handle surface
• Loose or insecure fit of the handle on the mixer
• Inability to raise or lower the mixing bowl 

Replace your faulty handle with this genuine OEM part to restore your mixer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Stainless Steel Commercial 11 Wire Elliptical WHIP for 7 and 8 Quart Bowl-Lift Stand Mixers. The Elliptical Wire Whip quickly incorporates air into ingredients for fluffy whipped cream, perfect for whipped egg whites added to frostings and cakes. Fits KitchenAid Stand Mixer models KL26M8, KP26M8, KP26M9, KP26N9, KSM7581, KSM7586, KSM7588, KSM7589, KSM7990, KSM8990, KSMC895, 3KSMC895, 4KSM7990, 5KSM7580, 5KSM7581, 5KSM7586, 5KSM7590, 5KSM7591, 5KSM7990, 5KSMC895, 7KSM7586, 9KSM7990, 9KSMC895.

This Coated Spiral Dough Hook for 5 & 6 Quart KitchenAid Bowl-Lift Stand Mixers and KitchenAid Professional 5 Plus Series. The coated Spiral Hook is used to mix and knead yeast dough with ease, saving time and effort of hand kneading. The Dough Hook is dishwasher safe on the top-rack and fits models KP26M1, KV25G, KV25H, KV25M, 3KSM6583, 4KV25H, 5KSM6583, 7KSM6583.

Coated Flat Beater for a KitchenAid Lift Stand Mixer 7 Quart Bowl. The coated flat beater is used for normal to heavy mixtures such as cakes, frostings, cookies and mashed potatoes. The coated flat beater is top-rack dishwasher safe and used with KitchenAid Stand Mixer models KSM7581 and KSM7586.

This dough hook is the kneading attachment designed to mix and develop dough for breads, rolls and other yeast-based recipes. It restores proper kneading action so dough reaches the right consistency without manual work. What it does:

• Replaces a worn or damaged dough hook to restore mixer kneading performance
• Helps mix and develop gluten for consistent dough texture and rise
• Useful when the original hook is bent, stripped, or no longer engaging the mixer
• Fits into the mixer's drive hub and turns dough efficiently for hands-free kneading

• Disconnect power and remove bowls/attachments before installing
• Slide the hook onto the mixer's drive shaft until it locks
• Test at low speed first to ensure proper seating and operation
• Refer to the mixer's manual for cleaning, care and compatible model information

This threaded nut is a genuine fastener used to secure appliance components and restore proper attachment. It replaces worn or missing hardware to stop loose parts and help the appliance function safely. What it does:

• Secures panels, brackets, and assemblies to prevent rattling or movement
• Restores proper thread engagement for stable mechanical connections
• Prevents components from working loose during operation
• Useful when replacing stripped or missing nuts that cause vibration or misalignment

• Disconnect power to the appliance before beginning any repair
• Match nut thread size and type to the mating bolt or stud before installation
• Tighten with the correct socket or wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit

This Coated Flat Beater is perfect for quickly and thoroughly mashing potatoes, mixing cake batter and cookie dough and so much more. The coated flat beater is top-rack dishwasher safe and used with KitchenAid 3.5 Quart Tilt Head models, KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.

The 7 Quart Commercial Stainless Steel Dough Hook can knead yeast dough with ease. This KitchenAid Dough Hook fits 7 and 8 Quart models KSM7588, KSM7589, KSM7990, KSM8990, KSMC895, 3KSMC895, 4KSM7990, 5KSM7580, 5KSM7590, 5KSM7990, 5KSMC895, 9KSM7990, 9KSMC895.

5 Quart Flex Edge Beater For KitchenAid Stand Mixer. The Flex Edge Beater is designed to reduce mixing time when mixing with this beater. The beater features a flexible edge that thoroughly scrapes ingredients from the sides of the bowl and fits KitchenAid Stand Mixer models K45SS, KSM75, KSM95, KSM150PS, KSM152PS and KSM155GB.

Coated Dough Hook for KitchenAid Bowl-Lift Stand Mixer 7 Quart Bowl. The Coated Dough Hook is used to mix and knead yeast dough with ease, saving time and effort of hand kneading. It is dishwasher safe on the top-rack and fits KitchenAid Stand Mixer models KSM7581, KSM7586, 5KSM7581, 5KSM7586, 5KSM7591, 7KSM7586.

A replacement mixer beater that restores proper mixing and whipping action for compatible Whirlpool mixers. Replaces a worn, bent or damaged beater so batters and mixtures combine evenly. What it does:

• Spins to agitate and combine ingredients for mixing, beating and whipping
• Restores performance when original beater is bent, cracked or missing
• Helps eliminate uneven mixing and large lumps in batters or dough
• Works as a direct-fit replacement when the beater shaft and lock engage properly

• Unplug the mixer before removing or installing the beater to avoid injury
• Align the beater shaft with the mixer socket and push in until it locks or clicks
• Test on low speed to ensure proper engagement before full use
• If both beaters are worn on a dual-beater model, replace both to maintain balanced mixing

This dough hook assembly mixes and kneads dough in compatible stand mixers, restoring proper dough handling and consistent mixing performance. It's a direct-replacement part designed to match the original hook's shape and engagement. What it does:

• Kneads and folds dough for bread, pizza and other yeast-based recipes
• Replaces a bent, worn or missing hook that prevents proper mixing
• Restores correct engagement with the mixer's drive for consistent results
• Designed to match OEM fit and function for compatible appliances

• Always unplug the appliance before installing or removing parts
• Remove the bowl and existing attachment, then align and insert the new hook until it locks into place
• Check that the hook spins freely at low speed before use
• Inspect for secure fit and test with a small batch to confirm proper operation