Kitchenaid Range / Cooktop / Oven Grate, Grate Feet, Griddle

This replacement center grate restores stable cookware support on a 36" gas cooktop, helping the cooktop look and perform like new. It fits into the middle burner area and provides a secure, level surface for pots and pans. What it does:

• Supports pots and pans over the center burners for safe, steady cooking
• Replaces cracked, broken, or warped grates that cause instability
• Prevents cookware from rocking or tipping on the cooktop
• Helps maintain proper spacing between cookware and burners for consistent use

• Turn off all burners and allow the cooktop to cool completely before handling
• Remove any surrounding grates and lift the center grate into place; no special tools usually required
• Inspect the grate seat area for damage or debris and clean before installation

The Grate-Kit is an OEM part for Whirlpool cooktops. It includes replacement grates for the oven and broiler that sit above the burner elements. These grates protect the heating elements and allow for food to be easily placed into and removed from the oven cavity. 

Causes of a bad grate kit can include wear and deterioration over time from repeated exposure to high heat, as well as accidents like impact damage or scratches from improper cleaning. 

Symptoms of a bad grate kit include:

• Visible wear and thinning of grates that expose heating elements
• Loose, wobbly, or damaged grates that could fall into the oven
• Discoloration or corrosion
• Difficulty removing or placing food on grates

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace worn or damaged surface grates with this grate kit to restore a sturdy, level cooking surface on your gas range or cooktop. It keeps pots and pans stable over the burners for safer, more consistent cooking.

• Supports cookware above the burners and provides a continuous cooking surface
• Helps keep pots and pans level to prevent rocking or tipping
• Replace if grates are cracked, warped, severely chipped, or missing feet/pads
• Can help address wobbly cookware, unstable placement, or uneven pan contact

• Turn all burners off and allow the cooktop to cool completely before handling grates
• Lift off old grates; clean the cooktop surface and burner caps while accessible
• Position the new grates in the proper locations; ensure all feet sit flat and any alignment features engage
• Test pan stability on each burner before cooking

Replacement burner grate that supports pots and pans on the cooktop, restoring a stable cooking surface and proper burner clearance. Ideal when the original grate is chipped, cracked, warped, or no longer seats cookware securely. What it does:

• Supports cookware directly over the burner so pots and pans sit level for more even heating and safer cooking.
• Replaces damaged or misshapen grates that cause wobbling, uneven cooking, or improper burner alignment.
• Elevates cookware to help maintain proper burner clearance and reduce direct contact with spills.
• Built to withstand high temperatures and everyday use for reliable performance.

• Allow cooktop to cool completely and turn off the gas supply before servicing.
• Most installations are a simple swap: lift out the old grate and set the replacement grate into position.
• Ensure the grate sits flat and is properly aligned over the burner cap before use.

This replacement griddle provides a flat cooking surface for stovetop and range use, restoring even contact for pancakes, bacon, and grilled sandwiches. Designed to match OEM fit and finish for direct replacement. What it does:

• Replaces a worn or damaged range griddle to restore a flat, stable cooking surface
• Enables even heating contact for griddled foods like pancakes and sandwiches
• Helps eliminate hotspots or warped cooking surface symptoms
• Returns proper alignment with the cooktop for safe, stable use

• One replacement griddle

• Remove power to the appliance and allow all surfaces to cool before handling
• Handle with care to avoid scratching the cooking surface; use proper lifting points
• Follow your model's service manual for removal and reinstallation steps
• If hardware or clips are missing from the appliance, obtain OEM fasteners separately

Replacement grate kit for gas cooktops that restores a stable, level cooking surface and improves cookware support. Ideal for replacing cracked, chipped or worn grates so pots and pans sit securely over the burner. What it does:

• Replaces damaged or worn cooktop grates that can cause cookware to wobble
• Restores a flat, stable surface for even cookware contact and safer cooking
• Helps eliminate rattling or shifting grates that interfere with burner use
• Allows burners and cookware to align properly for consistent heat transfer

• Turn off the cooktop and allow all parts to cool completely before handling.
• Wear gloves to protect your hands from sharp edges; handle grates carefully.
• Ensure burners and caps are properly seated after installing the grates; test each burner for correct ignition.

This cooktop grate kit replaces damaged or missing cast-iron grates on compatible gas ranges, restoring stable support for pots and pans and improving safe, even cooking. Fits OEM mounting points for a direct swap. What it does:

• Replaces worn, chipped, or broken cast-iron grates to restore stable cookware support
• Prevents cookware wobble that can cause spills or uneven heating
• Protects the cooktop surface from direct flame contact and wear
• Restores correct clearance and alignment over burners for safer operation

• Disconnect gas supply and/or power to the appliance before beginning work
• Lift old grates straight up; align new grates with burner caps and seating points
• Grates are typically heavy cast iron—use care to avoid dropping and protect surfaces
• Recheck grate alignment and burner cap position

Baking stone, 13" in diameter. For "brick oven" results!