Kitchenaid Range / Cooktop / Oven Touch Pad

This membrane switch in a stainless finish is the touchpad/keypad behind the oven or range control console. It registers your button presses and sends them to the control board to restore reliable input when keys stop responding.

• Provides the touch-sensitive keypad for selecting bake, broil, temperature, timer, and other functions
• Ribbon cable carries keypad signals to the electronic control (clock/oven control)
• Typical symptoms of failure: some or all keys unresponsive, intermittent inputs, unintended beeps, or keypad-related error messages
• A failed keypad can prevent the appliance from starting or accepting commands

• Disconnect power at the breaker before servicing
• Remove the control console/rear cover to access the keypad and control board
• Carefully unplug the ribbon cable; avoid creasing and keep contacts clean
• Align and mount the new membrane, reconnect, reassemble, and test all keys

This genuine OEM replacement part is a switch membrane touchpad made for ovens. The switch membrane touchpad is the plastic display piece on the oven that holds the buttons that control the oven's essential functions. If the touchpad is worn out and the buttons are no longer responding when pushed, it might be time to replace the touchpad. Luckily replacing this part is not a difficult repair.To replace a damaged touchpad, make sure to turn off all power to the oven by unplugging the appliance or shutting off the circuit breaker. After the power to the oven is turned off, take a putty knife to pry off the old touchpad cover. Gently pull it away from the stove's control panel until it comes off. There should be enough adhesive left over to place the new touchpad back to its original place. Be sure to line up the touchpad so that it fits perfectly. This replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand ovens.

This is a switch membrane, also known as a keypad, that is used with ovens, ranges, and stoves. The part is located in the center of the front of the appliance. It is made up of several layers and acts as a switch to turn the appliance on and off. It also includes several buttons so users can choose cooking settings, set temperatures, and otherwise alter the operation of the appliance.Regular use or damage can cause the switch membrane to become damaged. When this occurs, the buttons may not work correctly or there may be no way to turn the appliance on and off. If this is the case with a switch membrane, it should be replaced. Unplug the appliance and remove the screws from the back. Find the tabs on the side and press them to remove the housing. Remove the bottom screws to take off the ribbon connector. Remove the original part and replace it with the OEM replacement component.Created for compatibility with KitchenAid ranges, ovens, and stoves, the switch membrane is sold as a single part. This is an authentic OEM replacement component that is sourced straight from the manufacturer.

This white membrane assembly is the thin keypad/overlay that sits on the appliance control console, restoring tactile button response and sealing the control area from spills and debris. What it does:

• Replaces a worn or damaged keypad membrane so buttons register presses reliably
• Helps restore control panel functionality when buttons are sticky or unresponsive
• Protects the underlying electronics from light moisture and dirt
• Maintains correct alignment and spacing for the console buttons

• One white membrane assembly

• Disconnect power to the appliance before beginning any work
• Remove the console or control housing to access the old membrane; handle the new membrane gently to avoid creases or damage
• Align the membrane carefully with the button openings and the PCB; avoid touching circuit contacts with bare hands
• Reassemble the console and test button operation before finishing; if controls still do not respond, the underlying switch/PCB is functional

This replacement backsplash restores the rear panel that protects the wall behind a freestanding range and gives the appliance a finished appearance. It helps contain splatter and shields wiring and components from spills and debris. What it does:

• Covers the rear opening of the range to protect adjacent walls from grease, steam and food splatter
• Shields wiring and control components located at the back of the appliance
• Restores a clean, finished look when the original panel is dented, rusted or missing
• Helps prevent debris from entering the cabinet and control cavity

• Disconnect power to the range before beginning any work
• Use proper lifting support; a second person may be needed to hold the panel during installation
• Retain and reuse factory screws and fasteners unless replacement hardware is specified
• Handle edges carefully to avoid cuts; align mounting tabs and secure firmly but avoid overtightening

This control panel is the main user interface for the appliance, restoring button and display functions so cycles and settings can be selected and monitored. It delivers a factory-fit replacement to regain reliable control. What it does:

• Replaces a worn, cracked, or unresponsive control panel to restore button and touch operations
• Restores display readouts and control feedback so cycles and options can be selected normally
• Common symptom fix: unresponsive buttons, blank or erratic display, or missing control functions
• Works as the user-facing assembly that connects to the appliance's electronic control system

• One control panel assembly

• Disconnect power to the appliance before starting any repair to avoid shock
• Basic hand tools typically required; remove trim or bezels carefully to access mounting screws
• Label connectors before disconnecting and reconnect securely; avoid forcing plastic clips