Kitchenaid Wall Oven Parts

The Foot Pad Kit for Whirlpool ranges is an OEM part specifically designed to fit underneath the grates. These small but critical components provide cushioning and stability for the grates, preventing them from scratching the cooktop surface and reducing noise and movement during cooking. 

Symptoms of worn or missing Foot Pads include:

• Grates that wobble or shift during use
• Increased noise, such as rattling or scraping, when moving pots and pans
• Scratches or other damage to the cooktop surface beneath the grates
• Uneven cooking surfaces which can affect the stability of cookware

Causes of degradation in foot pads can include high heat exposure, frequent cleaning that wears down the material, or the natural breakdown of rubber or silicone over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Burner Grate Insert is an OEM part for Whirlpool stoves. It provides a stable and heat-resistant surface for cookware, ensuring even heat distribution while cooking. The grate measures approximately 9" x 11". 

You should replace the burner grate insert if it becomes damaged or worn out. Causes of a bad burner grate insert can include prolonged exposure to high heat, accidental impact, or regular wear and tear. These issues can compromise its stability and heat resistance, affecting cooking performance.

Symptoms of a bad burner grate insert include:

• Uneven or unstable cooking surface
• Visible cracks or chips
• Difficulty in placing or balancing pots and pans
• Discoloration or warping

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a replacement surface grate kit for select gas cooktops and ranges. It restores a stable, level cooking surface when the original grates are worn, cracked, or discolored, helping cookware sit securely over the burners.

• Supports pots and pans over the surface burners for proper heating
• Provides a stable, level cooking platform to reduce rocking or wobble
• Common replacement for cracked, chipped, warped, or heavily discolored grates
• Helps when grates no longer sit flat or align properly on the cooktop

• Turn all burners off and allow the appliance to cool completely before handling grates
• Lift off and remove old grates; clean the cooktop surface around the burner area
• Set new grates in place, aligning feet/locator tabs so they sit flat and secure
• Verify burner caps are seated correctly and cookware sits level before use

The Burner Grate is an OEM part for Whirlpool ranges. It sits atop the gas burner to safely support cookware during food preparation. The heavy-duty grate is manufactured to withstand continuous daily usage without warping or developing hot spots that could impact cooking. 

Causes of a bad burner grate can include normal wear and tear from years of use, inadvertent impact damage from cookware being placed on the range, or heat-related defects developing over time.

Symptoms of a bad grate include:

• Protruding or missing grate support wires or bars
• Excessive scorching or charring of food residues on grate surfaces  
• Difficulty keeping pots and pans balanced and centered during cooking
• Grate edges becoming raised or misshapen from the burner cavities

Compatible with brands including Maytag, Jenn-Air, Amana, and some Kenmore models.
 

This replacement griddle creates a flat, stable cooking surface on your range or cooktop. It sits on the designated grate area over the burner(s) to restore safe, even griddle cooking when the original is missing or damaged.

• Provides a flat griddle surface by resting on the designated grate/burner area
• Helps distribute heat across the cooking surface
• Restore safe operation when the original is cracked, warped, chipped, or missing
• Common signs to replace: rocking/unstable surface, visible damage, or the griddle no longer seats properly on the grate

• Turn off all burners and allow the appliance to cool completely before handling
• Remove the standard grate(s) from the griddle location
• Set the griddle on the designated grate area and ensure it is fully seated and stable over the burner(s)
• Preheat gradually and follow your Use & Care Guide for operation and cleaning

This replacement griddle sits over your range or cooktop burners to provide a flat, removable cooking surface. Use it to restore a level cooking area when the original is worn, damaged, or missing.

• Creates a flat cooking surface above the burner(s) for items like pancakes and sandwiches
• Helps distribute heat from the burner across the plate for more even contact
• Replace if cracked, warped, chipped, or heavily worn
• Common signs include rocking or poor fit, visible damage, or a degraded cooking surface

• Turn off all burners and allow the cooktop and griddle to cool completely before handling
• Position on the designated grate or locator tabs per your model's orientation
• Follow care and cleaning guidance in your owner's manual

The Burner Grate is an OEM part for Whirlpool ranges and cooktops. This grate provides a stable surface for pots and pans, ensuring even heating and secure placement during cooking.

Causes of a bad burner grate can include exposure to high heat, which can cause warping or discoloration, physical damage such as chips or cracks from heavy cookware or accidental drops, and general wear and tear over time. These issues can affect the grate's stability and the cooking performance.

Symptoms of a bad burner grate include:

• Warping or bending
• Visible cracks or chips
• Uneven cooking surfaces
• Pots and pans wobbling or not sitting securely

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement grill grate restores a sturdy, level grilling surface on your cooktop or range. Replace a cracked, warped, or missing grate to maintain safe support and consistent heat over the grill area.

• Provides the elevated grilling surface above the heat source for stable, even cooking
• Keeps food positioned at the proper height for consistent searing and results
• Replace if cracked, broken, warped, or heavily corroded
• Helps resolve rocking/unstable surface or uneven cooking caused by a damaged grate

• Turn appliance off and allow all surfaces to cool completely before handling
• Lift off the old grate and clean debris from the support ledges or frame
• Set the new grate in the correct orientation; ensure it sits flat and stable
• Verify proper clearance around adjacent components before use

The burner grate is an OEM part for Whirlpool gas ranges. This grill component sits above the burners to provide an elevated grilling and warming surface. 

Causes of a bad burner grate can include warping or damage from high heat over time, worn or broken tie bars allowing unstable movement, or surface deterioration that makes normal cooking unsafe.

Symptoms of a bad burner grate include: 

• Wobbly or loose resting above the burners
• Pits, sharp edges, or thin spots on the grilling surface  
• Rust or deterioration of structural integrity
• Difficulty removing or installing due to tie bar issues

This OEM part fits select Whirlpool, Maytag, KitchenAid, Jenn-Air,  and Amana models.

The Burner Grate is an OEM part for Whirlpool ranges and cooktops. This grate sits atop of gas or burners, providing an even heat distribution surface for cooking pots and pans.

Causes of a bad burner grate can include warping or melting from exposure to excessive heat, damage from scratches or impact, or corrosion over time.

Symptoms of a bad burner grate include:

• Uneven or inefficient heat transfer to cookware
• Hot spots or cool spots on the cooking surface
• Damage, warping or breakage of the grate material

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This griddle creates a flat, continuous cooking surface that rests on your range or cooktop grates. It adds versatile space for items like pancakes and sandwiches, and replaces a worn or missing original griddle to restore safe use. What it does:

• Provides a broad, flat surface across burners for griddle-style cooking
• Direct replacement for a damaged, warped, or missing griddle
• Useful for foods that need a continuous surface (pancakes, eggs, grilled sandwiches)
• Common reasons to replace: wobbling/poor fit on grates, cracks, or persistent sticking from wear

• 1 griddle

• Turn all burners off and let the cooktop cool before placing or removing the griddle
• Position per your model's instructions so it sits flat and secure on the grates
• Preheat gradually on low to medium heat; handle only with oven mitts
• Allow the griddle to cool completely before cleaning or moving

This grate kit replaces damaged or missing cooktop grates to restore a stable cooking surface and proper cookware support. Designed to fit and align with the range burners for safer, more even heating. What it does

• Replaces cracked, chipped, warped, or missing grates that prevent cookware from sitting level
• Restores proper burner alignment and stability for pots and pans
• Helps reduce burner interference caused by damaged grate surfaces
• Matches OEM fit and mounting points for straightforward replacement

• Grate kit as shown

• Turn off the appliance and ensure the cooktop and burners are completely cool before starting
• Remove existing grates and clean the cooktop before fitting the new parts
• Set grates into place by aligning with burner supports; no special tools typically required

This cooktop grate kit replaces damaged or missing cast-iron grates on compatible gas ranges, restoring stable support for pots and pans and improving safe, even cooking. Fits OEM mounting points for a direct swap. What it does:

• Replaces worn, chipped, or broken cast-iron grates to restore stable cookware support
• Prevents cookware wobble that can cause spills or uneven heating
• Protects the cooktop surface from direct flame contact and wear
• Restores correct clearance and alignment over burners for safer operation

• Disconnect gas supply and/or power to the appliance before beginning work
• Lift old grates straight up; align new grates with burner caps and seating points
• Grates are typically heavy cast iron—use care to avoid dropping and protect surfaces
• Recheck grate alignment and burner cap position

This wok ring is a burner accessory that stabilizes round-bottom woks on gas range grates, letting you use wok-style cookware safely and maintain even heating. Durable design keeps cookware centered over the flame. What it does:

• Supports round-bottom woks and small, curved cookware on a gas burner
• Helps keep cookware stable to prevent tipping and uneven cooking
• Places the wok closer to the flame for improved heat contact
• Fits into the burner grate without tools for simple placement

• Install only on a compatible gas range grate; ensure the range is off and cool before placing the ring
• Position the ring securely in the grate recess so the wok sits level over the burner
• Inspect for cracks or warping; replace if damaged to avoid instability

The Burner Grate is an OEM replacement part for GE gas cooktops. It is a crucial component that sits on top of the cooktop surface, providing a stable and durable platform for placing cookware directly over the gas burners. The burner grate is typically made of cast iron or enameled steel, ensuring durability and resistance to high temperatures.

Symptoms of a bad Burner Grate include:

• Excessive wear or warping, causing instability or rocking of cookware
• Cracks, chips, or missing sections of the grate
• Discoloration or rust buildup due to prolonged exposure to heat and spills

Causes of a bad burner grate can include repeated exposure to high heat, accidental drops or impacts, improper cleaning methods, or general wear over time. Spills or food debris left on the grate can also contribute to accelerated deterioration.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas cooktop models.

This replacement center grate restores stable cookware support on a 36" gas cooktop, helping the cooktop look and perform like new. It fits into the middle burner area and provides a secure, level surface for pots and pans. What it does:

• Supports pots and pans over the center burners for safe, steady cooking
• Replaces cracked, broken, or warped grates that cause instability
• Prevents cookware from rocking or tipping on the cooktop
• Helps maintain proper spacing between cookware and burners for consistent use

• Turn off all burners and allow the cooktop to cool completely before handling
• Remove any surrounding grates and lift the center grate into place; no special tools usually required
• Inspect the grate seat area for damage or debris and clean before installation