Kmart Edger Parts

This is a trimmer head used with string trimmers, weed wackers, and edgers. When in use, it rotates, cutting grass. If the trimmer head stops rotating or cutting grass, it is time to order a replacement part. In order to complete the replacement process for trimmer heads, the user will need to pry the trimmer head off of the trimmer. Use a flathead screwdriver to loosen it. After pulling the old trimmer head off the nut on the bottom of the shaft, insert this replacement head onto the trimmer shaft.This trimmer head is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

This spark arrestor is a genuine MTD part. It is a replacement part for lawn mowers, log splitters, and walk-behind mowers. The spark arrestor is an important safety feature, and it is illegal to sell or operate a machine without one.This part arrests or extinguishes sparks that are created by the engine and other components while the mower is in use. It prevents fires, and mowers should never be used without one.This spark arrestor is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, MasterCut, Bolens, Cub Cadet, Husky, MTD, Troy-Bilt, and Yard-Man.

This is a muffler assembly that is used with many types of lawn and garden equipment from major manufacturers. The part is connected to the exhaust tube and is tasked with reducing the noise made by the exhaust. As time goes on, the muffler assembly can start to become damaged or malfunction and may need to be replaced. When replacing the muffler assembly, make sure the spark plug is removed and the equipment is powered off. It should be placed on a stable surface during the replacement process. Take the bolts out of the muffler and remove them from the engine. Take the bolts from earlier and install them into the replacement muffler. Install the gaskets, heat shield, and other parts before placing the new muffler into the lawn equipment. Reassemble all parts before using the tool.The muffler assembly is an authentic OEM replacement part that is directly sourced from the manufacturer. It is made to be used with lawnmowers, tillers, leaf blowers, log splitters, and wood chippers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, MTD, and Yard Machines. This component is sold as an individual item.