Kmart Lawn Mower Parts

Rear deflector shield for walk-behind mowers. Mounts to the deck to prevent grass from expelling rearward. Replace if cracked, broken, or missing.

Replace your lawn tractor's deck brake rod if mowing deck won't stop spinning or brake feels loose. Direct-fit part restores safe deck engagement control.

Steering drag link for front-engine lawn tractors. Connects steering components to control wheel direction. Replace if bent, worn, or damaged.

This carburetor O-ring creates an airtight seal between carburetor components to prevent fuel and air leaks in small engines. It maintains proper fuel mixture and prevents contamination that could affect engine performance. Replace it when you notice fuel leaks around the carburetor, poor engine performance, or difficulty starting your equipment.

Shoulder bolt for riding mowers and lawn tractors. Used as an axle for wheels and deck components. Replace if bent, worn, or stripped from regular use.

Hex flange bearing supports rotating shafts in riding mowers and tractors. Replace when you notice grinding noise or rough rotation. Verify fit with your model.

Reverse drive belt for rear-tine tillers. Replace if worn, cracked, or slipping during reverse operation. Verify compatibility with your tiller model.

This V-belt is a genuine MTD part, sold individually. This V-belt can be used as a replacement part for lawnmowers. The v-belt of a lawn mower is operated by a network of pulleys that work in conjunction to turn the belt powered by the engine. The purpose of the V-belt for a lawnmower is to rotate the lawnmower blades.A V-belt might suffer damage that can stop the belt from helping the lawn mower blades to rotate and mow effectively. Symptoms of a damaged v-belt can include visible cracks, deterioration, or erosion, or visible damage to the side wall. If any of these symptoms are attributable to a malfunctioning or damaged V-belt, the component should be removed and replaced with this genuine OEM replacement part before operating the lawn mower again. Remember to wear gloves when handling, repairing, and using outdoor equipment.This is an OEM part sourced directly from the manufacturer, and it is sold individually. This V-belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard-Man, and MasterCut.

Deck brake assembly stops mower blades safely when disengaged. Fixes blades that won't stop spinning or take too long to halt. Moderate DIY repair.

Steering wheel for riding mowers and lawn tractors. Mounts to the steering shaft to control direction. Replace if cracked, broken, or missing.

Complete discharge chute assembly for lawn tractors. Directs grass clippings away from mower deck. Replace if cracked, broken, or missing components.

Replacement 8-inch wheel assembly for self-propelled walk-behind mowers. Installs on rear or front axle. Needed when original wheel is cracked or worn.

Front right axle assembly for lawn tractors. Mounts to the front of your riding mower. Replace if bent, damaged, or broken from impact or wear.

The shoulder screw is used in places where a spacer or bearing surface is needed, since the top half of the screw is unthreaded. These fasteners are often used for guides, pivot points, mounting pins, axles, and even a shaft for bearings and bushings in various MTD engines. With regular use, the screws can wear down or be lost. Always repair the missing hardware promptly with genuine OEM replacements. Disengage the spark plug and wear gloves when performing work on engines for safety. This genuine OEM replacement shoulder screw has been designed to be compatible with machines from MTD, Troy-Bilt, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Craftsman. It can be used for multiple applications and in multiple locations in different models of lawnmowers, tractors, and chippers that use the screw in various applications. Check your parts diagrams for the exact location and use of these screws before ordering. This is sold as an individual unit; order multiple quantities as needed.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.