Need Help?
Call or text
The Oven Ignitor is an OEM replacement part for LG ovens. It is a critical component responsible for igniting the gas burners or heating elements within the oven, allowing it to reach and maintain the desired cooking temperatures.
Symptoms of a bad oven ignitor include:
Causes of an oven ignitor failure can range from general wear and tear over time, to electrical or mechanical malfunctions, to obstructions or buildup preventing proper ignition. This OEM LG part is also compatible with Sears/Kenmore models.
We were getting an intermittent F19 code on our lower oven mainly. This code gets triggered when the oven fails to heat up to a minimum temperature within a specific amount of time. I figured this was being caused by an ignition failure so I bought this new ignitor. As it turns out, if you have a double oven then you will have two ignitors. Just keep that in mind in case you are thinking about replacing both or you are seeing errors in both ovens. The ignitor in the lower oven is located below... Read more
The Magnetron Thermostat is an OEM part for LG microwaves and built-in ranges. Its primary function is to monitor the temperature and ensure that it remains within a safe operating range. If the temperature exceeds the preset limit, the thermostat will interrupt the power supply to the magnetron, preventing overheating and potential damage.
Causes of a faulty magnetron thermostat can include electrical malfunctions, component failures, or physical damage. These factors can result in issues such as erratic heating, microwave not heating properly, or the appliance shutting off unexpectedly.
Symptoms of a bad magnetron thermostat may include:
This OEM LG part can also be used on Kenmore/Sears appliances.
Did some Google searches and most comments concerning this issue on LG stoves indicated the high temperature thermostat malfunctions when using the self cleaning function. This malfunction causes complete loss of power for the entire stove and locks the oven door. Since I wasn't completely sure if it was the thermostat or where it was for that matter, I called a service tech to troubleshoot the stove. He was able to determine it was the thermostat and further tested his findings by... Read more
The Oven Selector Knob Supporter is an OEM replacement part for LG ovens. It is a crucial component that provides structural support and ensures proper functioning of the oven selector knob mechanism.
Symptoms of a bad oven selector knob supporter:
Causes of a faulty oven selector knob supporter can include physical damage, wear and tear over time, or manufacturing defects that compromise its structural integrity or alignment.
This OEM LG part is also compatible with Sears/Kenmore ovens.
Replaced the cheap plastic lever supporter with another LG OEM cheap plastic lever supporter. I should have bought two as I can see this problem happening again. Job was a simple fix and only required a Phillips head screwdriver. I did not need to remove any connections as there was enough room and wire to pull out the oven control assembly and make the repair. One word of caution is to be careful as the sheet metal internal cover and bottom of the control knob panel is razor... Read more
The Burner Knob Assembly is an OEM replacement part specific to LG gas ranges and cooktops. It refers to the assembly that includes the control knob and stem that adjusts burner flame levels on the stovetop. Causes of a bad burner knob assembly can include wear from frequent use that results in hard-to-turn or unstable knobs. Overheating from pans placed directly on the knob could also warp and damage plastic components. Symptoms of a bad burner knob assembly include:
This genuine LG replacement part is compatible with specific Sears/Kenmore brand models.
I spoke with an associate of this company and she worked with me in finding the proper knob for the stove. I received it within 2 days and the knob fixed perfect. Thanks to the person who helped me.. Read more
The Motor, AC Fan is an OEM part for LG ovens. This fan motor is responsible for circulating air within the oven cavity, ensuring even heat distribution for consistent cooking and baking results. It helps maintain the oven’s temperature by moving hot air around, which is especially important for convection ovens.
Over time, the fan motor can wear out or become faulty due to continuous use, exposure to high temperatures, or electrical issues. When the fan motor fails, it can lead to uneven cooking and potential overheating of the oven.
Symptoms of a bad oven motor, AC fan include:
This OEM LG part is also compatible with Sears/Kenmore models.
Took it apart and replaced it. Read more
The Interlock Door Switch is an OEM part for LG microwaves. It is a safety component located on the door of the microwave designed to prevent the microwave from operating unless the door is securely closed. The interlock door switch works with the microwave's electronic control board to sense when the door is open or closed and allow or disallow operation accordingly. Causes of a bad interlock door switch can include normal wear and tear from repeated opening and closing of the microwave door over time. Symptoms of a bad interlock door switch include:
This OEM LG part is also compatible with some Sears/Kenmore microwaves.
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more
Replacement window glass that restores a clear viewing area in the appliance door and helps maintain a clean, sealed surface. Ideal for replacing cracked, chipped, or cloudy glass to improve visibility and safety. What it does:
It would not be fixed if not for Appliance Pro. I ordered the glass to replace and it arrived the next day. Removed old glass and put in the new. Easy! Thank you Appliace Pro!! I have already recommended you to others. Read more
The PCB Assembly is an OEM component for LG ranges. It is the circuit board responsible for controlling critical range functions such as the oven, cooking elements, and display.
Symptoms of a bad PCB assembly can include:
Causes of a bad circuit board tend to be normal wear and tear over time from heavy usage and heat exposure during cooking. Occasional power surges or fluctuations can also potentially cause circuit damage.
This OEM LG part is also compatible with Sears/Kenmore.
We ordered the Pwb(pcb) Assembly,sub, Part Number 6871W1N012B & received the part the next day. I couldn't believe how fast. My husband was able to replace in 15 minutes. My oven worked again! Read more
The Bake Element is an OEM part for LG ranges. This part provides the necessary heat for baking by distributing heat evenly from the bottom of the oven cavity.
Causes of a bad bake element can include normal wear and tear over time, exposure to high heat leading to deterioration, or electrical issues causing the element to short out.
Symptoms of a bad bake element include:
This OEM LG part is also compatible with some Kenmore models.
Pulled up you tube, watched video, ordered part, and installed. No problems Read more
The Thermostat is an OEM part for LG wall ovens. It is a temperature-sensitive cut-off switch located near the oven's heating elements that monitors interior temperatures and prevents overheating within the appliance. Causes of a bad safety thermostat can be related to prolonged exposure to excessive heat inside the oven cavity, defects in the thermostat's microchip or coil components, or damage from corrosion or physical impact over time. Symptoms of a failed hi-limit thermostat include:
Looked online. Others said to start with the thermostat because its cheap and easy to fix, so I did. The thermostat is located at the rear of the oven on the back. You need to remove a total of 3 panels to get to it. Do not confuse it with the thermal sensor at the rear of the oven on top. My thermostat was clearly deformed, and I had never run a self clean like other with testify to. Simply replace it - easy. Oven worked like new. Read more
The Convection Fan Motor is an OEM component for LG stove tops and ranges. It refers to the small electric motors used within certain LG gas or electric range models.
Causes of a faulty cooking range motor include normal wear from years of operation in high-heat environments. Grease and food deposits can also impair motor performance over time.
Symptoms of a bad motor include:
Replaced motor. Read more
The Oven Relay Board is an OEM part for LG ranges. This board functions as a hub for electrical signals, directing power to various components of the oven, such as the heating elements, convection fan, and control panel, based on the selected cooking functions.
Causes of a bad Oven Relay Board can stem from electrical surges that damage the board's components, physical damage during cleaning or servicing, or natural wear and tear over time that degrades the board's electrical pathways.
Symptoms of a bad Oven Relay Board include:
Had an appliance repair co. come out to look @ problem.They were here very briefly & left saying they would give an estimate . #days later I had to call to get the estimate $480.00 . I wasn't happy about that. My wife said that the repairman just pulled out the stove & looked @ a sheet of paper that was behind the stove. I pulled out the stove & got the paper out & read the code problem, took a couple of measurements with a ohmmeter & with your help & reference ,ordered the correct PCB board &... Read more
The Knob Assembly is an OEM part for LG ranges. This knob assembly is used to control the temperature and settings of the range's burners. It ensures that you can easily adjust the heat levels to achieve precise cooking results. Causes of a bad knob assembly can include wear and tear from regular use, accidental damage such as cracks or breaks, or exposure to excessive heat that can warp or deform the knob. Symptoms of a bad Knob Assembly include:
We just bought a home and the LG stove top was in pretty good condition besides not having any writing on the knobs. This made it difficult to know the proper settings when cooking food. So after one week of fooling with it, I looked up the parts and fortunately, AppliancePartsPros.com had the knobs in stock. Read more
The Encoder Board is an OEM part for LG ovens. This board is responsible for interpreting the inputs from the control knobs and buttons on the oven's control panel. It sends these signals to the main control board, which then adjusts the oven settings accordingly, such as temperature and cooking mode.
Causes of a bad encoder board can include electrical surges, wear and tear from frequent use, or physical damage to the board's components. A malfunctioning encoder board can disrupt the communication between the user interface and the oven's control system.
Symptoms of a bad encoder board include:
This foot is a small rubber base pad that supports and stabilizes the appliance on the countertop or cabinet surface. Replacing a worn or missing foot helps keep the unit level and reduces vibration and slipping.
Ordered replacement parts and were better than the OEM that was on the range. Read more
This main electronic control board (PCB assembly) manages and coordinates your appliance's functions. Replacing a failed board can restore reliable power distribution and control of motors, valves, and other components, helping resolve no-power and erratic-operation issues.