Paul B San Diego , CA January 30, 2017 Appliance: LG Washer WM2077CW Little black specks in the dispenser tray calicum build up and rusted clamps on rear of dispenser I figured after 10.5 years that it might be time to replace the dispenser hoses because I was noticing black stuff in the dispenser trays. I replaced two or the four hoses and clamps on the far left side and for good measure the hot water inlet valve. The inlet valve was okay but the screen had all kinds of crap in there that I couldn't clean out so now I have an extra solenoid just in case one of the others fails. While I was at it I removed the dispenser and cleaned the calcium build up on the outside and replace both the water inlet hoses with steel braided. Tip: I used some food grade lubricant sealant from my kegging stuff on the hoses ends and washers to help with sealing. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Mark M San Antonio , TX November 21, 2016 Inlet hose that filled the dispenser popped off and the inlet valve was all corroded. Bought the inlet valve and hose I was really happy @ the shipping it came super fast. THANK YOU!!! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Joseph L Mendon , NY October 10, 2023 Broken drain hose. IT WAS AN EASY FIX. PULL WASHER AWAY FROM WALL TO ACCESS THE BACK. REMOVE SCREWS FROM METAL PLATE. UNSCREW HOSE CLAMP. REPLACE HOSE. HOOK TO DRAIN. VERY SIMPLE! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Noel U Brighton , MI September 30, 2016 Appliance: LG Washer WM2101HW Fe and pe water leaking Watched the video on your website and fixed the problem with no trouble. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
James N San Antonio , TX March 14, 2014 Appliance: Model LG WM2101HW The old inlet hose from the control valve to the dispenser was not staying attached anymore when under pressur. This hose is easily reached with the top of the washer removed, and very simple to replace. I could have reused the existing spring clamps, but I was glad to see that the new hose included a pair. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers