Kenmore Washer 796.40021900 (79640021900, 796 40021900) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
Do-It-Yourself Stories from Customers like You
Broken spider assembly; aka washer drum shaft assembly Jeff J. • Los Angeles , CA • November 01, 2015
I followed Matt's awesome video from AppliancePartsPros.com to build up my "I can do this" reserves. But here's the story leading up to that point...
We purchased our Samsung WF419 on a “Black Friday” special November 2009 expecting to get some good years out of the washer/dryer pair. We don’t run more than 2 or 3 loads a week in the washer, so ours has had relatively little use over the beginning of its anticipated and expected long life-cycle. When the “thumping” started on the spin cycle a...
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: 5220FR2006H
The Water Inlet Valve Assembly is an OEM replacement part for LG washing machines, designed to control the flow of water into the laundry tub. This part is responsible for opening and closing to allow water into the wash drum at the appropriate times during the wash cycle, providing the correct water level and temperature.
Causes of a bad Water Inlet Valve Assembly can include mineral deposits blocking the valve, electrical failure preventing the valve from opening or closing properly, or physical damage to the valve mechanism itself.
Symptoms of a bad Water Inlet Valve Assembly include:
- Inadequate filling of the washer drum
- Water entering the drum when the washer is off
- Unusual noises during the fill cycle
- Water that is too hot or too cold, indicating a failure in valve operation that controls temperature
This OEM LG part can also be used on Kenmore/Sears appliances.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
-
Shuts off too soon
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg Bruce S. • Van Nuys , CA • December 13, 2015
Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward;
requires : 1 phillips screwdriver ~#2
1 needlenose plier, medium size
1 channel lock plier, medium size
1 marker pen
1 - cold water valve assembly # AP4445613
1 - hot water valve assembly #AP4441935
1 - water level pressure switch #AP4440713
an old towel or two for absorbing small amounts of water
a cellphone / camera for making sure you have the...
Read more
More
$48.44
- Compare At:
-
$59.79
- You Save:
-
$11.35
Genuine Lg part
By: Lg
Part Number: EBF49827801
The Washer Door Lock Switch is an OEM part for LG washing machines. This critical safety feature locks the washer door during operation to prevent it from being opened, which ensures safety and proper functioning. The door lock switch also communicates with the washer's control system to indicate that the door is securely closed and the machine can begin its cycle.
Symptoms of a bad Washer Door Lock Switch include:
- The washing machine refusing to start, despite the door appearing to be closed.
- The door failing to lock properly, or the lock releasing prematurely during a cycle.
- Error messages on the washer's display related to door closure issues.
Causes of a bad door lock switch can include mechanical failures such as worn or damaged locking mechanisms, electrical issues like faulty wiring or failed solenoids, or alignment problems that prevent the door from engaging the switch properly.
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Lid or door won't close
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
E0 code replaced drain pump and circulating motor the door switch assembly was separate issue. Ann M. • Coral Springs , FL • May 09, 2020
Superfast parts delivery. Got packages by the second day. Videos were extremely helpful and well done; we couldn't have done without them although we came across slight differences in our machine and found workarounds. Our machine did not drain the water so I drained the water manually via drain tube at bottom of the machine and checked the filter for blockage. All clear so I read articles on the internet and watched videos and took a chance on replacing the drain pump and circulating motor...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Lg part
By: Lg
Part Number: 5215ER2002G
The Drain Hose Assembly is an OEM part for LG washing machines. It is a component designed to transport used water from the washer to the drain. This flexible hose assembly ensures that water flows smoothly out of your washing machine after each cycle, preventing leaks and maintaining the efficiency of your appliance.
Causes for replacement can include wear and tear over time, clogs from lint or small items, kinks that restrict water flow, or damage from moving or improper installation.
Symptoms of a bad Drain Hose Assembly include:
- Water leaking from the back or bottom of the washing machine
- Difficulty draining water out of the washer
- Puddles of water forming around the appliance during or after operation
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drain hose was leaking on my lg washing machine Terry O. • Temecula , CA • June 12, 2014
I found a video, by another parts vendor, that showed in detail how to dismantle and repair the washer. I wouldn't have known how to even get to the problem without that repair video. Dismantling the washer was easy once I knew how, but would have been like a (litteral) Chinese puzzle without the video. Once I had cracked open the machine and identified the problem, the repair was easy.
I ordered from Appliance Parts Pros because they offered next-day delivery of parts. I had the washer back...
Read more
More
$34.54
- Compare At:
-
$41.10
- You Save:
-
$6.56
Genuine Lg part
By: Lg
Part Number: 3108ER1001B
The Pump Casing is an OEM replacement part for LG washing machines. It is a crucial component that houses the drain pump, which is responsible for removing water from the wash tub during the drain and spin cycles.
Symptoms of a need to replace the pump casing:
- Leaks or water seeping from the pump area
- Unusual noises or vibrations during the drain or spin cycles
- Pump failure or inability to drain water effectively
- Cracks or damage to the casing itself
Causes of a faulty pump casing can include physical impact or mishandling, excessive wear and tear over time, or potential manufacturing defects.
This OEM LG part is also compatible with Sears/Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
My lg washer quit draining and was showing error code oe Dan C. • Demotte , IN • June 05, 2016
I took it apart and found the drain pump motor had come apart. I found appliancepartspros.com and read the reviews for this company. Customers were very satisfied with the parts and service. I ordered the parts (at a savings of over 30% from my local appliance store) and had them in 2 days (YES TWO DAYS). Totally excellent service. Put the washer back together and it works like new. The repair was very easy to do myself and saved me well over $100. I recommend your company to every do it...
Read more
More
$37.58
- Compare At:
-
$44.34
- You Save:
-
$6.76
Genuine Lg part
By: Lg
Part Number: 2W20017E
The Outer Door Gasket Clamp is an OEM part for LG washing machines. It is designed to secure the outer door gasket, ensuring a tight seal between the door and the drum. This helps prevent water leaks during the wash cycle and maintains the efficiency of the washing machine.
Causes of a bad outer door gasket clamp can include regular wear and tear, damage from heavy use, or corrosion over time. A compromised clamp can lead to a loose gasket, resulting in water leaks and reduced washing machine performance.
Symptoms of a bad Outer Door Gasket Clamp include:
- Water leaking from the door area during wash cycles
- A loose or misaligned door gasket
- Difficulty in securing the door properly
- Visible rust or damage on the clamp
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Washer basket was loose banging/knocking when running eventually gave a 'load out of balance code" Dwayne D. • Hopewell Junction , NY • September 29, 2014
The repair was fairly straight foward as shown in the video. However, driving the shaft from the bearings took some doing. It required replacing the use of the board with a spare bolt and a 2lb hand sledge. (having an air hammer as reserve, also not a bad idea) I rated this reair as a "1" however I've been an auto mechanic for 40 years. If you do not have good general mechanical ablities you may find this more challenging as you get it further apart. I suggest anyone making this repair should...
Read more
More
$20.62
- Compare At:
-
$24.54
- You Save:
-
$3.92
Genuine Lg part
By: Lg
Part Number: 383EER2001A
The Pump Filter Assembly is an OEM replacement part for LG washing machines. It is a crucial component that filters out lint, debris, and other particles from the wash water, preventing them from recirculating and damaging the pump or other internal components.
Symptoms of a need to replace the pump filter assembly:
- Clogging or blockages, leading to poor drainage or water not draining completely
- Excessive buildup of lint, hair, or other debris in the filter screen
- Leaks or water seeping from the filter housing or surrounding area
- Unusual noises or vibrations during the drain or spin cycles, indicating a potential blockage
Causes of a faulty pump filter assembly can include excessive lint accumulation, damage to the filter screen or housing due to impact or mishandling, and general wear and tear over time.
This OEM LG part is also compatible with Sears/Kenmore washing machines.
Do-It-Yourself Stories from Customers like You
Water was leaking around the filter cap on our lg front loading washer and flooded our laundry room John C. • The Villages , FL • May 12, 2015
Unscrewed the leaking filter and replaced with the new one. End of problem. Great service and prices at Appliance Parts Pros.com. This will be the first place I check whenever I need repair parts for any of our appliances in the future.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: 5214FR4006G
The Drain Hose is an OEM part for LG washing machines. It is designed to carry used water from the washing machine to the household drain. This hose ensures that water is efficiently expelled from the washer, preventing any overflow or leakage issues.
Causes of a bad drain hose can include cracks or splits due to wear and tear, clogs from debris or residue buildup, and damage from mishandling or improper installation. Such issues can compromise the hose's ability to transport water effectively.
Symptoms of a bad Drain Hose include:
- Water leaks during or after the wash cycle
- The washer not draining properly
- Visible cracks or damage to the hose
- Unpleasant odors due to trapped debris or standing water
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
There was a hole in the tube to pump hose Gary M. • Watkinsville , GA • June 28, 2016
I replaced the Tube to pump hose which was very easy. I just tilted the washer on it side and replaced the Hose.
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Lg part
By: Lg
Part Number: 3891ER2003A
The Detergent Box Assembly is an OEM replacement part for LG washing machines. This assembly is responsible for holding and dispensing detergent and other laundry additives during the wash cycle. It ensures that the correct amounts of detergent, bleach, and fabric softener are released at the appropriate times, contributing to effective cleaning and care of your clothes.
Over time, the detergent box assembly can become worn out or damaged due to continuous exposure to water and detergent. Buildup of detergent residues can clog the compartments, and the mechanical parts of the assembly can also degrade.
Symptoms of a bad detergent box assembly include:
- The detergent, bleach, or fabric softener not dispensing properly
- Visible cracks, warping, or damage to the box
- Residues remaining in the compartments after a wash cycle
- Leaks from the detergent box area
- Error messages related to dispensing issues
This OEM LG part is also compatible with some Sears/Kenmore washing machine models.
Do-It-Yourself Stories from Customers like You
The problem was the drawer would get caught inside the dispenser assembly the top of the dispenser assembly had started to droop down catching the drawer Danny A. • Bedford , TX • December 26, 2014
I replaced the dispenser assembly and since this was being replaced, I installed a new drawer and detergent box assembly.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: FAA31690705
Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.
What it does
- Locks the tub and basket to limit movement in transit
- Helps prevent suspension damage and internal rattles while relocating
- Replaces missing, bent, or stripped transport bolts
- Useful for moves, storage, or service shipments
What’s included
One shipping bolt assembly (sold individually).
Install notes
- Unplug power and turn off water before service
- Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
- Do not operate the washer with shipping bolts installed; remove all bolts after placement
- Some models use multiple bolts and lengths—match count/positions to your owner’s manual
Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.
Do-It-Yourself Stories from Customers like You
The case of the missing shipping bolts Joshua D. • Las Cruces , NM • May 03, 2019
AppliancePartsPros had the needed items in stock, and I had them within 48 hours of the parts being shipped.
Read more
More
$37.58
- Compare At:
-
$44.72
- You Save:
-
$7.14
Genuine Lg part
By: Lg
Part Number: 4861ER2001D
The Inner Door Gasket Clamp is an OEM part for LG washing machines. It secures the inner door gasket in place, ensuring a tight seal to prevent water leaks during the wash cycle. This clamp is essential for maintaining the efficiency and reliability of the washing machine by keeping the door gasket firmly in position.
Over time, wear and tear, exposure to water and detergent, or accidental mishandling can compromise the integrity of the clamp, leading to potential leaks.
Symptoms of a bad inner door gasket clamp include:
- Water leaking from the door area
- The door gasket not staying securely in place
- Visible damage or corrosion on the clamp
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Lg washer/dryer combo unit shook upper counter balance weight loose damaging the mount lugs on the tub cover and tore the tub gasket Christine V. • Saluda , VA • March 28, 2020
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back...
Read more
More
$37.58
- Compare At:
-
$45.10
- You Save:
-
$7.52
Genuine Lg part
By: Lg
Part Number: 4036ER2003A
The Lower Tub Seal is an OEM part for LG front-loading washing machines. It is located between the inner and outer tubs, creating a barrier to prevent water from leaking through the space between these two components.
Symptoms of a leaking lower tub seal include:
- Water stains or moisture accumulating on the outer tub surface
- Puddles of water found underneath the machine
- Excess vibration or noise from unbalanced water pressure
Failure can occur from mineral deposits obstructing the sealing surface over time. Cracks or tears in the seal material also compromise its leak-prevention ability.
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Washer started vibrating and smoking when spinning the door seal showed damage from the inner tub and the inner tub had a lot of up and down play in it Dan R. • Woodbine , IA • March 13, 2015
An online search for LG washing machine parts came up with a repair video from Appliance Parts Pros. I watched the video. It was very well done, very detailed, and took you step by step through the entire process to replace the tub bearings and the spider, from start to finish. After watching the video, I realized this repair was well within my abilities. No specialized tools were needed. I ordered the parts from Appliance Parts Pros, and all items were in stock and delivered within a couple...
Read more
More
$37.58
- Compare At:
-
$44.72
- You Save:
-
$7.14
Genuine Lg part
By: Lg
Part Number: 4925ER1015B
The Dispenser Assembly is an OEM part for LG front-loading washers. It is responsible for dispensing detergent and fabric softener at the appropriate times during the wash cycle. The dispenser assembly contains separate compartments for detergent and fabric softener, as well as timed mechanisms that release each additive when needed for cleaning and softening results.
Causes of a bad dispenser assembly can include issues with the dispensing mechanisms like clogging, jamming, or malfunctions preventing the timely release of detergent and softener. Damage to compartment seals or lids could also cause improper dispensing.
Symptoms of a bad dispenser assembly include:
- Residue or buildup of detergent in the drum or tub
- Strong detergent or fabric softener odors that won't come out of clothes
- Dispenser drawers, lids, or seals that do not close or lock securely
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The problem was the drawer would get caught inside the dispenser assembly the top of the dispenser assembly had started to droop down catching the drawer Danny A. • Bedford , TX • December 26, 2014
I replaced the dispenser assembly and since this was being replaced, I installed a new drawer and detergent box assembly.
Read more
More
$53.36
- Compare At:
-
$63.50
- You Save:
-
$10.14
Genuine Lg part
By: Lg
Part Number: 6201EC1006T
The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment.
Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter.
Symptoms of a bad Noise Filter Assembly include:
- Increased electrical noise or buzzing sounds emanating from the washer
- Intermittent disruptions in the washer's performance
- The washing machine failing to start or experiencing power fluctuations
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg washer would not turn on unplugging it allowed for one load but needed to be replunged each time Nieves O. • Sugar Land , TX • September 11, 2016
Searched the web and determined it was something called a noise filter. Ordered the part from ApplianceParts Pros. Received it in about 3 days, normal shipping. Replaced the part. Took about 15 minutes from start to finish. Problem solved. Cost less than $50.
Read more
More
$78.51
- Compare At:
-
$94.21
- You Save:
-
$15.70
Genuine Lg part
By: Lg
Part Number: 4036ER4001C
The Outer Tub Seal is an OEM part for LG washing machines. It provides a watertight seal between the outer tub and the tub cover, preventing water from leaking during the wash and spin cycles.
Causes of a bad outer tub seal can include wear and tear over time, exposure to harsh detergents, or damage from foreign objects that may enter the tub during washing. A compromised seal can lead to water leakage, which can cause further damage to the washing machine and the surrounding area.
Symptoms of a bad outer tub seal include:
- Water leaking from the bottom of the washing machine
- Mold or mildew growth around the seal
- Excessive moisture in the area surrounding the washer
- Unusual noises during the wash or spin cycles
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Washer started vibrating and smoking when spinning the door seal showed damage from the inner tub and the inner tub had a lot of up and down play in it Dan R. • Woodbine , IA • March 13, 2015
An online search for LG washing machine parts came up with a repair video from Appliance Parts Pros. I watched the video. It was very well done, very detailed, and took you step by step through the entire process to replace the tub bearings and the spider, from start to finish. After watching the video, I realized this repair was well within my abilities. No specialized tools were needed. I ordered the parts from Appliance Parts Pros, and all items were in stock and delivered within a couple...
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: 4738ER2002A
The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.
Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.
Symptoms of a bad vent hose include:
- Excessive moisture or condensation inside the washer
- Musty odors from the washing machine
- Visible cracks or holes in the hose
- Poor ventilation leading to inefficient washing cycles
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Water leaking from my front load washing machine Donald H. • Tustin , CA • July 03, 2015
Removed the top cover while the machine was operating, located the source of the leak. The top filler tube had worn a hole in a flex point. Found the right part on this site, replaced it with little effort. While in there I saw a similar hose and decided to replace it as its time was probably up too. So far so good, washing clothes and no leaks!! Great prices and best of all the right parts were delivered in a timely manner. Thanks for making this so easy. Only specialty tool used was hose...
Read more
More
$44.71
- Compare At:
-
$53.20
- You Save:
-
$8.49