Steven H Orlando , FL June 03, 2017 Appliance: LG Washer WM2650HWA No power of functionality I researched the problem online and tried to troubleshoot it by unplugging the machine and holding the start button for five seconds. I plugged it back in and still no response, which indicated it was most likely a bad Main PCB. I order the part and with Appliance Parts Pros' superb standard shipping service I received it a day and a half later. I removed the cover on the bad Main PCB, snapped a quick photo of the wiring and then installed the new Main PCB. I plugged in the washer and it works perfect! It is a very easy job and took 45 minutes total (working slow and methodically). I was quoted a repair tech visit of $425. I saved $250 by doing it myself. Read More... 9 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Richard H Staunton , VA October 27, 2015 Appliance: Model LG WASHER WM2650HRA Lg waster totally dead no lights on outside or led on main circuit board Top comes off by removing two rear screws and push an inch or so backwards on the top. Next checked for power on the Power Conditioner, Had power, Check to make sure it was on the Main Circuit board also. Replace Main Circuit board by pulling all the keyed electrical connections, hook all new one up and put everything together. Much easier then expected. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Mike L Royersford , PA May 21, 2017 Main control board broke on lg front loader Replaced control board Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Tom D Lawrenceville , NJ December 11, 2015 Appliance: Model LG WM2540HWA Lg washer dropped out mid spin cycle After attempting to get a Service Manual from another vendor, countless trips to YouTube for ideas and testing circuits to figure out what might be the problem I took the chance on ordering a new power control board from APP. Whether my error or theirs I was sent the wrong board BUT a brief phone call and quick work had the new board in my hands in 2 days and my washer up and running 1/2 hour after unpacking! Thanks APP. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Lesley Y Zephyrhills , FL December 08, 2019 Washing machine would not spin out Pcb assembly Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes