Need Help?
Call or text
Replaces the bottom panel inside your range oven cavity. Install this base if your current panel is warped, stained, or damaged from spills and cleaners.
Ordered new part for bottom of oven. Threw away ruined part. Read more
Usually ships within 4 - 14 days
Replaces cracked, worn, or unresponsive touchpad and control panel assembly on your range. Restores button function and display when keys stop working.
Replaced Control Panel on LG Oven. I would not recommend these LG Ovens. This is the THIRD control panel in 5 years. Read more
Replaces cracked, broken, or unresponsive touch pad control panel on your range. Installs at the front of the cooktop to restore touch control functionality.
To replace the stove touch control panel was easy. From the rear of the stove, remove the cover for the heating element / lock actuator (left side, 2 screws), remove the upper panel (8 perimeter screws & 4 centerline screws). From the control panel, remove the 14 connectors. To remove the ribbon cable pull connector retainer (about 1/8"), pull ribbon cable out of retainer. On the front of the stove, bottom of the face, remove the two screws that retain the control panel (outer most screw on... Read more
White control knob for gas range burner or oven temperature adjustment. Replace broken, cracked, or missing knobs to restore full cooktop control.
I ordered a new range control knob from your site and replaced the old knob with the new one. Easy fix. I received the part promptly and was happy to see the new core is aluminium and not plastic like before. I'm sure I will have no more trouble with this knob. Unfortunately there are 4 others that could break .Oh well. Now I know where to order new ones if and when that happens. Read more
Fix unresponsive controls, burners not working, or F1 error codes with this range sub circuit board. Moderately difficult DIY repair with small clips.
This job was easy really only need a screwdriver to complete. After installing the board I found that some of the connectors on the board were upside down, so I pulled the board back out to compare with the old one. After comparing the boards some connectors were upside down but I noticed that the components on the board were also flipped as they were numbered the same. I installed the new board again and flipped the 3 cables and put everything back together. New board works great so far. Read more
This time delay fuse protects the appliance from overheating by opening the circuit when temperatures exceed safe limits. It's a direct-replacement electrical safety fuse used in heating circuits to help prevent damage and fire risk. What it does:
Actual problem was due to a poor connection from the circuit board and HV transformer, over time this poor / loose connection began to arc causing enough heat to physically melt the connector and the contact to the thermistor. the problem was obvious but I still followed procedures to check all the components.*** NOTE*** ALWAYS UNPLUG DEVICE FIRST, WITH MICROVAVES, ALWAYS, ALWAYS, DISCHARGE HV CAPICITOR, IT CAN KILL YOU! just take your time testing components, following your electronic... Read more
Note: Due to factory variations, please check your original board before ordering. This display control board has 17 buttons on the front. If your original board has 18 buttons, you may need part# EBR89296404 instead.
The Display PCB Assembly is an OEM part for LG ranges and stoves. It is the main circuit board that controls the display panel and oven. This assembly is responsible for operating all electronic functions such as temperature controls, timers, buttons and digital displays.
Causes of a bad display PCB assembly can be water or liquid damage, failure due to surges or spikes in the power supply over time, or due to normal component degradation after heavy use.
Symptoms of a bad display PCB assembly include:
This OEM LG part is also compatible with some Kenmore models.