Parts for Kitchenaid KODE900HBS00: Lower Oven Door Parts

This is the inner door glass panel that sits inside the oven door assembly, allowing you to view the oven cavity while providing heat insulation. It works with the outer glass and any middle panels to maintain safe exterior door temperatures during use. Replace it if the glass is cracked, shattered, or has developed haze or cloudiness that cannot be cleaned.

Maintains oven door structure and secures the glass panels in place. Replace if cracked, broken, or missing to restore proper door assembly and fit.

This 10-32 x 3/8 machine screw secures appliance components. It keeps panels, brackets, and trim firmly attached so everything stays aligned and quiet during operation.

• Fastens metal parts using a 10-32 thread in pre-tapped holes or with a matching 10-32 nut
• Maintains proper alignment of panels, brackets, and trim to reduce vibration and rattling
• Replace if the original screw is missing, stripped, rusted, or damaged
• Using the correct hardware helps restore a secure, factory-tight fit

• Disconnect power; shut off gas supply if applicable. Allow the appliance to cool completely before servicing
• Note screw locations/lengths and replace like-for-like
• Start threads by hand to avoid cross-threading; snug with the appropriate driver—do not overtighten
• If the receiving threads are damaged, repair or replace the mating component before installing

Adhesive-backed identification label displaying model and serial numbers. Restores clear product ID when original nameplate is faded, peeling, or missing.

The Trim-Vent is an OEM part for Whirlpool built-in wall ovens. Positioned around the opening, it provides an attractively finished border while also directing steam away from surrounding cabinetry.  

Symptoms of a bad trim-vent include: 

• Warped or swollen cabinetry surfaces near the oven     
• Mold or mildew stains appearing on neighboring wood
• Drafts of hot air leaking around the oven opening
• Gaps exposing unfinished insulation or framing

As the critical edge between the oven and enclosure, trim vents endure constant heat and moisture exposure during cooking cycles. Causes of failure are typically cracked seals or loose fasteners no longer preventing leaks.  

Replacing with this OEM vent restores safe and attractive integration of the range into the surrounding space. Compatible also with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore built-in wall ovens.

Secures the oven door hinge pin to the cabinet for proper alignment and sealing. Replace when the door sags, won't close evenly, or feels loose. Confirm fit.

Replacement door glass panel for electric wall ovens. Installs in the outer door frame. Order when your original glass is cracked, shattered, or broken.

This is the outer door glass panel assembly for a wall oven, featuring a stainless steel finish. It forms the exterior surface of the oven door and provides insulation while allowing you to view the oven interior through the glass window. Replace this assembly if the outer glass is cracked, shattered, or if the stainless panel is dented or damaged, which can affect heat retention and the appearance of the oven.

Color: Stainless

The Door Handle is an OEM part for Whirlpool microwaves. It is an external component consumers interact with frequently for opening and closing access to the microwave interior.

Causes of a bad door handle can include normal wear and tear affecting functionality over thousands of uses. Thin plastics or loose hardware holding the handle can deteriorate more quickly.

Symptoms of a bad door handle include:

• The handle no longer latches the door securely  
• Difficulty opening or closing the microwave door
• The handle coming loose or detaching completely
• Issues using locking/unlocking mechanisms

This OEM replacement Whirlpool door handle ensures smooth, dependable performance for the lifespan of the microwave. Its sturdy construction and precise fit maintain usability. This OEM part is also compatible with Maytag, Roper, Jenn-Air, Admiral, KitchenAid, and Frigidaire microwaves.
 

Replacement door glass panel for wall ovens. Restores clear viewing and proper door seal. Replace when cracked, cloudy, or damaged. Confirm fit with model.

Seals your oven's exhaust vent to prevent air leaks and maintain proper airflow. Replace if you notice drafts or heat escaping. Confirm fit with model.

Fastens panels, brackets, trim, and hardware in your oven or range. Replace missing, stripped, or damaged screws to eliminate rattles and secure components.

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Positions and supports exhaust components at the top outlet for proper duct alignment and seal. Replace if damaged or missing to prevent air leaks and vibration.

Cushions contact points inside your oven to prevent metal-to-metal impact. Replace if cracked, worn, or missing to reduce noise and protect finishes.

This flat washer is a direct-replacement fastening washer that restores proper spacing and fastening for appliance panels and components. It helps re-secure loose hardware so assemblies sit and operate as intended. What it does:

• Provides a smooth bearing surface for bolts and screws to distribute load
• Helps keep fasteners tight to prevent wobble or loose panels
• Restores correct spacing and alignment between mating parts
• Can reduce vibration-related noise when worn or missing

• One replacement flat washer

• Disconnect power and water before starting repairs
• Use the correct size socket or driver to remove and reinstall fasteners
• Inspect mating fastener and surrounding parts for wear; replace if damaged
• Tighten hardware securely but avoid overtightening which can deform the washer

Secures panels, trim, and brackets in refrigerators, ranges, ovens, and microwaves. Replace if missing, stripped, or damaged during repairs or maintenance.

This door plastic bracket secures the appliance door to the cabinet, keeping the door aligned and stable so it closes properly and seals. A simple replacement for worn, cracked, or broken door support hardware. What it does

• Holds the door in the correct position and connects the door assembly to the cabinet.
• Restores proper door alignment to reduce gaps, scraping, or uneven closing.
• Stops rattling or rocking caused by a cracked or broken bracket.
• Helps the door latch and seal correctly so the appliance can operate safely.

• One door plastic bracket (LW) as shown.

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the door or inner door panel; keep track of fasteners.
• Inspect surrounding screws, clips, and the mating surface; replace any damaged fasteners.

Secures your oven door to the cabinet hinge for smooth opening and closing. Replace if cracked, broken, or missing to restore proper door alignment.

Self-tapping screw used in range assembly. Features 8-18 thread size and 0.375 inch length. Also used in some washer models as cross-appliance hardware.

The Screw is an OEM part for Whirlpool microwaves. It is a small yet vital component that joins together other parts of the microwave to create a cohesive machine. The screw is responsible for tightly securing internal components like the magnetron tube, control panel, and outer case during operation.  

Symptoms of a bad screw include:

• Loose or detached internal microwave components 
• External parts like the door or casing that will not stay aligned or attached
• Overheating or arcing due to poor grounding from loose screws
• Component malfunctions if mounting positions are compromised

Causes of a bad screw can include wear and tear that causes stripping or loosening over time, or damage from handling that results in breaking or bending.  

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave models.