Parts for Electrolux ECWD3012ASB: Lower Oven Parts

This replacement switch restores reliable control of a selected function by opening or closing an electrical circuit inside your appliance. When the original switch wears out, buttons may stop responding or features may not activate consistently.

• Opens/closes an electrical circuit when the button/actuator is engaged
• Routes power or sends a signal to the control or component
• Common symptoms: no response when pressed, intermittent operation, or function won't start
• May show signs of heat damage, loose terminals, or inconsistent "click" feel

• Disconnect power at the breaker before servicing
• Photograph or label wire positions to ensure correct transfer to the new switch
• Move wires one at a time; fully seat connectors on the correct terminals
• Reassemble, restore power, and test the function activated by the switch

This lamp assembly replaces a damaged or nonworking interior refrigerator light to restore safe, reliable illumination. It includes the housing and lamp so you can see contents clearly and check temperatures at-a-glance. What it does

• Provides interior lighting so food and controls are visible when the door is opened
• Replaces cracked or yellowed lens/housing that scatters light or exposes wiring
• Restores a light that stays off due to a broken assembly
• Helps prevent food spoilage by making it easier to find items and verify temperatures

• One lamp assembly (housing with lamp)

• Disconnect power or unplug the appliance before beginning work
• Use basic hand tools; handle glass or lens pieces carefully to avoid breakage
• Check the door switch and wiring harness

This small replacement spacer positions and secures appliance components to maintain correct alignment and fit. Installing the spacer restores proper panel spacing and reduces vibration where a worn or missing spacer causes looseness or rubbing. What it does:

• Maintains the correct gap between panels, trim, or assemblies to ensure parts fit flush
• Keeps components aligned to prevent rubbing, binding, or uneven wear
• Helps reduce vibration and rattling caused by a missing or damaged spacer
• Preserves original part spacing for reliable operation of the surrounding components

• Disconnect power to the appliance before any service to avoid shock or injury
• Remove any trim or fasteners that block access; keep track of screws and small parts
• Match the new spacer's orientation to the original; do not force parts into place

This temperature probe senses oven cavity temperature and sends a signal to the range control so the oven can regulate heat. It helps restore accurate temperature readings for consistent baking and cooking results. What it does

• Senses oven temperature and relays readings to the control board
• Allows the control to cycle heating elements or gas valve for stable temps
• Commonly replaces a failed or intermittent sensor that causes incorrect oven temps
• Resolves symptoms like oven running too hot, too cool, or showing temperature error codes

• Disconnect power to the appliance before starting any repair to avoid shock.
• Handle the sensor and its wiring gently; avoid kinking or pulling on the lead.
• Route and secure the sensor lead the same way as the original to prevent contact with heating elements.

This door hinge secures and guides a refrigerator or freezer door, restoring proper alignment and smooth opening/closing. It replaces a worn or damaged hinge to help stop door sag, rubbing, or uneven sealing. What it does:

• Supports the door at the cabinet, bearing the door's weight and pivoting for opening/closing
• Restores correct door alignment to improve gasket contact and sealing
• Reduces door sag, binding, or scraping against cabinet or shelves
• Helps prevent uneven wear on the door and frame caused by a failing hinge

• Basic mechanical replacement; use proper tools and support the door to prevent dropping
• Power off and remove contents from the door before starting work
• Tighten mounting screws securely but avoid over-torquing to prevent damage

This replacement evaporator fan blade helps circulate cold air inside the freezer or refrigerator compartment to maintain even temperatures and proper cooling performance. A direct-fit replacement when the existing blade is cracked, warped, or missing. What it does:

• Moves air across the evaporator to promote even cooling and frost prevention
• Restores proper airflow when a damaged blade causes noise or reduced cooling
• Helps reduce hot or warm spots inside the compartment
• Quiet, balanced operation when installed correctly

• One replacement evaporator fan blade

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing interior panels in the freezer/refrigerator compartment
• Inspect the fan motor shaft and mounting for damage before installing the new blade

This is a replacement mounting nut used to secure components on compatible Frigidaire appliances. It provides a simple, reliable fastener to replace a missing, damaged, or corroded nut and restore proper part retention. What it does

• Secures panels, brackets, or hardware so parts stay in position during use
• Replaces stripped, rusted, or missing nuts that cause rattling or loose components
• Helps restore proper alignment and safe operation of the affected assembly
• Small fastener used wherever the OEM diagram specifies part 561231207

• One mounting nut (part number 561231207)

• Disconnect power or unplug the appliance before starting any repair
• Use the correct-size wrench or socket to avoid rounding the nut
• Tighten snugly but do not overtighten to prevent thread damage
• If the original nut was corroded, inspect mating threads and replace the bolt/stud if needed

This wiring harness supplies electrical connections between components, restoring power and signals for the affected circuit. It replaces a damaged or worn harness to help eliminate intermittent power or connection failures. What it does

• Carries power and signal between appliance components so controls and motors can operate
• Restores secure plug-and-socket connections when original wires or terminals are frayed or broken
• Helps address symptoms such as intermittent operation, blown fuses, or components not receiving power
• Matches OEM connector ends and wire routing to fit into the factory harness path

• Disconnect power (unplug appliance or shut off breaker) before beginning any repair
• Compare new harness to the old one to ensure connectors and wire lengths match before installation
• Route harness along the original path and secure with existing clips or ties to avoid heat and abrasion