Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Ge CHS995SEL1SS: Lower Oven Parts

Parts for Ge CHS995SEL1SS: Lower Oven Parts

Location on Diagram
Part Description
Price & Availability
25
By: Ge
Part Number: WB18X31611
$25.67

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
26
By: Ge
Part Number: WB18X31621
$48.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
43
Best Seller
Product photo
4.7 (14)
By: Ge
Part Number: WB23X5340

If your oven won't preheat or shows an F3 error code, this temperature sensor monitors oven heat and safety features. Direct plug replacement, 15-minute fix.

More
$136.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
200
Product photo
By: Ge
Part Number: WB48X21508

Flat wire shelf that slides into your oven's side supports to hold bakeware at the correct height. Replace if bent, warped, or missing a rack position.

More
$53.36

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
210
By: Ge
Part Number: WB63X28661

Bottom oven panel for electric ranges. Replaces cracked, damaged, or worn panels on the lower oven exterior. Restores the finished appearance of your range.

More
$94.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
215
By: Ge
Part Number: WB32X29538

Replace your range oven door gasket to restore proper sealing and heat retention. Install when you notice heat escaping or uneven cooking. Verify fit.

More
$48.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
233
By: Ge
Part Number: WB24X29265

This dual plunger switch completes dispenser controls when the dispenser lever is pressed, restoring proper water and ice dispensing response. It replaces a worn or failed dispenser actuator switch to help the dispenser register lever movement. What it does:

  • Acts as the dispenser lever switch assembly, closing circuits when the lever/plunger is depressed
  • Controls water and/or ice dispense signals to the dispenser control board or valve
  • Commonly linked to symptoms such as no water or ice when pressing the dispenser, intermittent dispensing, or unresponsive dispenser lever
  • Helps restore reliable electrical contact for dispenser operation when the original switch is faulty
What's included:
  • One dual plunger switch assembly
Install notes:
  • Disconnect power to the appliance before beginning any work
  • Shut off water supply if removing water-connected components near the dispenser
  • Access typically requires removing the dispenser bezel or front panel to reach the switch; handle panels and connectors gently
  • Reconnect wiring exactly as removed and verify operation before reassembling all panels

More
$32.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
235
Best Seller
Product photo
5.0 (36)
By: Ge
Part Number: WB08T10002

Holds and powers the interior oven light bulb for visibility while cooking. Replace if light flickers, won't turn on, or bulbs burn out frequently. Verify fit by your model number before ordering.

More
$31.49

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
242
By: Ge
Part Number: WB2K41

Mounting bracket secures oven components inside your range. Replace if bracket is bent, cracked, broken, or missing to restore proper structural support.

More
$8.12

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
251
Product photo
By: Ge
Part Number: WB2K3

Metal angle support bracket that secures interior panels, shelves, or trim inside your range. Replace if cracked, bent, or missing to maintain proper alignment.

More
$6.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
256
By: Ge
Part Number: WB35X28921
$11.38

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
257
By: Ge
Part Number: WB34X28916
$27.54

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
264
By: Ge
Part Number: WB35K10028
$31.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
271
By: Ge
Part Number: WB34X21619
$17.21

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
277
By: Ge
Part Number: WB32K10044

Seals between the oven light lens and liner to keep grease and moisture out. Replace if damaged, cracked, or no longer sealing properly.

More
$8.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
280
Product photo
By: Ge
Part Number: WB10X28795

The Latch Automatic is an OEM component specifically designed for GE ranges. It is responsible for automatically latching and locking the oven door securely in the closed position.   

Symptoms of a bad automatic latch include:

  • The door not latching or locking fully when closed  
  • Difficulty keeping the door securely shut
  • Inability to automatically engage the latch

Causes of a bad automatic latch can include wear and tear from extended use over time, broken or loose gears and springs, or damage that impairs the proper functioning of the latching mechanism.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

More
$76.51

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
292
By: Ge
Part Number: WB44X47930
$55.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
293
By: Ge
Part Number: WB44X47932

Oven not heating evenly or bottom not baking properly? This hidden bake element restores consistent bottom heat. Moderate DIY repair in 30-45 minutes.

More
$64.70

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
730
Best Seller
Product photo
5.0 (8)
By: Ge
Part Number: WB20T10024

The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking.

Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age.

Symptoms of an inadequate probe thermistor include:

  • Inaccurate temperature readings and baking inconsistencies
  • Oven temperature exceeding desired setting risking fire

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

More
$58.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
731
By: Ge
Part Number: WB20X28966

A temperature probe that senses oven temperature and sends readings to the control board so the appliance can regulate cooking heat. Replaces a failed or intermittent probe to restore accurate temperature feedback. What it does

  • Measures internal oven temperature and provides a signal to the oven control for proper temperature regulation
  • Can cause inaccurate baking, uneven cooking, or oven error codes when faulty or open/shorted
  • Works as the sensor input used by the control to heat cycles on/off
  • Typically mounts inside the oven cavity and connects to the control harness
What's included
  • One temperature probe (BLE) sensor
Install notes
  • Disconnect power to the appliance before servicing to avoid shock or injury
  • Handle the probe and wiring gently; do not kink or sharply bend the sensor lead
  • Verify connector alignment and secure fit to the control harness; test continuity per OEM instructions before full reassembly

More
$207.76

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
1330
Product photo
By: Ge
Part Number: WB10X28563

A receiver hinge that secures and supports an oven door hinge pin to keep the door aligned and operating smoothly. Replaces a worn or broken receiver to restore proper door fit and movement. What it does

  • Accepts and retains the oven door hinge pin so the door opens and closes correctly.
  • Supports door weight to prevent sagging or uneven alignment.
  • Helps the door latch and seal properly for safe, consistent operation.
  • Commonly replaced when the door drops, rubs, or will not stay closed.
What's included
  • One receiver hinge
Install notes
  • Disconnect power to the appliance before servicing to avoid shock or injury.
  • Remove the oven door or access panel per the service manual for safer installation.
  • Use basic hand tools; check hinge pins and mating hardware for wear and replace if needed.

More
$11.38

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google