Parts for Ge GTS21FMKCES: Machine Compartment Parts

This is a #8 x 9/16" pan head Phillips screw used to fasten trim, panels, and small components on compatible appliances. It replaces lost or damaged mounting screws to restore secure fittings and proper alignment. What it does:

• Secures plastic trim, panels, and brackets to appliance housings
• Provides a flush, rounded head for a clean finished appearance
• Phillips drive allows easy installation with common screwdrivers
• Resists loosening under normal appliance vibration

• Use the correct-size Phillips driver to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid over-tightening
• Replace any corroded or damaged screws to maintain secure attachments
• Disconnect power to the appliance before accessing internal components

This ground screw secures a cabinet or component grounding conductor, providing a reliable electrical ground connection to help reduce shock and interference risk. Compact and simple, it's used where chassis grounding is required. What it does:

• Fastens a ground wire to the appliance chassis or mounting point
• Star washer bites into metal to improve contact and prevent loosening
• Helps maintain a consistent ground to reduce electrical noise and safety hazards
• Commonly used on control panels, motors, or metal cabinet grounding points

• Disconnect power or unplug the appliance before accessing electrical components
• Ensure the mating surface is clean and free of paint or corrosion for proper grounding
• Tighten securely but do not over-torque; washer is designed to bite into metal

The Power Cord is an OEM replacement part for GE refrigerators. It is responsible for supplying electricity to your refrigerator, allowing it to function properly and provide optimal cooling performance.

A bad power cord can occur due to wear and tear, damage, or loose connections. If you notice symptoms such as intermittent power loss, flickering lights, or the refrigerator not cooling effectively, it may indicate a need to replace the power cord.

Symptoms of a bad power cord include:

• Intermittent power loss
• Flickering lights
• Ineffective cooling

Restore your refrigerator by replacing the faulty power cord with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This condenser fan motor moves air across the condenser coils to help your refrigerator reject heat and run efficiently. Replaces a worn or failed condenser fan motor to restore proper cooling performance and airflow. What it does:

• Spins the condenser fan blade to circulate air through the condenser coils
• Helps the compressor and evaporator run at correct temperatures by removing heat
• Commonly replaces motors that are noisy, not running, or causing poor cooling
• Can reduce cycling or overheating issues when replacing a failed motor

• Disconnect power to the appliance before starting any repair
• Access typically requires removing rear or bottom panels; keep track of screws and hardware
• Note motor wiring and fan blade orientation before removal; reconnect wires to the same terminals
• Handle the fan blade carefully and secure mounting before restoring power

The Compressor is an OEM component specifically designed for GE top-mounted and bottom-mounted refrigerator freezers. Responsible for circulating refrigerant, its robust motor compressively moves gas to chill interiors reliably. Permanent lubrication withstands constant operation.

Symptoms of a faulty compressor commonly involve cycling off too frequently or inefficient temperature regulation. Loss of pressure from degradation risks expensive repairs necessitating replacement. 

Causes of a bad compressor relate to typical wear reducing circulation. Over-activation exposes motor windings to damage requiring timely change.

Causes of a bad compressor can involve:

• Failure to maintain set temperatures 
• Frost buildup impairing performance
• Vibrations transferring to cabinetry

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire refrigerators. Replace to retain steady refrigeration preserving freshness for dependable operation long-term.
 

The Start Device is an OEM part for GE refrigerators. It initiates automated functions by sending a starting signal to various refrigerator components. Proper operation relies on the start device acting as the cue to begin cooling cycles, fan motors, and lighting circuits.

Symptoms of a defective start device may include:

• Refusal to turn on or respond to settings adjustments
• Slow or ineffective cooling inside cabinets    
• Lack of airflow circulation or interior lighting

Causes could be worn-out solenoid coils preventing magnetic attraction over extended use, loose wiring inhibiting communication with control boards, or moisture infiltration shortening the starting mechanism.   

Replacing with this genuine GE start device restores dependable appliance routines. Compatible with Hotpoint, RCA, and select Kenmore side-by-side models, it supports reliable refrigerator functioning for years.

Specs: 8-32 ca hxw 1/2

This clip retainer combo secures appliance panels and trim, restoring proper fit and preventing rattling or sagging. It replaces worn or broken retainers so doors, drawers, or trim pieces stay aligned and stable. What it does:

• Holds and aligns trim or panel pieces to the appliance cabinet
• Prevents loose, vibrating, or sagging panels and trim
• Replaces cracked or broken retainers that no longer secure parts
• Restores a flush, finished appearance and reduces noise from vibration

• Disconnect power to the appliance before beginning any repair
• Remove the affected panel or trim per the appliance service instructions
• Press or snap the retainer into the mounting location until it seats fully; reinstall panel/trim
• If clips are brittle or adjacent fasteners are damaged, inspect and replace as needed