Parts for Lg LRSXC2306V/00: Machine Compartment Parts

This drain tube assembly routes and removes wash water from the tub to the drain system, helping prevent water buildup and allowing normal drain cycles. It replaces worn or damaged drain tubing for reliable water flow. What it does:

• Channels discharged water from the washer tub to the household drain
• Prevents leaks and water pooling caused by cracked, split, or collapsed tubing
• Supports normal draining and pump operation by maintaining a clear path for flow
• Helps reduce the chance of odor or mildew from standing water in the drain line

• Disconnect power and shut off water supply before starting any repair
• Secure with existing or new clamps to prevent kinks and leaks
• Inspect adjoining hoses, fittings, and the pump outlet; replace damaged components as needed
• After installation, run a short drain cycle to check for leaks and proper flow

The Link is an OEM part for LG refrigerators. It serves as an integral connector between the refrigerator door and cabinet, facilitating smooth opening and closing of the door. With durable construction and precise engineering, the link is designed to withstand the rigorous motion of hundreds of door openings without compromising functionality. 

Symptoms of a bad link include:

• Doors that do not close or seal properly 
• Excessive noise or vibration from the door area
• Damage, bending, or breakage of the connecting pieces
• Misalignment impairing proper door operation

Causes can stem from normal wear and tear over many years of use. Replacing a faulty link restores the refrigerator door's designed motion for convenient access to the interior.

This OEM LG part fits seamlessly while extending the product's useful life. This part is also compatible with Kenmore models featuring LG's refrigerator link assembly design.

This ice bucket assembly holds and stores ice made by the refrigerator's icemaker, providing a removable container for convenient access and clean storage. Designed to replace a cracked, warped, or damaged ice bucket to restore proper ice handling. What it does:

• Collects and contains ice produced by the icemaker.
• Guides ice toward the dispenser or auger so ice can be retrieved or dispensed.
• Prevents ice from spilling into the freezer compartment.
• Restores proper fit and alignment when an old bucket is cracked, broken, or missing.

• One ice bucket assembly.

• Unplug the refrigerator or disconnect power before servicing to prevent injury.
• Remove the old bucket by sliding it out of the freezer shelf/compartment per your model's procedure; install the replacement by seating it until it clicks or aligns.
• Handle the bucket carefully to avoid cracking plastic tabs; do not force parts that resist.

This tray assembly replaces a cracked, warped or broken refrigerator drawer tray to restore a stable storage surface and proper drawer function. It supports stored items and helps keep foods contained for everyday use. What it does:

• Provides a stable, molded surface that holds foods and containers inside the drawer
• Restores proper fit and alignment so the drawer opens and closes smoothly
• Prevents items from shifting or falling through a damaged tray
• Reduces risk of leaks or pooling from cracks or warping

• One tray assembly

• Unplug the refrigerator or disconnect power before servicing to reduce shock risk
• Empty the drawer and remove any clips or rails per your model's service instructions
• Align the tray with the drawer rails and slide in gently until it seats; do not force
• If you encounter broken mounting tabs, replace any damaged fasteners or supports as needed

Replacement drawer tray assembly that supports and guides a refrigerator drawer, restoring stable storage and smooth sliding action so the drawer sits level and closes properly after damage, cracking, or wear. What it does:

• Supports the drawer and provides a smooth sliding surface for normal use.
• Restores proper alignment when a cracked or broken tray causes the drawer to sit unevenly.
• Helps stop sticking, rattling, or binding caused by a damaged tray.
• Keeps the drawer from contacting the cabinet to protect stored items.

• Disconnect power to the appliance or unplug before servicing.
• Remove drawer and any stored items; follow your owner manual for removal steps.
• Slide the replacement tray into the drawer mounting tracks until properly seated; inspect mounting tabs and rails for damage before reassembly.

This refrigerator shelf assembly provides a stable, easy-to-clean surface for organizing food and containers. It replaces a cracked, chipped, or missing shelf to restore storage space and proper item support. What it does:

• Supports food, containers, and small appliances on a flat, stable glass surface
• Helps maintain organization and maximizes usable shelf space
• Replaces cracked, chipped, or damaged shelves that cause items to tip or fall
• Restores proper fit when the previous shelf no longer seats securely

• Handle glass parts carefully; wear cut-resistant gloves to avoid injury
• Verify shelf orientation and support rails before seating the shelf into place
• No special tools typically required; lift slightly to engage/remove from support rails
• If damaged mounting hardware is present, replace hardware before installing the shelf

This refrigerator shelf assembly replaces a worn, cracked, or missing shelf to restore stable storage and organization in the fresh-food compartment. It provides a stable surface for food containers and helps keep items from shifting. What it does

• Supports food, containers and small appliances inside the refrigerator.
• Replaces cracked, chipped or broken shelving that can't safely hold items.
• Restores proper spacing and organization to help prevent spills and overcrowding.
• Common symptom: visible shelf damage, sagging, or items falling through the shelf area.

• One refrigerator shelf assembly as shown.

• High-level replacement — remove food and pull out the existing shelf; slide the new shelf into the same tracks or supports.
• Handle glass shelves with care; use gloves and eye protection when removing broken parts.
• If the shelf uses clips or brackets, confirm they are present and secure before use; replace damaged supports separately.
• Unplug the appliance only if instructed by the OEM for your specific model before performing work that requires power removal.

This refrigerator glass shelf assembly restores a level, sturdy shelf surface for food storage and organization. It provides a durable glass platform with trim to help contain spills and keep items stable inside the fresh-food compartment. What it does:

• Replaces a cracked, chipped or missing refrigerator shelf to regain usable storage space
• Provides a smooth, easy-to-clean surface that helps contain minor spills
• Supports packaged foods, containers and small appliances stored on the shelf
• Helps maintain proper airflow and organization when installed in the correct shelf slots

• Turn off power to the refrigerator and remove stored items from the shelf area before installing
• Slide the shelf into the existing shelf supports or brackets until fully seated and level
• Handle the glass carefully and wear gloves to avoid cuts if the old shelf is broken
• Inspect and replace damaged shelf supports or trim separately

The Crisper Drawer Cover Assembly is an OEM part for LG refrigerators. This assembly is designed to act as a cover for the crisper drawers while also providing a stable surface for storing food items above the drawers. It includes glass and frame components, which work together to maintain optimal organization and airflow within the refrigerator, helping to keep produce fresh.

Common causes of a damaged crisper drawer cover include accidental dropping, overloading the drawers or shelves, or wear and tear from regular use. Cracks, chips, or warping in the frame or glass can compromise the cover’s functionality and appearance.

Symptoms of a bad crisper drawer cover include:

• Difficulty sliding or properly aligning the crisper drawers
• Broken or missing sections of the cover or frame
• Reduced stability for items stored above the crisper area

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This Cover Assembly (TV) is the interior air-vent/damper cover used in select refrigerators. It shields the vent components and helps direct chilled airflow into the fresh food section, supporting even temperatures and quiet, secure operation.

• Covers and protects the upper air-vent/damper area inside the refrigerator compartment
• Helps seal and channel airflow from the freezer into the refrigerator for consistent cooling
• Common symptoms: cracked or missing cover, broken tabs, rattling/vibration, temperature fluctuations or warm spots near the top vent
• Restores proper fit and finish to the interior, preventing debris intrusion around the vent

• Disconnect power and remove food/shelves to access the top rear vent area
• Remove retaining screws or release tabs; gently detach the cover without damaging nearby foam seals or wiring
• Transfer any reusable seals/inserts from the old cover; seat the new cover evenly for an airtight fit
• Reinstall shelves, restore power, and verify normal airflow/damper operation

Restore a stable shelf surface and smooth drawer operation with this refrigerator drawer cover. It sits above a lower compartment, supporting everyday items and helping keep spills and debris out of the drawer area. What it does:

• Forms the flat shelf surface above a lower refrigerator drawer
• Supports stored items and helps guide proper drawer movement
• Helps contain spills and prevents debris from entering the drawer compartment
• Replace if the cover is cracked, warped, or has broken tabs; drawer binds or won't close fully; shelf area is unstable

• 1 drawer cover

• Disconnect power and remove food from the affected area before servicing
• Slide out the lower drawer beneath the cover to access the part
• Carefully lift out the old cover, releasing any tabs or stops as needed
• Seat the new cover fully and reinstall the drawer; verify smooth operation
• Wear cut-resistant gloves when handling plastic edges

This replacement door gasket assembly restores the airtight seal around a refrigerator door to help maintain stable temperatures and reduce frost and moisture buildup. Use it to replace torn, warped, or leaking gaskets and improve sealing. What it does:

• Seals the refrigerator door to keep cold air in and warm air out.
• Helps reduce frost and moisture inside the compartment.
• Commonly replaced when the gasket is cracked, warped, compressed, or allows noticeable air leaks.
• Installing a good seal can help the appliance maintain set temperatures more consistently.

• Disconnect power and remove food/media from the door area before starting.
• Clean the door channel and gasket seating area to ensure proper adhesion/seating.
• Align the gasket evenly and engage all retaining tabs or adhesive per the original orientation.

This door basket mounts to the inner door of your refrigerator to store bottles, jars, and condiments. Replace a cracked or missing bin to restore secure, organized door storage and keep items from shifting as the door moves.

• Attaches to the door liner to hold beverages, jars, and condiments
• Restores usable door storage when the original bin is cracked, warped, or missing
• Helps keep items upright and accessible during opening and closing
• Common symptoms: broken/cracked bin, loose fit, falls off, or won't stay seated

• Empty the old bin; lift up and out to remove. Align the new bin on the door tabs and press down until fully seated
• No tools typically required
• Handle plastic carefully; avoid forcing or over-flexing the bin
• After install, distribute weight evenly and avoid overloading

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This door foam assembly replaces the damaged or missing insulation inside the refrigerator door to help restore proper temperature retention and reduce condensation. It fits behind the inner door liner and improves overall cooling performance. What it does:

• Replaces deteriorated or crushed door insulation to reduce cold air loss
• Helps prevent frost build-up and temperature fluctuations near the door
• Restores proper sealing performance when the liner is removed for repair
• Supports even interior temperatures and can improve energy efficiency

• Disconnect power to the appliance before starting any repair.
• Removal of the inner door liner is typically required; follow the manufacturer's service instructions.
• Handle the foam carefully to avoid tearing or puncturing; use appropriate adhesive/clips as specified.

Restore a tight seal on your refrigerator door with this door gasket assembly. A fresh, flexible gasket helps keep cold air in and warm air out, maintaining proper temperatures and reducing frost and moisture around the door.

• Creates an airtight seal between the refrigerator door and cabinet to maintain consistent cooling
• Helps reduce condensation, frost, and warm spots near the door
• May help if the door won't close fully, the gasket is torn or warped, or temperatures fluctuate
• Magnetized edge engages the cabinet for a secure seal when the door is closed

• Unplug the refrigerator before beginning; wear cut-resistant gloves
• Soften the gasket in warm water or with gentle heat to ease installation and improve fit
• Remove the old gasket carefully, noting retainer/channel orientation; press new gasket fully into the track
• Check door alignment and perform a dollar-bill test around the perimeter to confirm a uniform seal

This is the door-mounted storage bin for your refrigerator. It replaces a cracked or missing basket and restores safe, organized space for bottles, jars, and condiments so items stay secure and easy to reach.

• Mounts to the inner door liner to hold bottles, jars, and small items
• Restores proper door storage when the original bin is cracked, warped, or missing
• Helps keep items upright and accessible during normal door use
• Common signs it's needed: cracks, broken tabs, bin falls off, or won't seat securely

• Disconnect power to the refrigerator before servicing
• Empty the old bin; lift it up to release from the door slots
• Align the new bin's tabs with the slots and press down until it locks in place
• Verify a secure fit before loading; avoid overloading per your owner's manual

The door basket is an OEM replacement part for LG refrigerators. This part is designed to provide storage space on the lower portion of your refrigerator door, allowing you to neatly organize and store various items such as condiments, jars, and bottles. It offers a sturdy and reliable storage solution, ensuring that your items are securely held in place while still being easily accessible.

A bad door shelf bin can occur due to wear and tear, cracks, or breakage. If you notice symptoms such as a loose or wobbly shelf bin, difficulty in keeping items in place, or missing or broken parts, it's time to replace the the worn-out or damaged lower door shelf bin with this genuine OEM part.

Symptoms of a bad door shelf bin include:

• Loose or wobbly shelf bin
• Difficulty in keeping items in place
• Missing or broken parts

This OEM LG part can also be used on Kenmore/Sears appliances. 
 

This upper hinge assembly secures the top door to the cabinet and provides the pivot point needed for smooth, supported opening and closing. It restores proper door alignment and reduces rubbing or uneven gaps. What it does

• Provides a secure pivot and mounting point for the top refrigerator/freezer door.
• Keeps the door aligned to help maintain an even seal and proper closing.
• Reduces door sag, rubbing, or binding when opening and closing.
• Helps eliminate loose or noisy door movement caused by a worn hinge.

• Unplug the appliance or disconnect power before beginning work.
• Support or remove the door to prevent dropping; have a helper if needed.
• Basic hand tools required; follow OEM torque and alignment guidance—do not overtighten fasteners.
• Check door alignment and gasket seating after installation and adjust as needed.

This display cover assembly is the outer lens that protects and finishes the appliance control area, restoring a clean look and keeping the display and buttons shielded from moisture, grease, and wear. Fits as a direct replacement for a damaged or cracked cover. What it does

• Protects the control board and LED/LCD area from spills, dust, and physical damage
• Restores a clear viewing surface when the original cover is scratched, cracked, or fogged
• Helps maintain reliable button/touch operation by keeping contaminants away from controls
• Returns the appliance to an original finished appearance for cosmetic repairs

• High-level replacement: typically installs over the control panel and secures with clips or screws; exact fasteners vary by model
• Power off and unplug the appliance before starting any repair to avoid shock or circuit damage
• Handle the lens carefully to avoid scratching; use a soft cloth and appropriate cleaner for final cleanup
• Inspect and replace any removed adhesive or gaskets per OEM guidance

This display cover assembly replaces a cracked, scratched or cloudy console lens to restore a clear view and protection for the appliance display and touch controls. It keeps the control area sealed from dirt and moisture while preserving button visibility. What it does:

• Protects the display and control buttons from scratches, spills and everyday wear
• Restores clear visibility when the original cover is cracked, fogged or discolored
• Helps prevent moisture and debris from reaching the underlying electronics
• Keeps touch and push buttons aligned and easy to read

• One display cover assembly

• Disconnect power to the appliance before servicing to avoid shock or damage
• Remove the control panel or trim per the manufacturer's instructions to access the cover
• Handle the lens carefully to avoid fingerprints or scratches during installation
• Use only the specified replacement part and follow OEM guidance for reassembly

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

This holder secures the dryer-related assembly in place to reduce movement and wear, helping maintain proper alignment and quieter operation. It's a simple replacement that restores part stability in the appliance. What it does:

• Secures a dryer assembly or component to the appliance frame to prevent shifting
• Helps reduce vibration and rubbing noises caused by a loose part
• Maintains correct alignment so related parts operate smoothly
• Used when the existing holder is cracked, broken, or missing

• Disconnect power before replacing any dryer components to avoid shock or injury
• Access location and removal steps vary by model; follow the appliance's service manual or exploded view
• Keep fasteners and adjacent parts organized for reassembly; replace any damaged clips or screws

This fan guide directs airflow inside the appliance to improve cooling efficiency and protect the fan assembly. It replaces a worn or broken guide so the fan blades run without rubbing and airflow stays properly channeled. What it does:

• Channels air from the fan to the correct internal passageways for consistent cooling
• Keeps fan blades centered and prevents contact with surrounding components
• Helps reduce vibration and noise caused by a damaged or loose guide
• Common symptom: noisy fan, blade rubbing, or uneven cooling in the compartment

• One replacement fan guide

• Disconnect power before servicing to avoid shock or injury
• Remove access panels and the fan assembly to reach the guide
• Inspect adjacent fan blades and mounts for damage; replace any worn parts
• Reassemble panels and test operation before returning appliance to service

This fan assembly circulates air within the appliance to maintain steady temperatures and efficient cooling. Replacing a worn or noisy unit restores proper airflow, reduces hot or cold spots, and helps protect other components. What it does:

• Moves air through the appliance and across cooling components for even temperature distribution
• Helps remove heat and moisture as designed for efficient operation
• Replaces a seized, slow, intermittent, or noisy fan/motor assembly
• Common symptoms include weak or no airflow, temperature fluctuations, or abnormal humming/rattling sounds from the fan area

• 1 fan assembly

• Disconnect power before servicing; allow any iced or brittle plastic areas to warm/defrost
• Remove access panels/ducts as needed; note wire routing and take photos for reference
• Transfer any reusable brackets, grommets, or screws from the original assembly
• Ensure the blade spins freely and wiring is clear of the fan path before reassembly and testing

The Evaporator Fan Blade is an OEM replacement part for LG refrigerators. It is a key component located inside the refrigerator that works to circulate cold air evenly throughout. The fan blade spins rapidly to distribute chilled air from the evaporator coil and refrigeration system, ensuring proper airflow and consistent temperatures across all shelves and compartments.  

Symptoms of a bad evaporator fan blade include:

• Inconsistent or improper interior cooling temperatures 
• Hot or warm spots developing inside the refrigerator
• Strange noises such as clicking or grinding emanating from the rear wall

Causes of a bad evaporator fan blade can be wear and tear over time, an accumulation of dust or debris on the blades restricting airflow, or accidental damage like dents or cracks to the blades affecting their ability to spin smoothly.

This OEM LG part is also compatible with select Sears/Kenmore brand models.

The SWITCH, MAGNET is an OEM part for LG refrigerators. It is a switch designed to function in conjunction with the magnetic door seal, indicating to the refrigerator when the door is open or closed. This allows the refrigerator to regulate temperatures properly based on door positioning. 

Symptoms of a bad switch, magnet can include:

•  Temperature control issues, with the fridge struggling to maintain proper coolness levels
•  The fridge fails to switch to energy-saving modes when the door is closed 
•  Lights not turning on or off correctly when the door is opened or closed

Replace yours today with this genuine OEM LG part to ensure consistent and reliable temperature control. This OEM LG part is also compatible with Sears/Kenmore.

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

This DC motor assembly powers the appliance's drum/drive system, restoring rotation and normal operation when the original motor fails. Designed as a direct replacement to bring back reliable starting and consistent spinning. What it does

• Replaces a failed DC drive motor to restore drum or drum-driven movement
• Stops symptoms like no start, intermittent spinning, or a humming motor
• Helps eliminate grinding, unusual noises, or sudden stops caused by motor failure
• Works with the appliance's existing wiring and mounting points when compatible

• Disconnect power before attempting any repair to avoid electric shock.
• Handle the motor carefully; avoid pulling on wires or connectors.

The Fan Motor Assembly is an OEM part for LG refrigerators. It is responsible for circulating air throughout the refrigerator and freezer compartments to maintain consistent temperatures. By ensuring proper airflow, the fan motor helps to keep your food fresh and evenly cooled.

Over time, fan motors can wear out or become damaged due to factors such as dust buildup, electrical issues, or general wear and tear from continuous use. A faulty fan motor can lead to uneven cooling, increased energy consumption, and potential spoilage of food.

Symptoms of a bad fan motor include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures in the fridge or freezer
• The refrigerator running constantly or cycling on and off frequently
• Frost buildup in the freezer section

This OEM LG part is also compatible with Sears/Kenmore.

The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.

Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.  

Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:

• Unusual noises or vibrations from the back of the refrigerator.
• The evaporator motor shifting out of place, which can affect cooling efficiency.
• Increased wear on the evaporator motor due to lack of proper cushioning and support.

This OEM LG part is also compatible with some Kenmore models.

The Front Evaporator Motor Grommet is an OEM part for LG refrigerators. This grommet cushions and secures the evaporator motor, reducing vibrations and noise during operation to ensure efficient cooling.

Causes of a bad grommet can include prolonged use leading to material fatigue, exposure to extreme temperatures, or physical damage from accidental impacts. A damaged grommet can result in increased noise and potential misalignment of the evaporator motor.

Symptoms of a bad evaporator motor grommet include:

• Increased noise from the refrigerator
• Vibrations or rattling sounds
• Poor cooling performance
• The evaporator motor becoming loose

This OEM LG part is also compatible with Sears/Kenmore.

This main control board is the appliance's primary power and logic module, restoring control over cycles, power distribution and user commands when the original board fails. Use it to replace a faulty control/PCB assembly and regain normal operation. What it does:

• Manages power distribution and core control signals to motors, heaters and valves
• Interprets user inputs and runs the appliance's cycle logic
• Communicates status and error conditions to the user interface
• Common symptom match: appliance won't power on, won't start cycles, or shows intermittent/no control response
• Resolves intermittent operation, unexplained shutdowns or erratic cycle behavior when caused by a failed control board

• One main control board assembly

• Disconnect all power before starting work to avoid shock or damage
• Handle the board carefully; avoid static discharge and contact with exposed circuitry
• Some disassembly (control panel or console removal) and connector routing required

This sensor PCB assembly detects and relays sensor signals to the appliance control system, restoring accurate sensor feedback and communication when the original sensor board fails or malfunctions. Designed as a direct replacement board. What it does:

• Reads sensor inputs and converts them to signals the main control board can interpret.
• Replaces a failed or intermittent sensor board that causes incorrect readings or sensor-related error codes.
• Can resolve symptoms such as unexpected sensor faults, control errors, or appliances not responding to sensor changes.
• Matches the OEM board function; verify model compatibility before ordering.

• Always disconnect power before servicing to avoid shock or shorting the board.
• Use ESD precautions and handle the PCB by its edges to prevent static damage.
• Ensure all connectors are fully seated and the board is mounted in the original orientation.

This sub PCB assembly is an electronic control board that processes inputs and switches components, coordinating specific appliance functions. Replacing a failed board can restore normal operation and resolve dead controls, error codes, or intermittent, unpredictable behavior. What it does:

• Distributes and regulates control power and switches loads via onboard relays/triacs
• Interprets signals from sensors and the user interface to execute commands
• Coordinates timing and operation of related components per the appliance's program logic
• Failure may present as no power, won't start, unresponsive or flickering display, random beeps, or recurring error codes

• 1 sub PCB assembly

• Disconnect power to the appliance before servicing; verify no voltage is present
• Use ESD protection and handle the board by the edges
• Photograph wiring; transfer connectors one at a time and ensure they are fully seated
• Secure the board with existing fasteners/standoffs; perform any required reset or diagnostic per your model's service info

This deodorizer is the replaceable air-freshening module for LG refrigerators. It helps reduce common food odors inside the fresh-food compartment so stored items stay smelling fresher between cleanings. What it does:

• Reduces and neutralizes common refrigerator odors caused by food, spills, or leftovers.
• Treats circulating air inside the fresh-food compartment to limit lingering smells.
• Common symptom: persistent or recurring food smells despite routine cleaning.
• Works as a maintenance item to help keep the interior smelling fresher between replacements.

• Disconnect power or unplug the refrigerator before accessing or replacing the deodorizer.
• Handle the module carefully and seat it per the manufacturer's instructions; follow any disposal recommendations.

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

This ice dispenser assembly is the in-door module that channels ice through the dispenser and supports the operating components. Replacing a worn assembly restores reliable dispensing and helps reduce jams, leaks, and frost around the chute.

• Directs ice from the bucket through the chute to the dispenser outlet
• Houses and aligns the actuator/switch that engages the auger
• Maintains sealing around the chute to limit warm air and frost buildup
• Common symptoms: no ice dispensing, intermittent dispensing, lever unresponsive, ice clogs or frost at the dispenser opening

• Disconnect power and turn off the water supply before servicing
• Remove the dispenser bezel/control panel carefully to access the assembly
• Note wire connections and transfer any screws, clips, or gaskets from the original assembly as needed
• After reassembly, restore power and test both cubed and crushed ice dispensing

Replacement tube connector (mechanical) that secures and routes tubing in compatible LG appliances, helping restore proper fluid flow and reduce leaks from loose or damaged connections. A literal OEM-style connector used where a secure tube-to-component join is required. What it does:

• Joins and secures tubing to appliance components or chassis to maintain a stable connection
• Keeps tubing aligned to prevent kinks or dislodging that can interrupt flow
• Commonly replaced when you see dripping, visible leaks, loose tubing, or poor water flow
• Fits the original mounting interface for reliable mechanical retention

• Disconnect power and shut off the water supply before starting any repairs
• Inspect tubing and nearby fittings for damage; replace any compromised tubing before installing the connector
• Seat the connector fully and secure per the appliance's service instructions; avoid overtightening which can damage tubing
• After installation, restore water and power and check the connection for leaks during a short test cycle

This water inlet valve assembly controls incoming water to the appliance, allowing timed fills for normal operation and helping prevent overfill. A direct-replacement valve that restores proper water routing and fill performance. What it does

• Opens and closes to let water into the appliance during fill cycles.
• Stops water flow when fill is complete to prevent overfilling.
• Commonly replaces valves that fail to open (no water fill) or stay open (continuous filling).
• Can help stop leaks caused by a failed valve body or seals.

• One complete water inlet valve assembly as shown.

• Disconnect power and shut off the water supply before starting any repair.
• Install only the exact replacement part number.
• Tighten hose fittings and check electrical connectors for proper seating to avoid leaks or poor operation.
• After installation, restore power and water, run a short fill cycle and inspect for leaks.

This connector tube is a molded inline water connector used on select refrigerators to join water lines and help deliver water to the dispenser or ice maker. It restores a secure path for water flow and helps stop leaks. What it does

• Joins two sections of the refrigerator water line to maintain continuous water flow.
• Creates a sealed connection to prevent dripping or leaking at a damaged or worn joint.
• Helps restore water delivery to the ice maker or dispenser when a broken connector is the cause.
• Compatible with the refrigeration plumbing layout where a short molded connector is required.

• One connector tube as shown.

• Turn off the water supply and unplug the appliance before starting work.
• Inspect tubing ends and fittings; trim damaged tubing and use correct push-fit or compression fittings as required.
• Tighten connections securely but avoid overtightening plastic fittings; check for leaks after restoring water.

This electrical wire-harness connector links wiring to the appliance's control or component, restoring a secure electrical connection and helping eliminate intermittent power, no-start, or erratic component behavior. What it does:

• Provides a secure mating point between the wiring harness and an appliance control, motor, or sensor
• Restores reliable electrical contact when the original connector is damaged, corroded, or loose
• Can stop symptoms like intermittent operation, loss of power to a component, arcing, or related error codes
• Designed to match the OEM shape and terminal arrangement for a direct replacement

• One connector

• Disconnect power (unplug or switch off circuit breaker) before servicing to avoid shock
• Verify the connector matches the original by comparing terminal count, shape, and wire colors before installation
• Inspect mating terminals and wiring for damage; repair or replace harness wires if needed