Magic Chef Range / Cooktop / Oven Parts

This inner oven door glass replaces a cracked or cloudy panel to restore a clear view into the oven and help maintain proper door sealing. Fits models that use the WP7902P444-60 / 208970 assembly. What it does:

• Replaces damaged, cracked, or fogged inner oven door glass to improve visibility and appearance.
• Helps maintain the oven door's barrier between the cooking cavity and room air.
• Can reduce heat loss from a compromised door glass when properly installed.
• Safe, durable glass designed for oven-door use per OEM specification.

• One inner oven door glass panel

• Disconnect power to the appliance before starting any repair.
• Remove the oven door per the manufacturer's instructions to access the inner glass; follow OEM guidance for disassembly/reassembly.
• Handle glass with care and wear cut-resistant gloves and eye protection.
• If screws, clips or gaskets appear damaged during disassembly, replace them with matching OEM parts.

This high-limit thermostat (hi-limit switch) is a temperature safety device that stops the heating circuit if the appliance overheats, helping protect the unit and restore proper heat control when replaced. What it does:

• Opens the heating circuit if internal temperature exceeds safe limits to prevent overheating.
• Controls whether the heater/element receives power based on temperature.
• When faulty, common symptoms include no heat or intermittent heating and repeated thermal cutouts.
• Can be tested for continuity to confirm electrical function.

• One high-limit thermostat (hi-limit switch).

• Disconnect power before inspecting or replacing; risk of shock or injury if energized.
• Note and label wire locations or take a photo before removal for correct reassembly.
• Verify part compatibility with your model before installing; confirm continuity after installation.

This thermostat knob is the front control dial that lets you set an appliance's temperature and restore easy, accurate temperature selection. It replaces a worn, cracked, or hard-to-turn knob so controls respond like new. What it does

• Provides a secure grip for turning the thermostat or temperature control
• Aligns with the control shaft to show and select temperature settings
• Fixes symptoms such as a loose, cracked, or stuck knob and difficulty changing temperature
• Restores tactile feedback and clear position indication when selecting settings

• Disconnect power or unplug the appliance and allow it to cool before servicing.
• Most knobs simply pull straight off the control shaft; align the indicator and push fully on until seated.
• If the knob uses a retaining clip or keyed shaft, match orientation before pressing on.

Color: Black. Set of 4(four).By Maytag/Magic Chef. Set of 4 black square grates for gas ranges / cooktops. Fits many brands, including Maytag, Magic Chef, Admiral, Crosley, Norge, Jenn Air and others. Matching set of chrome drip pans: 1430283.

A replacement oven rack that restores stable support for cookware and baking pans, helping maintain even cooking and safe handling. Designed to fit the original rack slots for reliable, everyday oven use. What it does

• Provides a stable shelf for cookware, bakeware and roasting pans.
• Replaces bent, rusted or damaged racks that catch or tilt during use.
• Helps restore proper airflow and consistent cooking when racks sit level.
• Visible, functional repair that avoids sliding or sticking when moving trays.

• Fits into existing oven rack slides; remove old rack by sliding out and lifting if needed.
• No tools required for typical replacement; handle with oven mitts if warm.
• Inspect rack stops and guide rails for damage before installing.
• Follow oven manufacturer safety guidelines: disconnect power or ensure appliance is cool before servicing.

This screw is a factory-style mounting fastener used to secure appliance panels and components. It replaces worn, stripped, or missing screws to restore proper fit and reduce rattling. What it does:

• Secures panels, brackets, or trim to the appliance frame
• Keeps components aligned to prevent vibration and noise
• Replaces damaged or corroded fasteners that can cause loose parts
• Helps maintain safe, stable operation of moving or load-bearing assemblies

• Turn off power and unplug the appliance before servicing
• Use the correct driver bit and match thread engagement to avoid stripping
• Tighten snugly but avoid over-torquing which can crack plastic or strip threads
• Wear eye protection and keep small parts away from children and pets

Screw (bur) is a fastener that secures panels, brackets and small assemblies on select Whirlpool appliances. Replacing a missing or damaged screw restores proper fastening and helps reduce vibration, rattling and misalignment. What it does:

• Fastens panels, mounting brackets and small internal or external components to the appliance frame.
• Replacing a stripped or missing screw prevents loose parts and restores a secure fit.
• Symptoms of a failing screw include rattling, vibration, panels or trim that do not sit flush, or components that move during operation.
• Commonly used where a short machine screw or trim fastener is required for assembly.

• Disconnect power before beginning any service.
• Use the correct screwdriver or driver bit and install straight to avoid stripping the head or threads.
• Do not overtighten — snug until secure to prevent damage to threads or parts.
• Keep removed fasteners organized and replace any damaged screws with the exact OEM fastener.

Replacement burner knob that restores user control and appearance for surface burners. The white knob lets you select and adjust burner heat settings easily and replaces cracked, stripped, or missing original knobs. What it does:

• Provides a secure interface for turning and selecting surface burner heat settings.
• Replaces cracked, stripped, loose, faded, or missing knobs that are hard to turn or won't stay in place.
• Designed to match original knob fit and operation for compatible cooktop valve stems.
• Restores factory appearance with a white finish.

• Ensure all burners are off and the cooktop is cool; disconnect power at the breaker or unplug electric ranges before starting.
• Remove the old knob by pulling straight off the valve stem; align the replacement on the stem and press until fully seated.
• Do not force the knob onto the stem; if knob won't seat or is loose after installation, inspect the valve stem.

This replacement thermostat knob restores reliable temperature control and a secure grip on your appliance's temperature selector. It makes turning the thermostat smooth and precise so you can set cooking or cooling levels confidently. What it does:

• Replaces a cracked, stripped, or missing thermostat knob for straightforward temperature adjustments
• Provides a firm, non-slip grip to improve control when changing settings
• Stops slipping or loose knob operation that prevents accurate temperature selection
• Matches OEM fit and rotation profile for consistent operation with the original control shaft

• Always unplug the appliance or shut off power before replacing control parts
• Most installations are push-on: pull the old knob straight off the control shaft and press the new knob firmly into place
• If the old knob is stuck, use a gentle rocking motion or a knob puller; avoid excessive force that could damage the control shaft

This band motor is the motor assembly that powers the appliance's moving band or drive link, restoring the mechanism that enables normal rotating or indexing motion. Use it to replace a worn or failed motor for smoother operation. What it does:

• Drives the appliance's band/drive link so the linked components can rotate or index as designed
• Restores motion when the original motor is noisy, weak, or no longer turns
• Helps stop skipping or intermittent movement caused by a failed motor
• Works as the direct replacement motor when the OEM part is specified

• One band motor assembly

• Disconnect power before starting any repair to avoid shock or injury
• Installation may require removing panels and fastening the motor to the band/drive; keep hardware for reassembly
• Verify alignment and secure belt or band tension per the appliance's service instructions