Parts for Craftsman 486248400: Main Frame Parts

This is a replacement washer that can be used in many locations on lawn and garden machines. The washer is used as a means to help ensure that the screw or bolt does not loosen. It also helps to distribute the load from the nut, bolt, or screw over a larger area to help reduce the risk of damage to the machine. The washers could need to be replaced for many reasons. They might become bent or misshapen and need to be replaced. They could become corroded, or they might become lost while doing other repairs or maintenance on the machine. Replacing the washer tends to be an easy repair to make. This is a genuine OEM replacement part that is sold individually. Buyers might want to have several of these washers on hand. The washer can be used with many models of Lawn Mower, tiller, snowblower, chainsaw, edger, generator, log splitter, wood chipper, leaf blower, and other small engines. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. Owners should double-check to ensure they are getting the right sized washer for their needs.

This genuine OEM replacement auger bearing flange fits a wide range of snowblowers. The auger is the part of a snowblower that scoops up and moves it away from the area being cleared. It is held in place by a bearing, and this flange connects to the bearing to reduce friction and motion. This flange helps prevent grinding, which would degrade the bearing and cause the auger to stop working effectively. Bearings and flanges receive a lot of wear and tear because they are built to absorb friction. Over the natural course of an appliance's life, bearings and flanges will normally wear down and need replacing. If a bearing flange snaps, the auger will no longer turn, and the snowblower will not move snow. To replace a bearing flange, use a socket wrench to gain access to the belt cover and then detach the auger housing. Remove the pulley and thread, then take the auger out of its housing. Pull out the old auger bearing flange and install the new part. This part is compatible with Yard Man, Troy-Bilt, Craftsman, Bolens, MTD, Huskee, and Yard Machines snow blowers. It comes sourced from the original manufacturer and ships individually.

This part is a replacement shaft attachment. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current shaft attachment is defective or broken, this part can be used for repair or replacement. It is intended for use with a variety of lawn tractor models.This shaft attachment works to enable a lawn tractor to function as a snow blower. This part is critical if the user wishes to be able to use the equipment for the purpose of snow removal. If the shaft is broken or damaged in any way, it will be ineffective and should be replaced. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this shaft attachment, the appropriate owner's manual and equipment diagrams should be referred to. This shaft attachment is suitable for use on a variety of lawn tractor models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

This V-belt is a genuine Agri-Fab part. It is intended for use as a replacement part in a lawn tractor. The purpose of this genuine OEM part is to transmit power to the wheels of the lawn tractor so that it can move. If the V-belt is frequently slipping out of place, it could be damaged. Check if the teeth of the belt are chipped or worn down, or if the belt itself has stretched out of shape. With extended use, it could also tear or snap, outright.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This V belt is compatible with equipment manufactured by Agri-Fab.

This part is an idler pulley for lawn tractors with snow blower attachments. The idler pulley drives the impeller and the auger. A belt is looped onto the pulley and tension is applied to the belt. A new idler pulley may be needed if the user hears a chattering or squealing sound coming from the snowblower attachment. If the belt repeatedly comes loose from the pulley, it is possible that the auger has become worn out and is allowing it to slip off. However, a close inspection of both the belt and the idler pulley is required to determine which part needs to be replaced. Wear gloves when replacing this part and use caution.This component is sourced directly from the manufacturer as an OEM part and it is sold individually. This idler pulley is compatible with lawn tractor snowblower attachments that are manufactured by the Craftsman and Agri-Fab brands.