Parts for Craftsman 486248460: Main Frame Parts

This replacement part is a pin and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Agri-Fab. Even though they are small, pins are an important part of any machine. These typically hold other parts in place and secure as well as attach different parts together. A new pin might be needed if the user notices that part of the device are becoming loose or detached. Is it possible that the pin becomes stripped overtime after many years of normal wear and tear. It is common that pins also become loose and misplaced. Be sure the engine of the device is completely cooled down as these pins are often situated near the engine itself. This pin is sourced directly from the manufacturer to ensure that it correctly matches with the equipment used. This part is a genuine OEM replacement part and is sold individually.

This is a replacement washer that can be used in many locations on lawn and garden machines. The washer is used as a means to help ensure that the screw or bolt does not loosen. It also helps to distribute the load from the nut, bolt, or screw over a larger area to help reduce the risk of damage to the machine. The washers could need to be replaced for many reasons. They might become bent or misshapen and need to be replaced. They could become corroded, or they might become lost while doing other repairs or maintenance on the machine. Replacing the washer tends to be an easy repair to make. This is a genuine OEM replacement part that is sold individually. Buyers might want to have several of these washers on hand. The washer can be used with many models of Lawn Mower, tiller, snowblower, chainsaw, edger, generator, log splitter, wood chipper, leaf blower, and other small engines. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. Owners should double-check to ensure they are getting the right sized washer for their needs.

This is a replacement snowblower chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged, detached, or worn chute on various snowblower models. The snowblower chute expels snow from the equipment in order to clear the desired area. A damaged chute can prevent proper expulsion of snow. The chute is subject to significant wear and tear and may require replacement to ensure the snowblower can work properly. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this snowblower chute, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this chute is suitable for use on several different models of snowblowers manufactured by Craftsman, Yard Machines, MTD, and Troy-Bilt. This is a genuine part made of high-quality, durable plastic and is sold individually.

This upper discharge chute is a genuine MTD part, sold individually. This upper discharge chute can be used as a replacement part in a snowblower or an edger. The purpose of the upper discharge chute is to provide a channel through which the snow or greenery can be gathered and then dispelled by the equipment. The upper discharge chute in a snowblower or an edger might need to be replaced at some point within the typical lifespan of the appliance. This could occur if the upper discharge chute is punctured dented, cracked, eroded, or warped. If this occurs, the upper discharge chute should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This upper discharge chute is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

This part is an idler pulley for lawn tractors with snow blower attachments. The idler pulley drives the impeller and the auger. A belt is looped onto the pulley and tension is applied to the belt. A new idler pulley may be needed if the user hears a chattering or squealing sound coming from the snowblower attachment. If the belt repeatedly comes loose from the pulley, it is possible that the auger has become worn out and is allowing it to slip off. However, a close inspection of both the belt and the idler pulley is required to determine which part needs to be replaced. Wear gloves when replacing this part and use caution.This component is sourced directly from the manufacturer as an OEM part and it is sold individually. This idler pulley is compatible with lawn tractor snowblower attachments that are manufactured by the Craftsman and Agri-Fab brands.

This part is a replacement shaft attachment. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current shaft attachment is defective or broken, this part can be used for repair or replacement. It is intended for use with a variety of lawn tractor models.This shaft attachment works to enable a lawn tractor to function as a snow blower. This part is critical if the user wishes to be able to use the equipment for the purpose of snow removal. If the shaft is broken or damaged in any way, it will be ineffective and should be replaced. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this shaft attachment, the appropriate owner's manual and equipment diagrams should be referred to. This shaft attachment is suitable for use on a variety of lawn tractor models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

This is the ground drive belt for a lawn tractor with a snowblower attachment. This part is a durable replacement part. It connects the engine pulley to the transmission pulley. This allows the lawn tractor with the snowblower attachment to move forward. The ground drive belt may need to be replaced due to normal wear and tear over time. Exposure to cold temperatures in the winter may also cause the belt to dry out and crack. A visual inspection can locate any cracks or tears in the belt. If any are seen, it's a good idea to replace the belt. The user may also notice a squealing sound or the engine overheating if this part has gone bad.Sourced straight from the manufacturer, this ground drive belt is an OEM part and is sold individually. It is compatible with lawn tractors with snowblower attachments that are manufactured by Craftsman and Agri-Fab.