Parts for Kitchenaid KGRS206XSS3: 04 - Manifold Parts

This genuine OEM replacement part is an igniter for gas ranges. The igniter is the part that creates the flame allowing for the burners to produce the fire that heats and cooks food. If the stove is no longer sparking a flame, the igniter might need to be replaced. Luckily, this is a very simple repair. To replace this part, start by unplugging the range. Once unplugged, move the range away from the wall to access the upper back panel. Remove the screws that secure the panel and proceed to locate the igniter. Detach the wire harness that connects it, and pull it out of its position. Once removed, reattach the wire harness and put it back in its place. Reinstall the upper back panel and restore power to the range.This authentic replacement part is sourced directly from the manufacturer and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore brand ranges.

A replacement orifice holder that secures the burner orifice to the burner tube for properly aligned fuel flow and stable ignition. Restores correct burner positioning to help maintain even flame performance. What it does:

• Holds the burner orifice in place on the burner tube so fuel reaches the burner correctly
• Helps ensure a consistent, stable flame and proper ignition
• Can correct symptoms like uneven flames, burner misalignment, or difficulty lighting
• Fits into the burner assembly where the orifice mounts to the burner tube

• One orifice holder

• Turn off gas supply and electrical power before beginning any repair
• Replace only with the exact part; verify orientation and seating of the orifice in the holder
• Use basic hand tools; avoid overtightening to prevent damage
• If you smell gas or suspect a leak after installation, stop.

This orifice holder secures the burner orifice to the gas valve/burner assembly to keep the orifice positioned for consistent gas flow and reliable ignition. It helps maintain stable flame placement and safe operation of the burner. What it does:

• Holds the burner orifice in the correct position for steady gas flow
• Keeps the orifice aligned to promote consistent ignition and flame shape
• Prevents the orifice from shifting or loosening during use
• Can help address symptoms such as uneven flame, intermittent ignition, or difficulty lighting

• One orifice holder

• Turn off gas supply and electricity to the appliance before starting work
• Replace only with the correct part number and orientation; use care when seating the orifice
• Hand-start fasteners, then snug—do not overtighten to avoid damage
• After installation, check for gas leaks with a soapy water solution and test burner operation

This speaker module produces the audible tones and chimes used by the appliance control panel so you can hear status alerts and user feedback. It replaces a failed or silent chime assembly to restore audible notifications. What it does:

• Generates beeps, chimes, and alert tones from the control panel for cycle and error notifications
• Restores audible feedback when the control board is sending signals but no sound is heard
• Helps identify control or cycle status without watching the display
• Works with the control/display assembly to communicate user inputs and alerts

• One speaker module

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle the module and surrounding wiring gently; avoid bending contacts or pulling on wires
• Reconnect wiring harnesses and secure mounting fasteners; ensure proper seating in the control housing
• If sounds still do not work after replacement, further diagnosis of the control board or wiring may be needed