Mastercraft Parts

Flange bearing supports rotating shafts in snow blower drive systems. Replace if worn, noisy, or causing wobble. Verify fit with your model number.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

Throttle control cable for lawn tractors and tillers. Connects throttle lever to engine carburetor. Replace if cable is frayed, broken, or stuck.

Replacement steering tie rod for lawn tractors. Connects steering components for proper wheel alignment. Replace if bent, damaged, or worn for safe operation.

Fastener spacer for lawn mowers and snow blowers. Creates proper gap between components to reduce friction. Replace if lost, cracked, or worn.

Bevel gear transfers power between the engine and drive system in lawn tractors. Replace if you notice grinding noises or power loss. Verify fit with your model.

This casing clamp is a genuine MTD part, sold individually. This casing clamp can be used as a replacement part in lawn mowers, snowblowers, and tillers. The purpose of a casing clamp for one of these outdoor appliances is to affix the governor control plate to the tank assembly so that it remains stably placed throughout the standard operation of the appliance.If the casing clamp is subject to damage in the form of puncturing, denting, cracking, warping, or eroding over time, it should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This casing clamp is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Bolens, and MasterCut.

Blade adapter kit for walk-behind and self-propelled mowers. Replaces worn, stripped, or broken adapters that connect the blade to the drive shaft.

Rubber spiral auger kit for snow blowers. Replace when rubber paddles are worn, cracked, or no longer effectively move snow. Confirm fit with your model.

This pivot bar is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, and chipper shredders. The pivot bar provides a means of steering the outdoor appliance.A pivot bar might have to be replaced if it suffers damage over time. Although there is not often a need to replace a pivot bar, as it holds up well to general usage and exposure to the elements, a pivot bar might have to be replaced if there is a collision or a traumatic impact as a result of a drop from significant height or onto a particularly hard surface. Additionally, a pivot bar might have to be replaced if there is deterioration in the spindle bushing, thereby exposing the pivot bar to potential damage. If this occurs, a replacement pivot bar part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This pivot bar is compatible with the following brands: MTD, Yard Man, Bolens, and Yard Machines.

Replaces cracked or broken blade height adjustment brackets on walk-behind mowers. Secures cutting deck leveling mechanism. Needed when missing or worn.

Flat idler pulley applies tension to your snowblower's belt for proper operation. Replace if noisy, seizing, or causing belt issues. Verify fit by model.

An idler pulley is an essential part of many small and medium sized gasoline powered tools. This idler pulley is used in equipment such as tillers, lawn tractors, log splitters, edgers, snow blowers, and trimmers. The idler pulley is necessary so that the engine can run without the tool's moving parts being engaged. For instance, a lawn tractor running without the cutting blades turning or the wheels rolling. Once the idler pulley is engaged, the blade begins to turn. There is a great deal of resistance encountered by the idler pulley each time the equipment's tools begin to turn. Over time, the pulley can become worn and will eventually need to be replaced. If there is a squealing sound whenever the moving parts of a lawn tool are engaged, it is probably a sign that the idler pulley is about to fail. The pulley itself is attached to the engine housing with 9/16 hex bolts and requires an adjustable wrench and 9/16 ratchet to remove and replace. Always use a genuine OEM manufactured replacement part such as this one when replacing the original, as this part is identical to the original. This part is compatible with equipment manufactured by Bolens, MTD, Cub Cadet, Huskee, and Troy Bilt.

This pulley is a genuine MTD part, sold individually. This pulley can be used as a replacement part in a lawn mower or a wood chipper. The purpose of this pulley in a lawn mower or a wood chipper is to allow the spindle to rotate so that the blades of the lawn mower can rotate and facilitate the fine chopping of wood or mowing of greenery on a variety of surfaces when the appliance is in operation.The pulley in a lawn mower or a wood chipper might need to be replaced if the pulley can no longer regulate the rotation of the spindle assembly. This could occur if the pulley is dented, cracked, warped, eroded, or otherwise damaged to the point of reduced or no functionality; if this occurs, the pulley should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual or handbook.This is a genuine OEM from the manufacturer. It is sold individually. This pulley is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.