Mcculloch Leaf Blower Parts

This throttle linkage is a genuine Husqvarna part, sold individually. This throttle linkage can be used as a replacement part in a leaf blower. The purpose of the throttle linkage in a leaf blower is to affix the throttle control to the carburetor so that the carburetor and throttle can work in unison to provide power to the engine and control the speed of the appliance as it is propelled forward across a variety of surfaces.The throttle linkage in a leaf blower might need to be replaced if the throttle linkage has permanently detached from its stable position within the throttle controls of the appliance or if the throttle linkage has suffered irreparable damage. If the throttle linkage is not serving its function and cannot be repaired, the throttle linkage should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This throttle linkage is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This vacuum door spring is a genuine Husqvarna part, sold individually. This vacuum door spring can be used as a replacement part in a leaf blower. The purpose of the vacuum door spring in a leaf blower is to allow the opening and shutting of the vacuum door so that the door does not swing open of its own volition and remains shut while the appliance is in use.The vacuum door spring in a leaf blower might have to be replaced if it shows signs of damage that renders the spring incapable of producing its typical function during the standard use of the appliance. If the vacuum door does not remain shut due to damage, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This vacuum door spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This part is a replacement wire harness. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current wire harness is broken or malfunctioning, this part can be used as a replacement. It is intended for use with a variety of leaf blower models. The wire harness is critical for the proper functioning of the equipment, as it is an electrical component that supplies power to the leaf blower. The equipment may not turn on if the wire harness is snapped, stretched, or defective in any way. When working on or to an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this wire harness, the appropriate owner's manual and equipment diagrams should be referred to. This wire harness is suitable for use on a variety of leaf blower models manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This replacement part is a tube blower and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Tube blowers are typically found on leaf blowers and allow the user to direct high speed air toward the debris they need cleared. A new tube blower might be needed if the current one is damaged or broken in any way including being cracked or dented. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This vacuum door cover is a genuine Husqvarna part, sold individually. This vacuum door cover can be used as a replacement part in a leaf blower. The purpose of the vacuum door cover in a leaf blower is to house and protect the area in and around the leaf blower's vacuum.If the vacuum door cover has been dented, cracked, punctured, torn, ripped, warped, or eroded to the point that the vacuum is exposed, the vacuum door cover should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This vacuum door cover is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement air filter is designed as a replacement for select lawn and garden engines. This filter is located near the carburetor and is responsible for filtering the air that comes into the engine. The dense foam catches particles, debris, and residues so that only the purest air gets in the carburetor for optimal performance. Over time, air filters become clogged with regular use, so replacing them is considered a part of routine maintenance. However, they also may need to be replaced intermittently. If the engine is not running properly or there are visual signs of a dirty air filter, this part can offer a replacement for compatible engines. This OEM foam air filter is compatible with select engines from Husqvarna, including those on leaf blowers from Craftsman, Poulan and Poulan Pro, AYP, and Weed Eater. Always allow the engine to cool completely before starting repairs and wear gloves for hand protection at all times. Replacing the air filter is a simple task that doesn’t usually require tools. This replacement part is sold individually and comes as a single unit.

This part is a high speed restrictor nzle that is used on blowers. The restrictor style of nzle concentrates the air stream for increased power by acting as a funnel. This nzle is twisted onto the lower blower tube. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Use caution when working with any outdoor power equipment.A new high speed restrictor nzle may be needed if the original is cracked, broken, or damaged in any way. If the nzle will not turn to lock into the lower blower tube, both parts should be inspected to determine which component needs to be replaced. This high speed restrictor nzle is a genuine Husqvarna part. It is sold individually. This specific high speed restrictor nzle is compatible with blowers that are manufactured by Craftsman, Husqvarna, Poulan, McCulloch, and Weed Eater.

This connecting rod is a genuine Husqvarna part, sold individually. This connecting rod can be used as a replacement part in a leaf blower. The purpose of the connecting rod in a leaf blower is to affix the crankshaft to the piston so that the force of the piston is transmitted into the crankshaft to create a fully functioning and rotating mechanism.The connecting rod in a leaf blower might go bad over time from general wear and tear or as the result of a collision with a hard object such as a curb or a rock. If the connecting rod suffers damage in the form of puncturing, denting, cracking, warping, or eroding to the point of reduced or no functionality, the connecting rod should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the leaf blower.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This connecting rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This genuine replacement choke lever is designed for use on specific gas-powered blowers. The choke lever attaches to the choke shaft of the carburetor, allowing the user to restrict the airflow and control the speed of the blower. This is a part that is subject to frequent use, so it can tend to wear over time or become broken just from regular operation. When the choke lever isn't operational, there will be no control over the airflow or the speed of the blower motor. This could also lead to other engine issues, which is why this replacement lever should be purchased and repaired immediately. This OEM choke lever is manufactured to exact standards. It will work with a variety of machines from Poulan and Husqvarna. The replacement part is made of durable plastic and sold individually. To replace the lever, simply push the new lever into the choke shaft until it snaps into place. Always wear gloves and allow the engine to cool completely before performing repairs or parts replacements.

This replacement part is a piston ring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in grass trimmers and backpack blowers. This is an important part of the piston assembly and helps the engine operate properly and efficiently. These rings provide a seal around the piston and the walls of the cylinder. A new piston ring might be needed if the current ones are becoming loose and falling off the cylinder. If the seal around the rings is not tight, this can cause issues within the engine and the user might not be able to operate the machine properly. If the compression is reduced because of the rings, the engine will not run.This piston ring is sold individually. This is a genuine OEM replacement part and is sourced directly from the manufacture. This ensures proper fit in many different appliances.

This ignition coil assembly is a genuine Husqvarna part, sold individually. This ignition coil assembly can be used as a replacement part in a leaf blower. The purpose of the ignition coil assembly in a leaf blower is to transfer the electrical voltage of the battery toward the spark plugs so that the spark plugs can ignite and power on the engine of the leaf blower.The ignition coil assembly in a leaf blower might need to be replaced if the ignition coil assembly no longer is able to serve its critical function toward the powering on of the small engine of the leaf blower. This could occur if the ignition coil assembly is sufficiently damaged in the form of puncturing, scraping, denting, ripping, tearing, fraying, or eroding to the point of reduced functionality. If this occurs, the ignition coil assembly should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This ignition coil assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This replacement part is a filter and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is used in backpack blowers, trimmers, or edgers. This filter is important to the engine as it is placed around the air filter and prevents any debris or dirt from entering the carburetor. When this filter becomes dirty it can compromise the use of the carburetor and therefore cause issues with the engine. Be sure the engine is powered off before replacing a filter. It is recommended that filters be replaced frequently. Be sure to refer to the specific manual for the appliance for help on replacing this part. This filter is an OEM replacement part sourced directly from the manufacture. This part is sold individually.

This is a carburetor that can work with several types of handheld lawn and garden tools. Carburetors are responsible for ensuring that there is a correct mixture of air and fuel for combustion in the engine. If the owner notices that their equipment is having trouble starting or running continuously, there could be an issue with the carburetor.Carburetors are made from quality materials and are made to last. However, parts of the carburetor can start to wear down over time. In some instances, corrosion could occur, or the bulb could crack. If there are any problems with the carburetor, it should be replaced as soon as possible. Otherwise, owners will have trouble getting their machines started.The carburetor will work as a replacement for select models of blower and trimmer from Husqvarna and Poulan. The part is sold individually. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This part is a replacement middle pipe. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective middle pipe in leaf blowers.The middle pipe connects the nzle to the leaf blower and allows a stream of air to be ejected from the equipment. This part may become detached, cracked, or otherwise ineffective over time, requiring replacement. When working on or near an engine it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this middle pipe, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality plastic. This middle pipe can be used with different models of leaf blowers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

This is a fuel cap that is used with several types of small engine lawn and garden equipment. The purpose of the fuel cap is to make sure that all gasoline in the fuel tank stays in place and there are no leaks present. The fuel cap can experience wear and tear over time or become cracked, broken, or damaged if it impacts other items. If fuel can be smelled through the cap, if the cap doesn't tighten, or if it is otherwise visibly damaged, the fuel cap should be replaced.Prior to replacement or even removing the fuel cap, the equipment should be placed in a well-ventilated area. It's also important to disconnect the spark plug wire to create a safe environment. Empty any fuel in the tank into an appropriate container before moving on. Once empty, you can replace the old cap with a new one.This is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold as a single fuel cap. The part is created to be compatible with string trimmers, hedge trimmers, and leaf blowers manufactured by Poulan, Poulan Pro, and Craftsman.

A combustion engine will create a lot of pressure by igniting fuel and air with a spark. It features pistons beneath the valves and the cylinder block. Between these areas are the piston rings that have many purposes that include keeping gas compression between the piston and the wall of the cylinder, keeping a layer of lubrication on the inside of the engine, allowing adequate heat transfer, and supporting the piston inside the cylinder. This replacement piston ring is designed for use in a long list of edgers, trimmers, and blowers. It is compatible with Husqvarna, Poulan, and Craftsman machines. This is an OEM replacement part that will require a complex set of steps to install properly. It will require the use of torque wrenches, plug wrenches, pliers, screwdrivers, a mallet, and more to do the repair. It ships individually.