Mcculloch Leaf Blower Parts

This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

A crankcase seal is what prevents the oil from leaking between the crankcase opening and the crankshaft. It is often found on the engine's front or underside and seals the timing cover to the crankshaft. Oil seals may become damaged or worn with use. Bearing seizures and grinding indicate that the crankcase seal should be replaced. If there is oil leaking from the crankcase or on the crankshaft, a replacement crankcase seal is necessary.Wear gloves and be sure to collect all the tools needed prior to starting a replacement. Replacing a crankcase seal requires Torx wrenches, a container for fuel, spark plug socket or wrench, adjustable or 10-millimeter wrench, rubber mallet, long-nosed pliers, screwdriver, adjustable pliers, socket set, starter rope, 2-cycle engine oil, ignition gapping gauge, and a razor blade. Follow the operator manual for specific directions.The crankcase seal is a genuine OEM part. It is sold individually. The crankcase seal is black, round, and made from durable, high-quality plastic and metal for extensive use. It can be used in a variety of lawn equipment, including leaf blowers, trimmers, hedge trimmers, and vacuums. It is compatible with various manufacturers, including Craftsman, Husqvarna, Weed Eater, RedMax, and Poulan Pro.

This bearing is a genuine Husqvarna part, sold individually. A bearing can be used as a replacement part for outdoor appliances including string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The purpose of this genuine OEM part is to facilitate the rotation of one or more components within one of these outdoor appliances.If the bearing has been punctured, dented, cracked, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bearing is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Paramount, and Turf King.

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

This is a replacement purge bulb. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective purge bulb on various models of outdoor power equipment. The purge bulb purges air from the carburetor and draws in fuel from the fuel tank to allow the engine to start. Over time, the purge bulb can crack or become brittle, requiring replacement. Proper tools are required to replace this part and work gloves are advised. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this purge bulb, the appropriate owner's manual and included diagrams should be referenced. As an authentic replacement part, this purge bulb is suitable for use on several different models of small engine power equipment such as string trimmers, leaf blowers, and edgers manufactured by Husqvarna, Craftsman, WeedEater, and Poulan. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.

This part is a lower tube for a lawn and garden blower or vacuum. The lower tube directs the lawn and garden debris into the collection bag.A new lower tube will be needed if the original is cracked, broken, or damaged in any way. If the lower tube is broken, the lawn and garden debris will not be directed into the collection bag and so the device will not be operating as it is supposed to. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This lower tube is a genuine Husqvarna part. It is sold individually. This specific lower tube is compatible with lawn and garden blowers and vacuums that are manufactured by the Husqvarna and Craftsman brands.

Blowers are often designed with gas-powered engines. When a blower has adequate fuel, but the engine does not start, it could be a problem with the carburetor. This is the part that mixes air and fuel to send into the engine. If an engine starts and dies or fails to start at all, the carburetor may need replacement. This replacement for a blower carburetor works with Craftsman and Poulan blowers, and is compatible with a long list of models. This is an OEM replacement part that features a metal body and which incorporates the rubber primer bulb necessary to begin the starting process. It ships individually and is will require pliers and a screwdriver to make the repair.

This piston kit is an important component for many brands of gas-powered leaf blowers. The piston is tasked with separating the combustion chamber of the engine from the crankcase and the connecting rod that drives the crankshaft. As a kit, this product comes with both the needle bearing and the rod pin needed to replace the piston components. If a leaf blower is no longer starting, it could be related to this component. If that's the case, it will need to be replaced.The piston kit can be used to replace a damaged piston. A wrench set and a screwdriver will be required to make the replacement. Start by placing the leaf blower on a solid surface and removing the spark plug wire. After disassembling the leaf blower to gain access to the engine, the engine will also need to be disassembled to put in the new piston kit components.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as a single component. The piston kit is designed to fit leaf blowers manufactured by Poulan, Poulan Pro, Craftsman, and Weed Eater.

This carburetor adaptor is a part, sold individually. This carburetor adaptor can be used as a replacement part for the small engine of a leaf blower or a leaf vacuum. The function of a carburetor adaptor for a leaf blower or a leaf vacuum is to create separation between the carburetor and the manifold which can improve the rate at which the carburetor mixes the air and fuel taken into the engine with the purpose of igniting the spark plugs to turn on the engine.A carburetor adaptor might have to be replaced in the event that it suffers damage in the form of cracking, puncturing, or corrosion to the metal material that loosens its attachment to the carburetor flange or the manifold flange. If this damage occurs, the carburetor adaptor should be removed, and this genuine OEM replacement part should be ordered immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is a genuine OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. This carburetor adaptor is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This OEM lower leaf blower tube attaches to the upper blower tube to create a long tube used to project the air from the blower. The lower leaf blower tube is the part that is located farthest from the machine itself. The upper leaf blower tube is located closest to the machine.The lower leaf blower tube may need to be replaced if it is lost or if the plastic is broken for any reason. If broken, it cannot be repaired but must be replaced. Remember to wear gloves when operating or replacing parts on any lawn machine equipment.This is a genuine Husqvarna part sourced directly from the manufacturer. This lower leaf blower tube is compatible with leaf blowers manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater. Please note that this is sold individually and only includes the lower tube; the upper tube must be purchased separately in the event that it's needed.

This starter rope tube is a genuine Husqvarna part, sold individually. This starter rope tube can be used as a replacement part in a leaf blower. This part houses the starter rope.The starter rope tube might eventually have to be replaced if it cannot hold the pull rope due to damage to the material of the tube. If the starter rope tube is punctured, dented, warped, or eroded to the point that the rope cannot pass through the tube or that a portion of the tube is exposed, the starter rope tube should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This starter rope tube is compatible with the following outdoor appliance brands: Husqvarna, Weed Eater, Craftsman, Poulan, and Poulan Pro.

This replacement part is an airbox cover and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Airbox covers are an important part to most lawn equipment. This specific part is intended to cover the parts of the airbox that can be dangerous for the user or those around them.A new airbox cover might be needed if the current one is damaged or broken in any way including being cracked or dented. It is possible that the airbox cover can become broken after years of normal wear and tear as typically it is exposed to rough terrain. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This throttle linkage is a genuine Husqvarna part, sold individually. This throttle linkage can be used as a replacement part in a leaf blower. The purpose of the throttle linkage in a leaf blower is to affix the throttle control to the carburetor so that the carburetor and throttle can work in unison to provide power to the engine and control the speed of the appliance as it is propelled forward across a variety of surfaces.The throttle linkage in a leaf blower might need to be replaced if the throttle linkage has permanently detached from its stable position within the throttle controls of the appliance or if the throttle linkage has suffered irreparable damage. If the throttle linkage is not serving its function and cannot be repaired, the throttle linkage should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This throttle linkage is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This vacuum door spring is a genuine Husqvarna part, sold individually. This vacuum door spring can be used as a replacement part in a leaf blower. The purpose of the vacuum door spring in a leaf blower is to allow the opening and shutting of the vacuum door so that the door does not swing open of its own volition and remains shut while the appliance is in use.The vacuum door spring in a leaf blower might have to be replaced if it shows signs of damage that renders the spring incapable of producing its typical function during the standard use of the appliance. If the vacuum door does not remain shut due to damage, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This vacuum door spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.